Study guide

5.2 Turning, Lane Position and Turning Signs

Tasmania Heavy Vehicle Knowledge Test — Free Study Guide 2026 Exam

Track your progress as you read

Finished sections get a check mark.

1 1. Licence Classes and the Knowledge Test

1.1 Choosing LR, MR, HR, HC or MC 1.2 Eligibility and Assessment Pathways 1.3 Learner, Provisional and Gearbox Conditions 1.4 Test Administration and Licence Recognition

2 2. Fitness, Alcohol, Drugs and Fatigue

2.1 Medical Fitness, Seatbelts and Safe Cab Access 2.2 Alcohol Rules and Breath Testing 2.3 Drugs, Medicines and Driving 2.4 Recognising and Managing Fatigue

3 3. Work, Rest and Transport Responsibilities

3.1 Standard Hours and Approved Alternative Hours 3.2 Work Diaries, Records and Chain of Responsibility

4 4. Observation, Space and Vehicle Control

4.1 Observation, Road Position and Hazard Planning 4.2 Following Gaps, Separation and Stopping Distance 4.3 Brake Failure, Skids and Combination Stability 4.4 Hills, Curves, Weather and Animals

5 5. Heavy Vehicle Signs and Manoeuvres

5.1 Clearance, Load, Entry and Route Restrictions 5.2 Turning, Lane Position and Turning Signs 5.3 Speed Caps, Overtaking, Lane Changes and Reversing 5.4 Bus Rules and Heavy or Long Vehicle Parking

6 6. Breakdowns, Warning Triangles and Fire

6.1 Breakdown Safety and Warning Triangles 6.2 Vehicle Fire and Emergency Assistance

7 7. General Tasmanian Traffic Rules

7.1 Signs, Signals and Intersection Priority 7.2 Roundabouts, Merging and Road Markings 7.3 Railway and Pedestrian Crossings 7.4 Speed Zones, School Buses, Cyclists and Emergency Vehicles 7.5 Parking, Distraction, Restraints and Crash Duties

8 8. Roadworthiness, Brakes and Transmission

8.1 Pre-departure Checks and Maintenance Reports 8.2 Wheels, Tyres, Lights and Rear Marking Plates 8.3 Air Brake Architecture, Parking Brakes and ABS 8.4 Handbook Brake Tests and Fault Decisions 8.5 Gearboxes, Double-declutching and Auxiliary Brakes

9 9. Coupling and Uncoupling

9.1 Prime Mover and Semi-trailer Procedures 9.2 Truck-and-trailer Connections and Final Checks

10 10. Dimensions, Mass and Load Distribution

10.1 Dimensions, Rear Overhang and Projecting Loads 10.2 Ratings, Current Axle Limits and Distribution

11 11. Restraint Principles and Equipment

11.1 Performance Standards and Restraint Methods 11.2 Blocking, Dunnage, Containers, Pipes and Lashings

12 12. Dangerous Goods

12.1 Licensing, Identification and Incident Risks

13 13. Oversize Access and Permits

13.1 Notice Eligibility, Permits and Route Conditions

14 14. Traffic Offences and Licence Consequences

14.1 Demerit Points, Speeding and Other Offences

15 15. Inspections, Defects, Noise and Smoke

15.1 Checking Stations and Return to Roadworthy Use

5.2 Turning, Lane Position and Turning Signs

Key Takeaways Explain This Topic AI

Vehicles at least 7.5 m long displaying DO NOT OVERTAKE TURNING VEHICLE can use specified adjacent-lane turning exceptions when necessary and safe.

Indicators must give sufficient warning; the five-second minimum applies when moving from a stationary roadside position.

Check trailer cut-in, tail swing, pedestrians and cyclists throughout the turn, and keep the exit clear before entering.

Last updated: October 2026

Plan the swept path

The swept path is the space occupied by every part of the vehicle as it moves through a turn. Rear wheels commonly follow an inner path at low speed, called cut-in or off-tracking. The body behind the rear axle can swing outward, called tail swing . A safe turn accounts for both, rather than watching only the cab’s front corner.

The amount depends on wheelbase, body overhang, articulation, steering and the curve. There is no fixed cut-in distance for every HR truck or HC combination. Learn the actual vehicle through training and suitable controlled practice. Route planning should avoid corners that cannot be negotiated lawfully and safely.

Position early and communicate

Choose the correct approach lane well before the intersection, follow lane arrows and signal long enough to warn other road users. There is no universal Tasmanian rule requiring an indicator exactly 30 metres before every turn. When moving from a stationary position at the side of a road, signal for at least five seconds before moving, check mirrors and blind spots, and give way as required.

For a left turn, the usual position is from the left lane or as near as practicable to the left. A long vehicle may need to start further into the intersection so its rear wheels clear the kerb. Watch the left side for a cyclist or car entering the gap. Do not make an unplanned outward swing that appears to be a right turn and then cut across following traffic.

  • Part of the turn Clearance risk Observation task
  • Initial steering Tail swings outward Check the opposite side and nearby vehicles
  • Middle of the turn Rear wheels cut inward Monitor kerb, poles and vulnerable road users
  • Exit Trailer may still occupy the intersection Confirm the whole vehicle can clear
  • Dual turn lanes Adjacent traffic follows its marked path Keep the chosen path and avoid lane encroachment
  • DO NOT OVERTAKE TURNING VEHICLE

A vehicle or combination at least 7.5 m long can display the prescribed DO NOT OVERTAKE TURNING VEHICLE sign. The rules provide specific exceptions allowing necessary adjacent-lane positioning for a turn when their conditions are met. The vehicle must display the sign, the normal lane must be impracticable for the turn where required, and the turn must be safe.

The sign also restricts other drivers from overtaking the turning vehicle on the relevant side in the circumstances described by the road rules. It is a warning about the long vehicle’s path, not a general right of way. The driver must still obey traffic lights, give-way rules, lane controls and duties toward pedestrians and cyclists. A sign does not permit forcing another road user out of a lane.

Right turns and one-way roads

A right turn from a two-way road normally starts near the centreline or from the marked right-turn lane. From a one-way road, the usual approach is the far-right side or lane. A qualifying long vehicle displaying the turning sign can use the lane immediately left of the far-right lane under the applicable exception. Check that the adjacent-lane position is necessary and the full movement can be completed safely.

The handbook advises the far-left of two right-turn lanes for a long vehicle. Understand the reason: it gives space for the vehicle’s longer path while avoiding a turn begun too early that causes the rear to cut across the inner lane. Follow the actual lane markings and geometry. If the intended vehicle cannot remain safely within the available path, arrange a suitable route rather than assume the sign authorises any movement.

Entering and crossing traffic

A loaded heavy vehicle may accelerate slowly. Select a gap long enough for the entire vehicle to cross or merge without making others brake sharply. Estimate the trailer’s clearance time, not just the cab’s entry. On an uphill start or a slippery surface, the time may be longer. If the gap is uncertain, wait for a better one.

Do not enter a blocked intersection even on a green signal. Look beyond the crossing and allow room for the complete combination. The rear trailer left across an intersection can obstruct traffic or a pedestrian crossing after the cab has reached the far side. A gap measured for a car may be inadequate for a loaded combination.

A realistic left-turn decision

An HR truck approaches a narrow left turn while a cyclist rides beside it. The driver has a turning sign and needs extra space. The correct decision is to wait until the cyclist’s position is clear and the swept path is safe, then use the lawful turning position. The sign does not justify beginning the turn and expecting the cyclist to escape.

After a turn, check mirrors to confirm the rear has cleared roadside objects and that the vehicle is fully in its intended lane. Cancel the indicator when the movement is complete. If conditions change mid-manoeuvre, stop under control rather than continue into a known obstruction.

Key decisions

Plan the full path, use the precise long-vehicle exceptions and give way where required. Clear space and confirmed observation are prerequisites, even with a turning sign.

Official sources

Road Rules 2019, rules 28, 32, 33, 111 and 143 ; handbook turning guidance . Sources checked 10 October 2026.