Study guide
7.2 Roundabouts, Merging and Road Markings
Tasmania Heavy Vehicle Knowledge Test — Free Study Guide 2026 Exam
Track your progress as you read
Finished sections get a check mark.
1 1. Licence Classes and the Knowledge Test
1.1 Choosing LR, MR, HR, HC or MC 1.2 Eligibility and Assessment Pathways 1.3 Learner, Provisional and Gearbox Conditions 1.4 Test Administration and Licence Recognition
2 2. Fitness, Alcohol, Drugs and Fatigue
2.1 Medical Fitness, Seatbelts and Safe Cab Access 2.2 Alcohol Rules and Breath Testing 2.3 Drugs, Medicines and Driving 2.4 Recognising and Managing Fatigue
3 3. Work, Rest and Transport Responsibilities
3.1 Standard Hours and Approved Alternative Hours 3.2 Work Diaries, Records and Chain of Responsibility
4 4. Observation, Space and Vehicle Control
4.1 Observation, Road Position and Hazard Planning 4.2 Following Gaps, Separation and Stopping Distance 4.3 Brake Failure, Skids and Combination Stability 4.4 Hills, Curves, Weather and Animals
5 5. Heavy Vehicle Signs and Manoeuvres
5.1 Clearance, Load, Entry and Route Restrictions 5.2 Turning, Lane Position and Turning Signs 5.3 Speed Caps, Overtaking, Lane Changes and Reversing 5.4 Bus Rules and Heavy or Long Vehicle Parking
6 6. Breakdowns, Warning Triangles and Fire
6.1 Breakdown Safety and Warning Triangles 6.2 Vehicle Fire and Emergency Assistance
7 7. General Tasmanian Traffic Rules
7.1 Signs, Signals and Intersection Priority 7.2 Roundabouts, Merging and Road Markings 7.3 Railway and Pedestrian Crossings 7.4 Speed Zones, School Buses, Cyclists and Emergency Vehicles 7.5 Parking, Distraction, Restraints and Crash Duties
8 8. Roadworthiness, Brakes and Transmission
8.1 Pre-departure Checks and Maintenance Reports 8.2 Wheels, Tyres, Lights and Rear Marking Plates 8.3 Air Brake Architecture, Parking Brakes and ABS 8.4 Handbook Brake Tests and Fault Decisions 8.5 Gearboxes, Double-declutching and Auxiliary Brakes
9 9. Coupling and Uncoupling
9.1 Prime Mover and Semi-trailer Procedures 9.2 Truck-and-trailer Connections and Final Checks
10 10. Dimensions, Mass and Load Distribution
10.1 Dimensions, Rear Overhang and Projecting Loads 10.2 Ratings, Current Axle Limits and Distribution
11 11. Restraint Principles and Equipment
11.1 Performance Standards and Restraint Methods 11.2 Blocking, Dunnage, Containers, Pipes and Lashings
12 12. Dangerous Goods
12.1 Licensing, Identification and Incident Risks
13 13. Oversize Access and Permits
13.1 Notice Eligibility, Permits and Route Conditions
14 14. Traffic Offences and Licence Consequences
14.1 Demerit Points, Speeding and Other Offences
15 15. Inspections, Defects, Noise and Smoke
15.1 Checking Stations and Return to Roadworthy Use
7.2 Roundabouts, Merging and Road Markings
Key Takeaways Explain This Topic AI
Give way to vehicles already in the roundabout; the rule is not simply give way to anything on the right.
When a marked lane ends, give way to traffic in the continuing lane; in an unmarked merge, the vehicle behind gives way to the vehicle ahead.
Keep left on applicable multi-lane roads over 80 km/h or where signed, subject to the road-rule exceptions.
Last updated: October 2026
Read a roundabout as an intersection
Approach a roundabout at a speed allowing you to stop and select a suitable gear before entry. Look at the signs, lane arrows and circulating traffic. Give way to vehicles already in the roundabout . A vehicle approaching from the right but not yet in it does not automatically have priority merely because it is on your right. Still observe all approaches and avoid entering into a developing conflict.
A long vehicle requires room for the trailer’s cut-in and the rear body’s swing. Do not assume a clear cab path proves a clear trailer path. A turning sign and the applicable long-vehicle exceptions can affect positioning, but there is no blanket permission to drive over a kerb or occupy every lane. Choose a route and path appropriate to the actual vehicle.
Approach lanes and signals
For a left turn, generally approach in the left lane and signal left. For a right turn or travelling around to return, generally approach in the right lane and signal right. For going straight ahead, use a permitted lane and do not signal an intended turn on approach unless the movement requires it. Follow lane arrows where they specify a different permitted movement.
Signal left when leaving the roundabout if practicable, including when going straight ahead. Maintain the selected path and check for traffic beside the vehicle. A lane change within the roundabout requires signalling and giving way to vehicles in the destination lane. The fact that the truck entered first does not reserve an adjacent lane.
- Decision Rule or observation
- Entering Give way to vehicles already circulating
- Choosing lane Follow arrows and the permitted path for the intended exit
- Changing lane Signal and give way to traffic in the destination lane
- Leaving Signal left if practicable and check the exit path
- Long vehicle clearance Monitor cut-in and tail swing; use only applicable exceptions
Cyclists can use roundabouts and may take a position that improves their safety and visibility. Do not squeeze past within a narrow circulating lane. Allow enough time and space for them to travel through and watch for riders at exits and crossings. A heavy vehicle’s mirror view can change rapidly through the curve.
Marked lane ending versus an unmarked merge
When a marked lane ends and the driver must cross a lane line into the continuing lane, the driver changing lanes gives way. Do not assume the vehicle furthest ahead always has priority in that layout. A merge arrow warns of the lane change; it does not transfer priority.
When two lines of traffic merge without a marked lane boundary between them, the vehicle behind gives way to the vehicle ahead. This is the context in which the ahead/behind merging rule applies. Identify the road markings before choosing a slogan such as 'zipper merge'. Even with priority, adjust speed smoothly and avoid trapping another vehicle beside a long trailer.
Keep left and use lanes correctly
On a multi-lane road with a speed limit over 80 km/h, or where a KEEP LEFT UNLESS OVERTAKING sign applies, do not remain in the right lane except as the rules permit. Exceptions include the relevant turning, overtaking, obstruction and congestion situations. Lane-specific signs can impose additional restrictions, so check whether a truck lane or restricted lane applies.
On roads without multiple marked lanes, keep as near as practicable to the left while maintaining a safe margin. Do not use a soft shoulder as if it were a normal lane. Avoid driving along an emergency stopping lane or bicycle lane except under the actual permitted exceptions. A delivery deadline does not make a special-purpose lane available.
Dividing and lane lines
A broken dividing line can permit crossing for a lawful safe movement, such as overtaking, when visibility and other rules allow. A continuous dividing line generally restricts crossing. A continuous lane line can restrict changing lanes. Double-line arrangements require attention to the line nearest the vehicle and the actual rule.
There are specific exceptions for activities such as entering or leaving the road, avoiding an obstruction and safely passing a bicycle under the stated conditions. An exception is not permission to cross into unseen oncoming traffic. Confirm that it applies and that the movement is safe. If the safe clearance cannot be provided, wait.
Painted islands, medians and turn lanes also have defined uses. Do not treat a painted area as free space for a long vehicle whenever a corner feels tight. Select the lawful approach early; if you miss the turn, continue to a safe alternative rather than cut across several lanes at the last moment.
A merging example
An HR truck is ahead of a car in a lane that ends at a broken lane line. The truck still must give way when entering the car’s continuing lane. In a different layout with two unmarked streams narrowing to one, an ahead vehicle can have the relevant merge priority. The geometry changes the answer, not the truck’s size.
Key decisions
Identify circulating traffic, approach markings and merge geometry. Plan the entire vehicle path and preserve clearance instead of relying on informal priority assumptions.
Official sources
Road Rules 2019, roundabouts, lane use, merging and line rules ; official Road Rules Handbook . Sources checked 10 October 2026.