Study guide

5.3 Speed Caps, Overtaking, Lane Changes and Reversing

Tasmania Heavy Vehicle Knowledge Test — Free Study Guide 2026 Exam

Track your progress as you read

Finished sections get a check mark.

1 1. Licence Classes and the Knowledge Test

1.1 Choosing LR, MR, HR, HC or MC 1.2 Eligibility and Assessment Pathways 1.3 Learner, Provisional and Gearbox Conditions 1.4 Test Administration and Licence Recognition

2 2. Fitness, Alcohol, Drugs and Fatigue

2.1 Medical Fitness, Seatbelts and Safe Cab Access 2.2 Alcohol Rules and Breath Testing 2.3 Drugs, Medicines and Driving 2.4 Recognising and Managing Fatigue

3 3. Work, Rest and Transport Responsibilities

3.1 Standard Hours and Approved Alternative Hours 3.2 Work Diaries, Records and Chain of Responsibility

4 4. Observation, Space and Vehicle Control

4.1 Observation, Road Position and Hazard Planning 4.2 Following Gaps, Separation and Stopping Distance 4.3 Brake Failure, Skids and Combination Stability 4.4 Hills, Curves, Weather and Animals

5 5. Heavy Vehicle Signs and Manoeuvres

5.1 Clearance, Load, Entry and Route Restrictions 5.2 Turning, Lane Position and Turning Signs 5.3 Speed Caps, Overtaking, Lane Changes and Reversing 5.4 Bus Rules and Heavy or Long Vehicle Parking

6 6. Breakdowns, Warning Triangles and Fire

6.1 Breakdown Safety and Warning Triangles 6.2 Vehicle Fire and Emergency Assistance

7 7. General Tasmanian Traffic Rules

7.1 Signs, Signals and Intersection Priority 7.2 Roundabouts, Merging and Road Markings 7.3 Railway and Pedestrian Crossings 7.4 Speed Zones, School Buses, Cyclists and Emergency Vehicles 7.5 Parking, Distraction, Restraints and Crash Duties

8 8. Roadworthiness, Brakes and Transmission

8.1 Pre-departure Checks and Maintenance Reports 8.2 Wheels, Tyres, Lights and Rear Marking Plates 8.3 Air Brake Architecture, Parking Brakes and ABS 8.4 Handbook Brake Tests and Fault Decisions 8.5 Gearboxes, Double-declutching and Auxiliary Brakes

9 9. Coupling and Uncoupling

9.1 Prime Mover and Semi-trailer Procedures 9.2 Truck-and-trailer Connections and Final Checks

10 10. Dimensions, Mass and Load Distribution

10.1 Dimensions, Rear Overhang and Projecting Loads 10.2 Ratings, Current Axle Limits and Distribution

11 11. Restraint Principles and Equipment

11.1 Performance Standards and Restraint Methods 11.2 Blocking, Dunnage, Containers, Pipes and Lashings

12 12. Dangerous Goods

12.1 Licensing, Identification and Incident Risks

13 13. Oversize Access and Permits

13.1 Notice Eligibility, Permits and Route Conditions

14 14. Traffic Offences and Licence Consequences

14.1 Demerit Points, Speeding and Other Offences

15 15. Inspections, Defects, Noise and Smoke

15.1 Checking Stations and Return to Roadworthy Use

5.3 Speed Caps, Overtaking, Lane Changes and Reversing

Key Takeaways Explain This Topic AI

A bus above 5 t GVM or another vehicle above 12 t GVM has a maximum of 100 km/h where the posted limit is higher.

The handbook identifies speed-limiter requirements for buses above 14.5 t and goods vehicles above 15 t built after 1 January 1988, subject to applicable exemptions.

Signal and give way when changing lanes; stop a reversing movement whenever the path or guide is uncertain.

Last updated: October 2026

Use the lowest applicable ceiling

Tasmania’s posted speed applies to both light and heavy vehicles, with vehicle and licence exceptions. If the posted limit exceeds 100 km/h, a bus above 5 t GVM or another vehicle above 12 t GVM is limited to 100 km/h. A heavy vehicle learner is limited to 90 km/h even in a higher zone. Any lower posted limit, access condition or safe speed must also be respected.

A speed limiter is equipment restricting maximum powered road speed. The handbook identifies buses above 14.5 t GVM and heavy goods vehicles, including prime movers, above 15 t GVM built after 1 January 1988 as requiring limitation to 100 km/h. Specific legal exemptions can apply, including certain older primary-production vehicles. Check the actual vehicle category and applicable standards rather than teaching that every truck above 15 t, regardless of age, has identical requirements.

A limiter does not prevent every downhill overspeed: gravity can accelerate a vehicle beyond a powered-speed setting. Monitor speed and use the proper descent plan. Do not tamper with the limiter, and report a malfunction. The road speed cap and the equipment requirement are different obligations.

Decide whether overtaking is worthwhile

A long vehicle needs more distance to pass and return safely. Assess the speed difference, length of both vehicles, available visibility, oncoming traffic, gradients and any lanes or lines prohibiting the manoeuvre. A small speed advantage can require a surprisingly long pass. You cannot exceed the speed limit to complete it faster.

For illustration, a truck travelling at 100 km/h gains on a vehicle at 90 km/h at only 10 km/h, or 2.78 m/s. If an assumed total relative gain of 100 m is needed to move from the initial safe gap to a safe position ahead, that takes about 36 seconds. The truck travels about 1,000 m during that time. The assumed gain is a teaching input, not a prescribed overtaking distance; real safe margins and oncoming traffic can require more.

Before passing During passing Returning to lane

Check legality, visibility and sufficient clear distance Maintain lawful speed and a stable path Ensure full clearance, not just cab clearance

  • Check mirrors and blind spots Watch for changed traffic or road conditions Signal and give way as required
  • Allow for load and gradient Avoid crowding the vehicle being passed Restore a safe following gap

Do not begin before a crest or blind bend where the visible road is too short. Do not overtake a vehicle stopped at a pedestrian crossing. A turning vehicle and its sign can impose additional restrictions. If a pass becomes unsafe, choose a controlled lawful response rather than force an oncoming vehicle onto the shoulder.

Being overtaken

Do not increase speed while another vehicle is overtaking. Maintain a predictable path and provide reasonable space. An impatient driver behind does not make an unsafe shoulder usable. Where a suitable lawful opportunity exists, allowing traffic to pass can reduce pressure, but never move into a soft verge or obstructed shoulder simply to be courteous.

Long-vehicle separation outside built-up areas helps overtaking traffic return between vehicles. Preserve it where the rule applies. If another vehicle returns ahead, ease back to restore the necessary gap rather than close the space deliberately.

Lane changes and merging

When moving from one marked lane to another, signal and give way to vehicles in the destination lane. Check mirrors and blind spots just before moving; an earlier check can become stale. A truck’s indicator does not confer priority. Allow the trailer to complete the lane movement smoothly without cutting across an adjacent vehicle.

Distinguish a marked lane ending from two unmarked lines of traffic merging. When your marked lane ends, you give way to traffic in the continuing lane. Where lines of traffic merge without a marked lane change, the vehicle behind gives way to the vehicle ahead. Apply the road layout, not a blanket 'zipper always' slogan.

Reversing

Avoid reversing where a forward route is practical. Before reversing, inspect the path, ground, overhead space and rear clearance. A pedestrian can enter after the inspection, so continue monitoring. Use a trained guide where needed, agree signals and keep the guide in a safe visible location. If the guide disappears or a signal is unclear, stop immediately.

Reverse slowly enough to stop within the visible clear path. Use mirrors and camera aids without assuming they show every area. Keep people out of the path and articulation crush zones. Stop and get out to recheck if uncertainty develops. A reversing alarm warns others but does not transfer the driver’s responsibility to them.

Key decisions

Keep the speed cap, limiter requirement and safe-speed decision separate. Only overtake, change lanes or reverse when the full movement can be completed safely.

Official sources

Road Rules 2019, speed, overtaking, lane changes and reversing ; handbook speed limiters and manoeuvres ; Tasmanian ADR 65 applicability . Sources checked 10 October 2026.