Study guide

5.1 Clearance, Load, Entry and Route Restrictions

Tasmania Heavy Vehicle Knowledge Test — Free Study Guide 2026 Exam

Track your progress as you read

Finished sections get a check mark.

1 1. Licence Classes and the Knowledge Test

1.1 Choosing LR, MR, HR, HC or MC 1.2 Eligibility and Assessment Pathways 1.3 Learner, Provisional and Gearbox Conditions 1.4 Test Administration and Licence Recognition

2 2. Fitness, Alcohol, Drugs and Fatigue

2.1 Medical Fitness, Seatbelts and Safe Cab Access 2.2 Alcohol Rules and Breath Testing 2.3 Drugs, Medicines and Driving 2.4 Recognising and Managing Fatigue

3 3. Work, Rest and Transport Responsibilities

3.1 Standard Hours and Approved Alternative Hours 3.2 Work Diaries, Records and Chain of Responsibility

4 4. Observation, Space and Vehicle Control

4.1 Observation, Road Position and Hazard Planning 4.2 Following Gaps, Separation and Stopping Distance 4.3 Brake Failure, Skids and Combination Stability 4.4 Hills, Curves, Weather and Animals

5 5. Heavy Vehicle Signs and Manoeuvres

5.1 Clearance, Load, Entry and Route Restrictions 5.2 Turning, Lane Position and Turning Signs 5.3 Speed Caps, Overtaking, Lane Changes and Reversing 5.4 Bus Rules and Heavy or Long Vehicle Parking

6 6. Breakdowns, Warning Triangles and Fire

6.1 Breakdown Safety and Warning Triangles 6.2 Vehicle Fire and Emergency Assistance

7 7. General Tasmanian Traffic Rules

7.1 Signs, Signals and Intersection Priority 7.2 Roundabouts, Merging and Road Markings 7.3 Railway and Pedestrian Crossings 7.4 Speed Zones, School Buses, Cyclists and Emergency Vehicles 7.5 Parking, Distraction, Restraints and Crash Duties

8 8. Roadworthiness, Brakes and Transmission

8.1 Pre-departure Checks and Maintenance Reports 8.2 Wheels, Tyres, Lights and Rear Marking Plates 8.3 Air Brake Architecture, Parking Brakes and ABS 8.4 Handbook Brake Tests and Fault Decisions 8.5 Gearboxes, Double-declutching and Auxiliary Brakes

9 9. Coupling and Uncoupling

9.1 Prime Mover and Semi-trailer Procedures 9.2 Truck-and-trailer Connections and Final Checks

10 10. Dimensions, Mass and Load Distribution

10.1 Dimensions, Rear Overhang and Projecting Loads 10.2 Ratings, Current Axle Limits and Distribution

11 11. Restraint Principles and Equipment

11.1 Performance Standards and Restraint Methods 11.2 Blocking, Dunnage, Containers, Pipes and Lashings

12 12. Dangerous Goods

12.1 Licensing, Identification and Incident Risks

13 13. Oversize Access and Permits

13.1 Notice Eligibility, Permits and Route Conditions

14 14. Traffic Offences and Licence Consequences

14.1 Demerit Points, Speeding and Other Offences

15 15. Inspections, Defects, Noise and Smoke

15.1 Checking Stations and Return to Roadworthy Use

5.1 Clearance, Load, Entry and Route Restrictions

Key Takeaways Explain This Topic AI

Both CLEARANCE and LOW CLEARANCE signs prohibit a vehicle higher than the stated height, including its load.

Gross load signs use actual total mass; a NO TRUCKS mass sign uses GVM of the vehicle or any unit in a combination.

A NO TRUCKS destination exception can apply where no alternative route exists or every alternative passes another such sign; it does not require a separate delivery plate.

Last updated: October 2026

Read what the number measures

Heavy vehicle restriction signs protect structures, road space and local routes. The same number can mean very different things on different signs. A driver should know the loaded height, vehicle and combination length, rated GVM of each unit, actual total mass and relevant axle-group masses before selecting the route. A sign is not an invitation to estimate these quantities from the appearance of the load.

Clearance signs

Both CLEARANCE and LOW CLEARANCE signs are binding under road rule 102. Do not pass if the vehicle or any connected vehicle, including its load, is higher than the stated height. There is no general rule that one type refers only to concrete while the other refers only to wires. Read the posted limit and consider the actual vehicle.

Loaded height includes cargo, raised equipment and other parts that affect the measurement. Know the height in the travel configuration, with equipment secured. Suspension movement, road camber and a sloping approach can affect practical clearance, so a marginal measured fit is not a reason to proceed blindly. Stop before the point where turning back becomes unsafe and arrange a suitable alternative if uncertain.

Actual mass signs

A GROSS LOAD LIMIT or bridge gross-mass sign refers to the actual total mass of the vehicle and any connected vehicles, including their loads. A bridge axle-group sign refers to the actual mass carried by the specified axle group. Being below GVM does not prove compliance with a bridge limit. A combination can be lawful under general mass limits and still be too heavy for a particular bridge.

For a sign showing 20 t gross mass, a combination actually weighing 21 t cannot proceed. A 19 t combination may satisfy that particular gross-mass sign, but still needs compliant axle-group mass, clearance, route access and other conditions. The rule prohibits mass more than the stated figure; do not rewrite it as a universal prohibition at exactly the figure.

NO TRUCKS signs

  • Sign information Measurement used Key distinction
  • Mass shown Vehicle GVM, or GVM of any unit in a combination Rated mass, not today’s weighbridge mass
  • Length shown Vehicle length, or overall combination length Include the relevant full configuration
  • No mass or length shown Truck definition Generally a non-passenger motor vehicle above 4.5 t GVM

The mass and length versions exclude buses from those prohibitions as the rule specifies. A mass sign can apply to a combination where just one vehicle unit exceeds the shown GVM. Emptying that unit does not reduce its rating. Do not substitute the sum of all GVMs where the rule expressly says any vehicle in the combination.

Rule 104 includes a destination exception if the destination lies beyond the sign and there is no other route to reach it, or every other route requires passing another NO TRUCKS sign. The exception is in the rule itself; it does not depend on a supplementary 'local deliveries' plate. It is not a general shortcut entitlement. If a lawful alternative route exists, inconvenience alone does not satisfy the exception.

Mandatory entry and local restrictions

A TRUCKS MUST ENTER sign requires a truck passing it to enter the indicated area. Follow the sign’s information and any lawful officer directions. A similar buses-must-enter sign applies to buses. Do not assume a light load, a familiar vehicle or an apparently closed weighbridge allows you to ignore the displayed requirement.

The handbook also discusses light-traffic roads and local restrictions. Read the actual sign and its mass or access information rather than treating 'light traffic' as a description of the current number of cars. Planning should identify these restrictions before arrival. If a route is unsuitable, find a safe place to stop and obtain a lawful route instead of reversing unexpectedly into traffic.

B-double access

An MC licence authorises the class; it does not authorise every road. B-doubles must comply with the current notice or permit, approved network, vehicle dimensions and operating conditions. Short general-access B-doubles and longer restricted-access combinations have different arrangements. Check the current NHVR notice and Tasmania’s route information for the exact combination rather than applying a memorised 25 m limit to all B-doubles.

For example, a dispatcher supplies a route used last week by a single semi-trailer. Today’s B-double may need a different authorised network. Check the first and last local access legs as well as the main highway. A permitted main route does not necessarily include the customer’s narrow side street.

Key decisions

Match each sign to its measurement, apply only the genuine exceptions and check route authority separately from driver class. Resolve uncertainty before reaching the restricted point.

Official sources

Road Rules 2019, rules 102–107 and dictionary ; NHVR B-double access . Sources checked 10 October 2026.