Study guide

8.4 Traffic Lights, Signs and Road Markings

Queensland Motorcycle Knowledge Test Exam

Track your progress as you read

Finished sections get a check mark.

1 Exam Overview & Queensland Licensing Pathway

1.1 Queensland Motorcycle Knowledge Test: Format, Eligibility and Logistics 1.2 Queensland Motorcycle Licensing Pathway: Q-Ride, Q-SAFE and the HPT 1.3 A Source-Based Study Plan and the Numbers That Cause Errors

2 Queensland Motorcycle Learner Rules & Restrictions

2.1 Learner Supervision, Supervisor Qualifications and the Sidecar Exception 2.2 L Plates, Licence Carriage and Learner Operating Conditions 2.3 Zero BAC, Roadside Drug Testing and Impairment Consequences

3 The Learner Approved Motorcycle Scheme (LAMS) & Equipment

3.1 LAMS Eligibility: Capacity Bands, the Official List and Vehicle Verification 3.2 LAMS Exclusions, Allowable Modifications and Proof of Approval 3.3 Passengers, Sidecars, Loads, Animals and Towing

4 Special Motorcycle Road Rules & Offences

4.1 Lane Filtering and Edge Filtering: Two Different Queensland Rules 4.2 Mobile Phones, Licence-Based Restrictions and Rider Distraction 4.3 Demerit Points, Licence Sanctions and Motorcycle Offences

5 Protective Gear & Pre-Ride Bike Preparation

5.1 Approved Motorcycle Helmets: Standards, Fit and Care 5.2 Protective Clothing, Weather Protection and Visibility 5.3 Motorcycle Controls, Pre-Ride Checks and Maintenance

6 Roadcraft, Hazard Perception & Space Management

6.1 Queensland Roadcraft: Look, Slow Down, Move Away and 12–6–3 6.2 Crash-Avoidance Space, Vision and Stopped Buffers 6.3 Lane Positioning: Space, Surface and Sight 6.4 Rain, Night, Wind, Wildlife and Fatigue

7 Motorcycle Dynamics: Cornering, Braking & Surface Hazards

7.1 Riding Curves: Look, Slow Down and Move Away 7.2 Steering: Direct Steering, Countersteering and Look–Push–Go 7.3 Braking: Set Up and Squeeze, Both Brakes and Emergency Stops 7.4 Surface Hazards and Mechanical Problems While Riding

8 Queensland Road Rules, Speed Limits & Intersections

8.1 Speed Limits, School Zones, Shared Zones and Roadworks 8.2 Giving Way at Crossroads, T-Intersections, Signs and Driveways 8.3 Roundabouts: Giving Way, Lanes and Signals 8.4 Traffic Lights, Signs and Road Markings

9 Road Sharing, Overtaking & Crash Procedures

9.1 Pedestrians, Cyclists, Crossings and Shared Zones 9.2 Heavy Vehicles, Merging, Overtaking and Group Riding 9.3 Crash Duties, Emergency First Aid and Returning to Riding

8.4 Traffic Lights, Signs and Road Markings

Key Takeaways Explain This Topic AI

Stop at red; stop at yellow if it is safe; proceed on green only when the intersection and road beyond are clear.

A red arrow prohibits the indicated movement even if another circular light is green.

A U-turn at traffic lights or designated crossings requires a U-turn permitted sign and still requires giving way to everyone.

A single continuous centre line may be crossed to enter or leave a road or property and to pass a cyclist safely; double continuous centre lines may be crossed only for the cyclist-passing exception.

Wet paint and metal are surface hazards: reduce speed beforehand and cross smoothly with minimal lean.

Last updated: September 2026

Traffic Lights, Signs and Road Markings

Traffic controls apply to motorcycles in the same way as other vehicles, with specific access to bicycle storage areas at red lights. The safe rider reads the legal instruction and the surface beneath it.

  • Control Required response
  • Red light or red arrow Stop; do not pass the applicable stop line in that direction
  • Yellow light or arrow Stop if it is safe to do so
  • Green light or arrow Proceed only if the intersection and road beyond are clear
  • Flashing yellow Proceed cautiously and apply the relevant give-way rules
  • Illuminated red lane cross Do not travel in that lane
  • Traffic lights and arrows

At a red light , stop before the stop line and do not pass it. Where a bicycle storage area has two stop lines, motorcycles and bicycles may enter the storage area and must stop at the second line; other motor vehicles stop at the first.

At a yellow light , stop if it is safe. Yellow begins the red phase; it is not an invitation to accelerate. If the light changes when the motorcycle is so close that stopping safely is not possible, continue with care. A rider already lawfully in the intersection waiting to turn right must clear it when oncoming traffic stops, even if the signals change.

A green light or arrow permits movement only when the intersection and road beyond are clear. When turning, give way to pedestrians, bicycle riders and personal mobility-device riders crossing the road being entered. A green signal is not an absolute priority.

A red arrow prohibits travel in the arrow’s direction even when the circular signal is green. A flashing yellow light or arrow calls for caution and application of the relevant give-way rules.

U-turns

At traffic lights, children’s crossings, level crossings, marked foot crossings and pedestrian crossings, a U-turn is permitted only when a U-turn permitted sign is displayed. At an otherwise lawful location, the rider still needs a clear view, must avoid obstructing traffic and must give way to all vehicles and pedestrians—even vehicles facing stop or give-way controls.

A U-turn is prohibited across a single or double continuous centre line, a continuous line on the rider’s side of a broken line, or a painted island, unless a specific road-rule exception applies to a different manoeuvre such as passing a cyclist; that cyclist exception does not authorise a U-turn.

Sign families

Regulatory signs state legal duties and prohibitions: stop, give way, speed, no entry, lane use and turn controls. Their shapes and colours help recognition.

Warning signs , commonly yellow diamonds, alert riders to curves, intersections, crossings, animals and surface hazards. An advisory-speed plate is not a new statutory limit, but it is a strong indication of the speed at which the feature can be negotiated in favourable conditions. A motorcycle may require less because of rain, gravel or sight.

Guide and information signs assist with routes, destinations and services. They do not cancel a nearby regulatory control.

Centre lines

A broken centre line may be crossed when safe and lawful. A single continuous centre line may be crossed to enter or leave a road or property and to pass a bicycle or personal mobility-device rider safely, but not for an ordinary overtake or U-turn.

Double continuous centre lines must not be crossed except for the safe bicycle or personal-mobility-device passing exception. Contrary to a common claim, the general driveway exception that applies to a single continuous centre line does not apply across double continuous centre lines.

When passing a cyclist under the exception, the rider must still have a clear road, maintain the statutory distance and give sufficient indication if changing road position.

Lane and edge lines

A continuous line between same-direction lanes generally must not be crossed, subject to the special-purpose-lane exception where the rider is permitted to use that lane. A continuous edge line marks the shoulder, not an ordinary travel lane. The motorcycle edge-filtering rule creates a narrow permission for eligible open riders on qualifying roads; it does not turn every shoulder into a lane.

Obey lane arrows. Stop and give-way lines define the stopping or yielding place. Do not stop over a crossing or enter an intersection that is blocked beyond.

Paint and traction

Road paint, raised markers, metal covers and steel plates can have less grip when wet. Scan ahead, reduce speed before contact, keep the motorcycle as upright as practicable and use smooth throttle, steering and braking. Avoid fabricated friction values; the correct response depends on the condition.

If a motorcycle does not trigger a traffic signal, remain behind the stop line and wait for lawful operation or assistance. Do not proceed through a red merely because a sensor appears not to detect the bike.