Study guide
12.1 Licensing, Identification and Incident Risks
Tasmania Heavy Vehicle Knowledge Test — Free Study Guide 2026 Exam
Track your progress as you read
Finished sections get a check mark.
1 1. Licence Classes and the Knowledge Test
1.1 Choosing LR, MR, HR, HC or MC 1.2 Eligibility and Assessment Pathways 1.3 Learner, Provisional and Gearbox Conditions 1.4 Test Administration and Licence Recognition
2 2. Fitness, Alcohol, Drugs and Fatigue
2.1 Medical Fitness, Seatbelts and Safe Cab Access 2.2 Alcohol Rules and Breath Testing 2.3 Drugs, Medicines and Driving 2.4 Recognising and Managing Fatigue
3 3. Work, Rest and Transport Responsibilities
3.1 Standard Hours and Approved Alternative Hours 3.2 Work Diaries, Records and Chain of Responsibility
4 4. Observation, Space and Vehicle Control
4.1 Observation, Road Position and Hazard Planning 4.2 Following Gaps, Separation and Stopping Distance 4.3 Brake Failure, Skids and Combination Stability 4.4 Hills, Curves, Weather and Animals
5 5. Heavy Vehicle Signs and Manoeuvres
5.1 Clearance, Load, Entry and Route Restrictions 5.2 Turning, Lane Position and Turning Signs 5.3 Speed Caps, Overtaking, Lane Changes and Reversing 5.4 Bus Rules and Heavy or Long Vehicle Parking
6 6. Breakdowns, Warning Triangles and Fire
6.1 Breakdown Safety and Warning Triangles 6.2 Vehicle Fire and Emergency Assistance
7 7. General Tasmanian Traffic Rules
7.1 Signs, Signals and Intersection Priority 7.2 Roundabouts, Merging and Road Markings 7.3 Railway and Pedestrian Crossings 7.4 Speed Zones, School Buses, Cyclists and Emergency Vehicles 7.5 Parking, Distraction, Restraints and Crash Duties
8 8. Roadworthiness, Brakes and Transmission
8.1 Pre-departure Checks and Maintenance Reports 8.2 Wheels, Tyres, Lights and Rear Marking Plates 8.3 Air Brake Architecture, Parking Brakes and ABS 8.4 Handbook Brake Tests and Fault Decisions 8.5 Gearboxes, Double-declutching and Auxiliary Brakes
9 9. Coupling and Uncoupling
9.1 Prime Mover and Semi-trailer Procedures 9.2 Truck-and-trailer Connections and Final Checks
10 10. Dimensions, Mass and Load Distribution
10.1 Dimensions, Rear Overhang and Projecting Loads 10.2 Ratings, Current Axle Limits and Distribution
11 11. Restraint Principles and Equipment
11.1 Performance Standards and Restraint Methods 11.2 Blocking, Dunnage, Containers, Pipes and Lashings
12 12. Dangerous Goods
12.1 Licensing, Identification and Incident Risks
13 13. Oversize Access and Permits
13.1 Notice Eligibility, Permits and Route Conditions
14 14. Traffic Offences and Licence Consequences
14.1 Demerit Points, Speeding and Other Offences
15 15. Inspections, Defects, Noise and Smoke
15.1 Checking Stations and Return to Roadworthy Use
12.1 Licensing, Identification and Incident Risks
Key Takeaways Explain This Topic AI
A dangerous goods driver licence is separate from the heavy vehicle licence; WorkSafe Tasmania administers it.
The general licensing trigger includes a receptacle capacity above 500 litres or kilograms, with specific IBC and explosive-load rules.
Use the Australian Dangerous Goods Code for identification, compatibility, documentation and emergency information; keep people clear of leaks or fire and call 000.
Last updated: October 2026
Recognise the additional transport duty
Dangerous goods can harm people, property or the environment through fire, explosion, toxicity, corrosion, pressure or other hazards. A valid HR, HC or MC licence establishes the vehicle class entitlement, not permission to transport every dangerous load. The goods, receptacles, quantities and operation can trigger separate driver and vehicle licensing and technical requirements.
Tasmania’s dangerous-goods road and rail regulations apply with the Australian Dangerous Goods Code (ADG Code) . WorkSafe Tasmania is the relevant licensing authority. The National Transport Commission publishes the Code. Use its current provisions and the local regulations rather than infer requirements from an ordinary freight label or another state’s simplified chart.
Driver licence thresholds
Service Tasmania states that a dangerous goods driver licence is required for the specified capacities, including a container above 500 litres or kilograms , certain Intermediate Bulk Container (IBC) capacities above 3,000 litres , and a Risk Category 3 Class 1 explosive load. The IBC arrangements depend on the conditions, including whether the IBCs are filled or emptied on the vehicle. Check the complete rule rather than apply 500 to every IBC regardless of the exception.
Capacity is not always the quantity currently carried. A large receptacle partly filled does not necessarily fall outside licensing because today’s contents are small. A set of smaller packages can also trigger placarding or other transport duties without matching the driver-licence receptacle trigger. Driver licensing, vehicle licensing, placarding and documentation are separate questions.
A dangerous goods driver licence is normally valid for five years. Applications require the appropriate driving entitlement, approved training and medical evidence, and suitability checks. Service Tasmania currently requires relevant training and medical evidence within the preceding six months and details of the driving record. Confirm the current application requirements before undertaking the duty; a theory pass for HC does not replace them.
Identify what is carried
- Hazard class Broad hazard description
- 1 Explosives
- 2 Gases, including differing flammable, non-flammable and toxic divisions
- 3 Flammable liquids
- 4 Flammable solids and related spontaneous-combustion or water-reactive hazards
- 5 Oxidising substances and organic peroxides
- 6 Toxic and infectious substances
- 7 Radioactive material
- 8 Corrosive substances
- 9 Miscellaneous dangerous substances and articles
The class number describes a hazard grouping. A UN number identifies a substance or article entry; a proper shipping name, subsidiary risk and packing group can also matter. An emergency information panel and Hazchem information serve additional response purposes. Do not treat these different identifiers as interchangeable or guess safe handling from a class number alone.
Packaging, segregation and loading
Use compliant packages and receptacles in suitable condition. Check closures, leaks, labels and any required approvals or test status. Restrain the load so normal braking and cornering do not damage packages or fittings. Ordinary load restraint requirements still apply, together with the dangerous-goods rules.
Incompatible goods can react if mixed. Segregation requirements depend on the substances and Code, not simply whether the packages fit side by side. Do not load unknown products together on the assumption that sealed packages never fail. Keep required emergency information and transport documents available in the prescribed arrangement so responders can identify the load without searching an unsafe cargo area.
Plan the route and stops, including any dangerous-goods restrictions. Check required safety equipment and know the emergency procedure. Zero alcohol applies to the relevant dangerous-goods vehicle category independently of ordinary car limits. Fitness, fatigue and vehicle-condition duties continue alongside the specialist requirements.
A capacity example
A driver is asked to move a partly filled tank whose capacity exceeds 500 litres. The small amount currently inside is not enough to conclude that no dangerous-goods driver licence is needed. Identify the substance, receptacle and capacity, then check the regulation and any applicable exception. Likewise, a 1,000-litre IBC not filled or emptied on the vehicle requires examination of the specific IBC rule rather than a blanket conclusion from the 500-litre general figure.
Leak, crash or fire
Stop safely if a leak or other serious hazard develops. Keep people away, avoid ignition sources where safe and call 000 when there is an emergency. Tell responders the location, vehicle, known goods and any visible placard information from a safe position. Do not approach a vapour cloud or leaking package merely to obtain a better photograph of the label.
Do not touch, mix or wash an unknown substance into drains. Do not enter an unsafe area for a rescue or cleanup without the required training and equipment. The correct response depends on the goods, wind, site and hazard; there is no universal safe distance or extinguishing agent for every load. Protect people and follow the emergency instructions and responders' directions.
Key decisions
Check the specialist licensing and technical duties separately from the vehicle class. Identify the load accurately, preserve documentation and avoid improvised handling of a dangerous incident.
Official sources
Service Tasmania dangerous goods driver licensing ; Tasmanian dangerous goods regulations ; Australian Dangerous Goods Code . Sources checked 10 October 2026.