Study guide
7.2 Steering: Direct Steering, Countersteering and Look–Push–Go
Queensland Motorcycle Knowledge Test Exam
Track your progress as you read
Finished sections get a check mark.
1 Exam Overview & Queensland Licensing Pathway
1.1 Queensland Motorcycle Knowledge Test: Format, Eligibility and Logistics 1.2 Queensland Motorcycle Licensing Pathway: Q-Ride, Q-SAFE and the HPT 1.3 A Source-Based Study Plan and the Numbers That Cause Errors
2 Queensland Motorcycle Learner Rules & Restrictions
2.1 Learner Supervision, Supervisor Qualifications and the Sidecar Exception 2.2 L Plates, Licence Carriage and Learner Operating Conditions 2.3 Zero BAC, Roadside Drug Testing and Impairment Consequences
3 The Learner Approved Motorcycle Scheme (LAMS) & Equipment
3.1 LAMS Eligibility: Capacity Bands, the Official List and Vehicle Verification 3.2 LAMS Exclusions, Allowable Modifications and Proof of Approval 3.3 Passengers, Sidecars, Loads, Animals and Towing
4 Special Motorcycle Road Rules & Offences
4.1 Lane Filtering and Edge Filtering: Two Different Queensland Rules 4.2 Mobile Phones, Licence-Based Restrictions and Rider Distraction 4.3 Demerit Points, Licence Sanctions and Motorcycle Offences
5 Protective Gear & Pre-Ride Bike Preparation
5.1 Approved Motorcycle Helmets: Standards, Fit and Care 5.2 Protective Clothing, Weather Protection and Visibility 5.3 Motorcycle Controls, Pre-Ride Checks and Maintenance
6 Roadcraft, Hazard Perception & Space Management
6.1 Queensland Roadcraft: Look, Slow Down, Move Away and 12–6–3 6.2 Crash-Avoidance Space, Vision and Stopped Buffers 6.3 Lane Positioning: Space, Surface and Sight 6.4 Rain, Night, Wind, Wildlife and Fatigue
7 Motorcycle Dynamics: Cornering, Braking & Surface Hazards
7.1 Riding Curves: Look, Slow Down and Move Away 7.2 Steering: Direct Steering, Countersteering and Look–Push–Go 7.3 Braking: Set Up and Squeeze, Both Brakes and Emergency Stops 7.4 Surface Hazards and Mechanical Problems While Riding
8 Queensland Road Rules, Speed Limits & Intersections
8.1 Speed Limits, School Zones, Shared Zones and Roadworks 8.2 Giving Way at Crossroads, T-Intersections, Signs and Driveways 8.3 Roundabouts: Giving Way, Lanes and Signals 8.4 Traffic Lights, Signs and Road Markings
9 Road Sharing, Overtaking & Crash Procedures
9.1 Pedestrians, Cyclists, Crossings and Shared Zones 9.2 Heavy Vehicles, Merging, Overtaking and Group Riding 9.3 Crash Duties, Emergency First Aid and Returning to Riding
7.2 Steering: Direct Steering, Countersteering and Look–Push–Go
Key Takeaways Explain This Topic AI
Direct steering is used for very-low-speed turns; countersteering is used for ordinary changes of direction.
The official steering sequence is Look in the direction of travel, Push the handlebar in that direction, and Go in that direction.
Forward pressure on the right handlebar initiates a right lean; pressure on the left initiates a left lean.
Look through the desired path and avoid staring at a hazard or road edge.
If emergency braking in a curve is required and room exists, reduce lean before applying maximum braking.
Last updated: September 2026
Steering: Direct Steering, Countersteering and Look–Push–Go
A motorcycle is single-track and must lean to turn at normal road speeds. Queensland’s guide distinguishes direct steering at very low speed from countersteering for ordinary direction changes and summarises the practical action as Look–Push–Go .
Direct steering at very low speed
At very low speeds, such as a tight U-turn or some intersection manoeuvres, the front wheel is turned in the intended direction. Balance is helped by smooth clutch friction-point control, steady low throttle, gentle rear brake and a head turned toward the exit. The upper body may remain more upright while the motorcycle leans underneath.
Avoid fixing an exact universal changeover speed such as 15 or 20 km/h. Motorcycle geometry, speed and manoeuvre vary. The official distinction is functional: direct steering for very-low-speed turns; countersteering for changes of direction at road speeds.
Countersteering
To initiate a right turn, apply slight forward pressure to the right handlebar. To initiate a left turn, press the left handlebar. That brief input causes the motorcycle to lean and turn in the intended direction. Countersteering is also used to adjust the line through a curve or steer around an object.
The word can seem backward because the front wheel initially points very slightly opposite the final path. The rider does not need to calculate gyroscopic force. The useful action is smooth pressure on the grip on the side of the intended turn.
Look–Push–Go
The guide’s key sequence is:
Look —look in the direction of travel.
Push —push the handlebar in the direction of travel.
Go —move in the direction of travel.
Look well through the turn and point the chin where the motorcycle should go. Peripheral vision continues to monitor the road edge and hazards. Staring at a pothole, guardrail or oncoming vehicle can draw attention away from the safe gap and delay the correct steering input—often called target fixation.
Posture and body weight
Keep the head up, arms relaxed and slightly bent, back relaxed, knees connected to the motorcycle and feet correctly on the rests. Locked arms transmit bumps and make fine steering difficult. At normal cornering speeds, lean with the motorcycle. In a tight, very-low-speed turn, moving the upper body outward can help balance.
Body movement influences the machine but does not replace handlebar steering. A rider who tries to turn only by leaning the torso may react too slowly when a rapid path change is needed.
Adjusting a line
If the motorcycle is running wide but grip and clearance remain, look farther through the correct path and apply additional smooth pressure to the inside handlebar. Avoid an abrupt throttle closure, grab at the brake or a sudden body movement.
If an obstacle appears, choose whether to steer around it or brake based on space, surface and traffic. Do not combine maximum braking with maximum lean. When strong braking is required and room permits, reduce steering pressure and bring the motorcycle more upright before progressively applying both brakes.
Swerving and returning
An emergency swerve consists of a decisive but smooth countersteering input away from the hazard followed by the opposite input to return to the original direction. Look toward the clear path. Complete heavy braking before the swerve where possible; separating maximum braking from the steering change preserves tyre grip.
Practise these skills only in a controlled training environment. A public road is not the place to discover the amount of pressure a particular motorcycle needs.
Slow manoeuvres
For moving off, use the guide’s sequence: ready position, establish friction point and fast idle, then check mirrors and blind spot before releasing the motorcycle smoothly. During a U-turn, keep eyes on the exit and use direct steering. If balance begins to fail, look where escape space remains rather than at the kerb.
Exam distinctions
Tight walking-speed turn: direct steering and balance controls.
Road-speed turn or line adjustment: countersteering.
Directional instruction: Look–Push–Go.
Running wide: look through the safe path and apply smooth inside-grip pressure.
Need maximum braking in a curve: reduce lean first if space permits.
The skill is deliberate visual direction followed by smooth handlebar input, not an unsupported speed threshold or a physics calculation.