Study guide

3.1 LAMS Eligibility: Capacity Bands, the Official List and Vehicle Verification

Queensland Motorcycle Knowledge Test Exam

Track your progress as you read

Finished sections get a check mark.

1 Exam Overview & Queensland Licensing Pathway

1.1 Queensland Motorcycle Knowledge Test: Format, Eligibility and Logistics 1.2 Queensland Motorcycle Licensing Pathway: Q-Ride, Q-SAFE and the HPT 1.3 A Source-Based Study Plan and the Numbers That Cause Errors

2 Queensland Motorcycle Learner Rules & Restrictions

2.1 Learner Supervision, Supervisor Qualifications and the Sidecar Exception 2.2 L Plates, Licence Carriage and Learner Operating Conditions 2.3 Zero BAC, Roadside Drug Testing and Impairment Consequences

3 The Learner Approved Motorcycle Scheme (LAMS) & Equipment

3.1 LAMS Eligibility: Capacity Bands, the Official List and Vehicle Verification 3.2 LAMS Exclusions, Allowable Modifications and Proof of Approval 3.3 Passengers, Sidecars, Loads, Animals and Towing

4 Special Motorcycle Road Rules & Offences

4.1 Lane Filtering and Edge Filtering: Two Different Queensland Rules 4.2 Mobile Phones, Licence-Based Restrictions and Rider Distraction 4.3 Demerit Points, Licence Sanctions and Motorcycle Offences

5 Protective Gear & Pre-Ride Bike Preparation

5.1 Approved Motorcycle Helmets: Standards, Fit and Care 5.2 Protective Clothing, Weather Protection and Visibility 5.3 Motorcycle Controls, Pre-Ride Checks and Maintenance

6 Roadcraft, Hazard Perception & Space Management

6.1 Queensland Roadcraft: Look, Slow Down, Move Away and 12–6–3 6.2 Crash-Avoidance Space, Vision and Stopped Buffers 6.3 Lane Positioning: Space, Surface and Sight 6.4 Rain, Night, Wind, Wildlife and Fatigue

7 Motorcycle Dynamics: Cornering, Braking & Surface Hazards

7.1 Riding Curves: Look, Slow Down and Move Away 7.2 Steering: Direct Steering, Countersteering and Look–Push–Go 7.3 Braking: Set Up and Squeeze, Both Brakes and Emergency Stops 7.4 Surface Hazards and Mechanical Problems While Riding

8 Queensland Road Rules, Speed Limits & Intersections

8.1 Speed Limits, School Zones, Shared Zones and Roadworks 8.2 Giving Way at Crossroads, T-Intersections, Signs and Driveways 8.3 Roundabouts: Giving Way, Lanes and Signals 8.4 Traffic Lights, Signs and Road Markings

9 Road Sharing, Overtaking & Crash Procedures

9.1 Pedestrians, Cyclists, Crossings and Shared Zones 9.2 Heavy Vehicles, Merging, Overtaking and Group Riding 9.3 Crash Duties, Emergency First Aid and Returning to Riding

3.1 LAMS Eligibility: Capacity Bands, the Official List and Vehicle Verification

Key Takeaways Explain This Topic AI

Every RE learner, provisional and open rider is restricted to a learner-approved motorcycle.

Almost every production motorcycle up to and including 250 mL is approved, except the models on the official exclusion list.

A 251–660 mL motorcycle is approved only if its exact model appears on the current Queensland LAMS list, subject to any listed identifier note.

An electric motorcycle capable of more than 50 km/h is approved for RE only if listed.

A motorcycle modified other than by an allowable modification is not learner approved; verify the exact vehicle through TMR rather than calculating approval yourself.

Last updated: September 2026

LAMS Eligibility: Capacity Bands, the Official List and Vehicle Verification

The Learner Approved Motorcycle Scheme—LAMS—controls what a class RE holder may ride. It applies to RE learner, provisional and open licences. A class R holder is unrestricted, but an RE holder remains restricted even after supervision ends.

The underlying technical standard

The Motorcycle Riders’ Guide describes a learner-approved production motorcycle as one with an internal-combustion engine no greater than 660 mL and a power-to-weight ratio no greater than 150 kW per tonne , or a qualifying electric motor. Those figures explain the scheme, but a rider should not try to certify a motorcycle by doing a private calculation. Queensland publishes operational rules and a live model list, and individual variants may depend on an engine or VIN character.

Motorcycles up to and including 250 mL

An RE holder may ride almost any production motorcycle up to and including 250 mL , including a moped, unless it is one of the five models expressly excluded for excessive power-to-weight performance:

  • Suzuki RGV250;
  • Kawasaki KR250, including KR-1 and KR1s;
  • Honda NSR250;
  • Yamaha TZR250; and

Aprilia RS250.

“Almost any” is important. Capacity alone does not override the exclusion list, the production-model requirement or the no-disallowed-modification rule.

Motorcycles from 251 mL to 660 mL

A motorcycle above 250 mL and up to 660 mL is learner approved only when the exact make and model is on the current Queensland list . Read any note attached to the entry. Some entries identify a required engine-number or VIN character, a particular year range, a restricted variant or a manufacturer’s certification letter. A similar marketing name is not enough.

The current page notes a separate treatment for certain motorcycles manufactured before 1960, but a modern learner choosing a bike should use the current list or the registration check rather than assume that all motorcycles below 660 mL qualify.

Electric motorcycles and mopeds

An RE holder may ride an electric motorcycle capable of exceeding 50 km/h only if it appears on the official list. A moped is defined separately and may be authorised by a class C or RE licence subject to the moped rules. Do not invent an approval calculation based on advertised peak power or continuous power: the list is the reliable operational check.

Production condition and modifications

Only production models are learner approved. An individually constructed motorcycle, or a conditionally registered motorcycle lacking the relevant Australian Design Rules certification, is not approved merely because its engine is small. A motorcycle is also not learner approved if it has been modified other than by an allowable modification .

This matters for factory-restricted models. A model may appear on the list only in a specified LAMS configuration. Derestricting it, fitting performance parts outside the allowable rules or swapping the engine can change the legal status. Cosmetic appearance cannot prove compliance, and a seller’s advertisement using “LAMS” is not official evidence.

How to verify the exact vehicle

Use a layered check before buying or riding:

Search the current Queensland learner-approved motorcycles page for the exact make and model.

Read the entry’s notes and compare the exact model year, VIN and engine identifiers.

Use Queensland’s registration-status check where it identifies learner approval.

If the answer remains uncertain, take the Queensland registration number to a transport and motoring customer service centre. TMR states that this individual-vehicle check is available for motorcycles registered in Queensland.

Confirm that the machine remains in an approved production condition and that any modification is allowable.

Keep evidence of the check with purchase records, but remember that responsibility remains with the RE rider.

Exam method

If a question says “249 mL production motorcycle,” check the exclusion list and modifications. If it says “500 mL,” require the model to appear on the list. If it says “electric and faster than 50 km/h,” require a list entry. If it says “derestricted” or “modified for more performance,” do not treat the old approval as continuing automatically.

The scheme is not a challenge to compute a favourable ratio. It is a vehicle-identity rule: capacity band, current official list, exact variant and approved condition must all align.

The pre-1960 exception

Motorcycles produced before 1960 are not included in the model table. TMR states that these older motorcycles are learner approved if they do not exceed 660 mL . This age-based exception does not extend to a modern unlisted 251–660 mL motorcycle, which still needs an exact match on the current list.