Study guide

3.2 Work Diaries, Records and Chain of Responsibility

Tasmania Heavy Vehicle Knowledge Test — Free Study Guide 2026 Exam

Track your progress as you read

Finished sections get a check mark.

1 1. Licence Classes and the Knowledge Test

1.1 Choosing LR, MR, HR, HC or MC 1.2 Eligibility and Assessment Pathways 1.3 Learner, Provisional and Gearbox Conditions 1.4 Test Administration and Licence Recognition

2 2. Fitness, Alcohol, Drugs and Fatigue

2.1 Medical Fitness, Seatbelts and Safe Cab Access 2.2 Alcohol Rules and Breath Testing 2.3 Drugs, Medicines and Driving 2.4 Recognising and Managing Fatigue

3 3. Work, Rest and Transport Responsibilities

3.1 Standard Hours and Approved Alternative Hours 3.2 Work Diaries, Records and Chain of Responsibility

4 4. Observation, Space and Vehicle Control

4.1 Observation, Road Position and Hazard Planning 4.2 Following Gaps, Separation and Stopping Distance 4.3 Brake Failure, Skids and Combination Stability 4.4 Hills, Curves, Weather and Animals

5 5. Heavy Vehicle Signs and Manoeuvres

5.1 Clearance, Load, Entry and Route Restrictions 5.2 Turning, Lane Position and Turning Signs 5.3 Speed Caps, Overtaking, Lane Changes and Reversing 5.4 Bus Rules and Heavy or Long Vehicle Parking

6 6. Breakdowns, Warning Triangles and Fire

6.1 Breakdown Safety and Warning Triangles 6.2 Vehicle Fire and Emergency Assistance

7 7. General Tasmanian Traffic Rules

7.1 Signs, Signals and Intersection Priority 7.2 Roundabouts, Merging and Road Markings 7.3 Railway and Pedestrian Crossings 7.4 Speed Zones, School Buses, Cyclists and Emergency Vehicles 7.5 Parking, Distraction, Restraints and Crash Duties

8 8. Roadworthiness, Brakes and Transmission

8.1 Pre-departure Checks and Maintenance Reports 8.2 Wheels, Tyres, Lights and Rear Marking Plates 8.3 Air Brake Architecture, Parking Brakes and ABS 8.4 Handbook Brake Tests and Fault Decisions 8.5 Gearboxes, Double-declutching and Auxiliary Brakes

9 9. Coupling and Uncoupling

9.1 Prime Mover and Semi-trailer Procedures 9.2 Truck-and-trailer Connections and Final Checks

10 10. Dimensions, Mass and Load Distribution

10.1 Dimensions, Rear Overhang and Projecting Loads 10.2 Ratings, Current Axle Limits and Distribution

11 11. Restraint Principles and Equipment

11.1 Performance Standards and Restraint Methods 11.2 Blocking, Dunnage, Containers, Pipes and Lashings

12 12. Dangerous Goods

12.1 Licensing, Identification and Incident Risks

13 13. Oversize Access and Permits

13.1 Notice Eligibility, Permits and Route Conditions

14 14. Traffic Offences and Licence Consequences

14.1 Demerit Points, Speeding and Other Offences

15 15. Inspections, Defects, Noise and Smoke

15.1 Checking Stations and Return to Roadworthy Use

3.2 Work Diaries, Records and Chain of Responsibility

Key Takeaways Explain This Topic AI

Standard-hours drivers travelling 100 km or more from base generally require a work diary; recent diary-required work and alternative-hours operations also affect the requirement.

Provide diary copies to the record keeper within 21 days; required fatigue records are retained for three years.

Chain of Responsibility depends on the transport roles performed, including operators, schedulers, consignors, consignees, packers, loaders and loading managers.

Last updated: October 2026

Decide whether a diary is required before departure

A National Driver Work Diary records work and rest for fatigue-regulated heavy vehicle driving. Under standard hours, travelling 100 km or more from the driver’s base generally triggers the diary requirement. Relevant diary-required work in the preceding 28 days also affects carriage and recording. Drivers using approved alternative hours, applicable transitional accreditation or some exemptions can require diaries regardless of distance.

The distance is a radius from base , not a total distance accumulated during the day. Several local deliveries totalling 180 km may remain within a 100 km radius. A single delivery crossing that radius may trigger the requirement even if the driver’s elapsed driving time is short. Identify the base correctly and check the furthest point of the route, including diversions.

Local operations still need records

A standard-hours driver operating locally does not obtain an exemption from fatigue limits simply because a written diary is not required. The operator or other record keeper must keep the required local fatigue records. These include the driver, work and rest information and other prescribed details. Special exemptions, such as some primary-production arrangements, have conditions; they are not a general permission for every agricultural delivery to ignore records.

  • Operation Recording decision
  • Standard hours entirely within the local radius Check local record requirements and recent diary-required work

Standard hours reaching 100 km or more from base Carry and use the required diary unless a valid exemption applies

  • Approved alternative hours Follow the approval’s diary and evidence requirements
  • Route changes during the duty Reassess the requirement before travelling outside the planned area
  • Approved Electronic Work Diary Use the approved system; a generic phone app is not automatically an EWD
  • Complete records accurately

Record the date, identity, base and required vehicle and location information, then record work and rest as instructed. Include non-driving work. Use the driver’s base time zone when travelling across zones. Make entries at the required times, not by reconstructing a convenient day at the end of the week. Sign or certify the required information and correct errors through the approved process without concealing the original record.

Written diary pages provide copies for the driver and record keeper. Do not assume a two-sheet arrangement or discard the driver’s record after handing in a copy. Provide the required daily copies to the record keeper within 21 days. Carry the current diary and required recent records, including the preceding 28-day period as applicable. Record keepers retain required records for three years and must make them available for authorised inspection.

A diary does not prove that the schedule was lawful merely because every box has writing in it. The work totals, break lengths, reference periods and actual tasks must also be correct. False entries, missing required information and non-production can create separate compliance problems. An operator should check records promptly enough to correct scheduling practices, rather than wait for a roadside investigation.

Lost, stolen or destroyed diary

NHVR provides a supplementary-record process when a diary is lost, stolen or destroyed. Report it within the required two business days and obtain a replacement. Supplementary records can be used for the specified limited period, normally up to seven business days, while the replacement is arranged. Retain and transfer the required information. Do not invent either an unlimited grace period or a blanket rule that every affected driver must immediately cease all lawful driving despite the approved process.

Chain of Responsibility

Chain of Responsibility (CoR) recognises that heavy vehicle safety is influenced by transport decisions beyond the driver. Relevant roles include employers, prime contractors, operators, schedulers, consignors, consignees, packers, loaders, unloaders and loading managers. The primary duty requires parties to ensure, so far as reasonably practicable, the safety of their transport activities. Executives have their own due-diligence obligations.

A person is a CoR party because of a role they perform. A driver is not automatically a named CoR party solely from driving, but can be one when also performing another role such as operator or loader. The driver still has direct driving obligations. Do not infer that every business in the chain is automatically guilty of every breach; duties, conduct and the statutory requirements must be assessed.

Consider a customer insisting on unloading only after a delay that leaves no lawful return schedule. The scheduler should revise the duty, arrange another driver or provide rest; the customer should avoid practices that encourage unsafe continuation. The driver should report the problem and refuse an unsafe trip. A demand to 'make up time' by speeding or misrecording rest is not a solution.

CoR also covers mass, dimensions, loading, vehicle standards and other safety risks. A consignor’s inaccurate weight declaration can create axle overload. A loader can make a vehicle unstable by placing heavy items high. An operator can create risk by ignoring repeated brake defects. The practical lesson is to communicate accurate information and correct the transport plan before the vehicle moves.

Key decisions

Determine the recording requirement from the operation, maintain accurate work and rest evidence, and address unsafe pressures through the responsible transport roles.

Official sources

NHVR record keeping ; work diary FAQs ; Chain of Responsibility . Sources checked 10 October 2026.

Loading diagram... Recording decision