Study guide

16.1 Dosage Calculations

APC Intern Written Examination Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 Pathway to General Registration 1.3 Restricted Open-Book Strategy (AMH & APF) 1.4 Scoring, Results & Appeals

2 Legal Framework: PBS & Medicine Schedules

2.1 PBS, Authority Prescriptions & Special Access Scheme 2.2 Schedules 2 & 3 (Pharmacy & Pharmacist Only Medicines) 2.3 Schedules 4 & 8 (Prescription Only & Controlled Drugs)

3 Legal Framework: Privacy, National Law & Pharmacy Board

3.1 Privacy, Confidentiality & Patient Rights 3.2 Health Practitioner National Law & Registration 3.3 Pharmacy Board Codes, Guidelines & Standards

4 Patient-Centred Medication Management

4.1 Assessing Clinical Situations & Treatment Options 4.2 Patient Factors: Adherence, Efficacy & Safety 4.3 Drug & Dosage-Form Factors 4.4 Culturally Responsive Medication Management

5 Primary Care & Judicious Use of Medicines

5.1 Primary Care & OTC Assessment 5.2 Judicious Use of Antimicrobials & High-Risk Agents 5.3 Non-Pharmacological Options & Evidence-Based OTC Choices

6 Dispensing & Clinical Appropriateness

6.1 Prescription Evaluation 6.2 Clinical Appropriateness Checks 6.3 Labelling, Packaging & Dispensing Standards 6.4 Communicating with Prescribers & Documenting Changes

7 Counselling & Acute Care

7.1 Patient-Centred Counselling 7.2 Confirming Understanding & Lifestyle Counselling 7.3 Acute Illness, Injury & Emergency Response

8 Therapeutics: Cardiovascular & Endocrine

8.1 Hypertension & Heart Failure 8.2 Ischaemic Heart Disease & Anticoagulation 8.3 Diabetes Medicines 8.4 Thyroid & Lipid Disorders

9 Therapeutics: Infection, Respiratory & Gastrointestinal

9.1 Anti-Infectives & Infection Management 9.2 Asthma & COPD 9.3 Gastrointestinal & Hepatic Conditions 9.4 Vaccination & Travel Health

10 Therapeutics: Neurology, Psychiatry & Pain

10.1 Epilepsy & Movement Disorders 10.2 Depression, Anxiety & Psychosis 10.3 Pain Management & Opioids 10.4 Migraine & Common Analgesics

11 Therapeutics: Special Populations & Systems

11.1 Women's Health, Contraception & Pregnancy 11.2 Dermatology, Ophthalmology & ENT 11.3 Renal/Hepatic Impairment & Dose Adjustment

12 Therapeutics: Rheumatology, Haematology, Urology, Oncology & Toxicology

12.1 Rheumatology: Gout, Osteoarthritis & Inflammatory Arthritis 12.2 Haematology: Anaemias & Blood Safety Monitoring 12.3 Urology & Men's Health 12.4 Oncology Support & Oral Anticancer Medicines 12.5 Toxicology & Poisoning Management

13 Monitoring: Clinical Review

13.1 Clinical Review Process 13.2 Interpreting Laboratory & Clinical Monitoring 13.3 Recommending Treatment Modifications

14 Monitoring: Safety & Adverse Drug Reactions

14.1 Adverse Drug Reactions & Reporting 14.2 Allergies, Sensitivities & Cross-Reactivity 14.3 High-Risk Medicines Monitoring

15 Compounding Medicines

15.1 Determining Required Formulations 15.2 Compounding Standards & Quality 15.3 Patient-Specific Preparations

16 Pharmaceutical Calculations

16.1 Dosage Calculations 16.2 Concentrations, Dilutions & Alligation 16.3 Half-Life & Basic Kinetic Calculations

17 Promote Health & Well-Being

17.1 National & Local Health Priorities 17.2 Screening Programs & Pharmacist Role 17.3 Culturally Responsive Promotion & Self-Sufficiency

16.1 Dosage Calculations

Key Takeaways Explain This Topic AI

Convert mass units systematically: 1 g = 1000 mg = 1 000 000 micrograms; never skip a step under exam pressure.

mg/kg doses use current body weight in kilograms: dose (mg) = dose (mg/kg) × weight (kg); check maximum adult or monograph caps.

Paediatric liquid volumes come from concentration: volume (mL) = required dose (mg) ÷ (mg per mL), or scale from the labelled mg per 5 mL.

Day supply = quantity supplied ÷ doses per day from the directions; incomplete final days do not create extra full days of supply.

APC calculation items are often fill-in-the-blank: enter the exact numeric value in SI units with the decimal places the stem implies—do not invent units inside the blank.

Last updated: August 2026

15.1 Dosage Calculations

Quick Answer: Dosage calculations convert a prescribed amount into a safe, measurable quantity for supply or administration. Master mass unit conversions (g ↔ mg ↔ micrograms), mg/kg body-weight dosing, liquid volume from concentration, day supply from directions, and basic infusion rates . On the APC Intern Written Examination, many calculation items are fill-in-the-blank (FIB) —you type a number, not pick a letter—so accuracy, SI units , and decimal discipline matter as much as knowing the formula.

Pharmaceutical calculations sit under Standard 3.4 (compound medicines) but appear whenever you check a prescription, prepare a dose, or counsel on how long a pack will last. Errors of a factor of ten (especially mg ↔ micrograms) are classic exam and practice traps.

Fill-in-the-blank exam technique (APC)

Unlike four-option MCQs, FIB calculation stems require a numeric entry . Practise as if every worked example below were blank:

Read the unit demanded in the stem (mg, mL, days, mg/h). Enter only the number the system expects—do not type “mg” unless instructed.

Respect decimal places. If the arithmetic yields a whole number (for example 270 mg), enter 270 not 270.0 unless the stem specifies format. If it yields 2.5 mL, enter 2.5 (leading zero before a decimal is good professional habit when writing; follow on-screen format rules in the centre).

Use SI consistently. Australian pharmacy uses milligrams, micrograms, millilitres, kilograms . Convert imperial or mixed units before calculating.

Show yourself the chain on scrap paper: write every conversion step so a missed ×1000 is visible.

Sanity-check magnitude. A paediatric amoxicillin dose of 27 000 mg is almost certainly a unit error; an adult tablet day-supply of 400 days for a 28-tablet pack is wrong.

Do not round mid-chain unless the stem or monographic practice requires it; round only the final answer to a clinically sensible precision (often nearest whole mg for solid doses, one decimal place for small liquid volumes when that is exact).

This study guide uses multiple-choice quizzes for self-check, but every worked example is written so you can cover the final number and re-derive it as if FIB.

Mass unit conversions (g ↔ mg ↔ micrograms)

Memorise and apply in one-thousand steps :

  • From → To Multiply by Divide by
  • g → mg 1000 —
  • mg → micrograms 1000 —
  • g → micrograms 1 000 000 —
  • mg → g — 1000
  • micrograms → mg — 1000
  • Worked example A — conversion chain

A label states 0.25 g . Express as mg and micrograms.

  • 0.25 g × 1000 = 250 mg
  • 250 mg × 1000 = 250 000 micrograms
  • Worked example B — microgram trap

Levothyroxine 100 micrograms is 0.1 mg , not 100 mg. Converting the wrong way multiplies risk of severe toxicity. Always write the unit beside each number on scrap paper.

  • Common unit traps
  • Confusing micrograms with mg (factor of 1000)
  • Reading 0.5 g as 0.5 mg
  • Treating % or ratio strengths as mass doses without converting to mg first (see Section 16.2)
  • Paediatric mg/kg applied to weight in grams instead of kilograms

Body-weight dosing (mg/kg) Dose (mg) = Dose (mg/kg) × Weight (kg) \text{Dose (mg)} = \text{Dose (mg/kg)} \times \text{Weight (kg)} Dose (mg) = Dose (mg/kg) × Weight (kg)

If the regimen is mg/kg/day divided into several doses, calculate the daily total first , then divide by the number of doses—unless the stem already states mg/kg per dose .

Worked example C — single mg/kg dose

Child weight 18 kg . Amoxicillin 15 mg/kg/dose .

Dose = 15 × 18 = 270 mg per dose

FIB entry: 270 (if asked in mg).

Worked example D — daily total then divided

Weight 20 kg . Dose 40 mg/kg/day in two divided doses.

  • Daily total = 40 × 20 = 800 mg/day
  • Per dose = 800 ÷ 2 = 400 mg

Always check whether a maximum dose applies (for example adult ceiling or monograph max mg/day). Weight-based arithmetic never overrides a stated maximum.

Body surface area (BSA) — high-level awareness

Some oncology and specialist paediatric regimens use mg/m² based on BSA rather than mg/kg. Intern Written level expects awareness : BSA dosing is specialised, requires a validated BSA value, and is not something you invent from height/weight without a reference method. If a stem gives BSA already (for example 1.2 m²) and a dose in mg/m², multiply:

Dose = mg/m² × BSA (m²)

Example: 50 mg/m² × 1.2 m² = 60 mg . Do not confuse m² with kg.

Paediatric and adult liquid volumes from concentration

Labels often state mg per 5 mL (or mg/mL). Convert to a usable ratio: Volume (mL) = Required dose (mg) Concentration (mg/mL) \text{Volume (mL)} = \frac{\text{Required dose (mg)}}{\text{Concentration (mg/mL)}} Volume (mL) = Concentration (mg/mL) Required dose (mg) ​

If labelled 125 mg/5 mL , concentration = 125 ÷ 5 = 25 mg/mL .

Worked example E — volume from mg/5 mL

Suspension 125 mg/5 mL . Required dose 250 mg .

  • Method 1: 250 mg needs twice 125 mg → twice 5 mL = 10 mL
  • Method 2: 25 mg/mL → 250 ÷ 25 = 10 mL
  • Worked example F — smaller dose

Same suspension 125 mg/5 mL . Required dose 62.5 mg .

62.5 is half of 125 → half of 5 mL = 2.5 mL

FIB: 2.5 (mL).

Worked example G — concentration given as mg/mL

Injection 10 mg/mL . Dose 35 mg .

Volume = 35 ÷ 10 = 3.5 mL

Day supply from directions Days’ supply = Quantity of dose units supplied Number of dose units taken per day \text{Days' supply} = \frac{\text{Quantity of dose units supplied}}{\text{Number of dose units taken per day}} Days’ supply = Number of dose units taken per day Quantity of dose units supplied ​

Read directions carefully: BD = 2/day, TDS = 3/day, QID = 4/day, mane = once daily morning, 1–2 QID requires a stated assumption (often maximum or prescribed exact dose).

Worked example H — solid oral

Supply 28 tablets , directions 1 tablet BD .

  • Doses per day = 2 tablets
  • Days = 28 ÷ 2 = 14 days
  • Worked example I — incomplete day

Supply 50 tablets , directions 1 TDS (3/day).

50 ÷ 3 = 16.666… → 16 full days with 2 tablets remaining (not a 17th full day)

Exam stems usually want the integer days the pack lasts at the stated rate , or the exact quotient if they ask how many days until empty—read the wording. If they ask how many days’ full dosing, use the integer full days; if they ask duration until quantity is exhausted, 50/3 may be expressed as a mixed number—APC FIB items typically seek a clear numeric convention stated in the stem.

Worked example J — liquid day supply

Bottle 100 mL , dose 5 mL TDS .

Daily volume = 5 × 3 = 15 mL/day

Days = 100 ÷ 15 ≈ 6.67 → 6 full days at full TDS (with 10 mL left), or 6.7 days if the stem wants one decimal—follow the question.

Continuous infusion rates (high-level)

When a volume is infused over a stated time: Rate (mL/h) = Total volume (mL) Time (h) \text{Rate (mL/h)} = \frac{\text{Total volume (mL)}}{\text{Time (h)}} Rate (mL/h) = Time (h) Total volume (mL) ​

Worked example K

1000 mL over 8 hours → 1000 ÷ 8 = 125 mL/h .

If dose is in mg/h and concentration is known:

Rate (mL/h) = dose (mg/h) ÷ concentration (mg/mL)

Example: need 4 mg/h , solution 2 mg/mL → 2 mL/h .

Intern level expects clean arithmetic and unit consistency , not advanced ICU pump programming detail.

Putting dosage calculations together

A typical multi-step stem: Child 16 kg; dose 7.5 mg/kg; suspension 50 mg/5 mL; what volume per dose?

  • Dose mg = 7.5 × 16 = 120 mg
  • Concentration = 50/5 = 10 mg/mL
  • Volume = 120 ÷ 10 = 12 mL

FIB answer: 12 (mL).

Always: convert units → calculate dose mass → convert to measurable volume or count → check against max dose and clinical sense. Dosage calculations are Standard 3.4 numeracy applied to safe supply—the same care you use at the bench and the counselling counter.