Study guide

1.1 Choosing LR, MR, HR, HC or MC

Tasmania Heavy Vehicle Knowledge Test — Free Study Guide 2026 Exam

Track your progress as you read

Finished sections get a check mark.

1 1. Licence Classes and the Knowledge Test

1.1 Choosing LR, MR, HR, HC or MC 1.2 Eligibility and Assessment Pathways 1.3 Learner, Provisional and Gearbox Conditions 1.4 Test Administration and Licence Recognition

2 2. Fitness, Alcohol, Drugs and Fatigue

2.1 Medical Fitness, Seatbelts and Safe Cab Access 2.2 Alcohol Rules and Breath Testing 2.3 Drugs, Medicines and Driving 2.4 Recognising and Managing Fatigue

3 3. Work, Rest and Transport Responsibilities

3.1 Standard Hours and Approved Alternative Hours 3.2 Work Diaries, Records and Chain of Responsibility

4 4. Observation, Space and Vehicle Control

4.1 Observation, Road Position and Hazard Planning 4.2 Following Gaps, Separation and Stopping Distance 4.3 Brake Failure, Skids and Combination Stability 4.4 Hills, Curves, Weather and Animals

5 5. Heavy Vehicle Signs and Manoeuvres

5.1 Clearance, Load, Entry and Route Restrictions 5.2 Turning, Lane Position and Turning Signs 5.3 Speed Caps, Overtaking, Lane Changes and Reversing 5.4 Bus Rules and Heavy or Long Vehicle Parking

6 6. Breakdowns, Warning Triangles and Fire

6.1 Breakdown Safety and Warning Triangles 6.2 Vehicle Fire and Emergency Assistance

7 7. General Tasmanian Traffic Rules

7.1 Signs, Signals and Intersection Priority 7.2 Roundabouts, Merging and Road Markings 7.3 Railway and Pedestrian Crossings 7.4 Speed Zones, School Buses, Cyclists and Emergency Vehicles 7.5 Parking, Distraction, Restraints and Crash Duties

8 8. Roadworthiness, Brakes and Transmission

8.1 Pre-departure Checks and Maintenance Reports 8.2 Wheels, Tyres, Lights and Rear Marking Plates 8.3 Air Brake Architecture, Parking Brakes and ABS 8.4 Handbook Brake Tests and Fault Decisions 8.5 Gearboxes, Double-declutching and Auxiliary Brakes

9 9. Coupling and Uncoupling

9.1 Prime Mover and Semi-trailer Procedures 9.2 Truck-and-trailer Connections and Final Checks

10 10. Dimensions, Mass and Load Distribution

10.1 Dimensions, Rear Overhang and Projecting Loads 10.2 Ratings, Current Axle Limits and Distribution

11 11. Restraint Principles and Equipment

11.1 Performance Standards and Restraint Methods 11.2 Blocking, Dunnage, Containers, Pipes and Lashings

12 12. Dangerous Goods

12.1 Licensing, Identification and Incident Risks

13 13. Oversize Access and Permits

13.1 Notice Eligibility, Permits and Route Conditions

14 14. Traffic Offences and Licence Consequences

14.1 Demerit Points, Speeding and Other Offences

15 15. Inspections, Defects, Noise and Smoke

15.1 Checking Stations and Return to Roadworthy Use

1.1 Choosing LR, MR, HR, HC or MC

Key Takeaways Explain This Topic AI

LR covers rigid vehicles above 4.5 t and up to 8 t GVM, and vehicles up to 8 t seating more than 12 adults including the driver.

MR covers two-axle rigid vehicles above 8 tonnes GVM; HR covers rigid vehicles above 8 tonnes with three or more axles, including articulated buses.

HC covers semi-trailers and rigid vehicles towing trailers above 9 tonnes GVM; MC covers B-doubles and other multi-combinations.

Last updated: October 2026

Read the vehicle before selecting the licence

A heavy vehicle knowledge question may describe a truck without naming its licence class. Start with the configuration : is it one rigid vehicle, a prime mover with a semi-trailer, a rigid truck towing a heavy trailer, or a combination with several trailers? Then use rated mass and axles. Paintwork, cargo type and the driver’s job title do not determine the class.

Gross Vehicle Mass (GVM) is the manufacturer’s maximum loaded mass rating for the vehicle. It is not the weight shown by a weighbridge on today’s empty trip. Unloading a truck does not turn its required licence into a lower class. Gross Combination Mass (GCM) is the manufacturer’s maximum rating for the towing vehicle and its combination. Licence classification and legal loading are separate checks: an appropriate licence does not authorise overloading.

The class hierarchy

Class Principal vehicle entitlement Trailer boundary

LR — Light Rigid Rigid vehicle above 4.5 t and up to 8 t GVM, or vehicle up to 8 t seating more than 12 adults including driver Trailer not above 9 t GVM

MR — Medium Rigid Rigid truck or bus above 8 t GVM with two axles Trailer not above 9 t GVM

HR — Heavy Rigid Rigid vehicle above 8 t GVM with three or more axles; articulated bus Trailer not above 9 t GVM

HC — Heavy Combination Prime mover and semi-trailer; rigid vehicle towing a trailer above 9 t GVM Heavy combination entitlement

MC — Multi Combination B-double and other multi-combination vehicles Multiple combination entitlement

LR also includes vehicles up to 8 t GVM seating more than 12 adults including the driver, even when their GVM is 4.5 t or less. Do not decide that every minibus is a car simply because its mass is low. Passenger seats and the licence definitions still matter. Conversely, axle count alone does not make a rigid vehicle above the LR mass range: assess mass first, then the MR/HR distinction.

A rigid vehicle carries its body and load on one chassis. An articulated bus has a pivoting passenger body, but it is specifically included in HR; it is not classified as a prime mover and semi-trailer just because it bends. A semi-trailer transfers part of its weight to the towing vehicle through the fifth wheel. A dog trailer has axle groups at its front and rear; a pig trailer has its axle group near the middle. Those trailer designs affect handling and loading, but a heavy trailer behind a rigid truck still requires the relevant combination entitlement.

Work through the boundaries

Consider a two-axle rigid delivery truck rated at 7.8 t. Its mass lies in LR, regardless of whether it carries furniture or refrigerated food. A two-axle rigid rated at 10 t moves into MR. A three-axle rigid rated at 24 t requires HR. If that HR truck tows a trailer rated above 9 t, the driver needs HC for the combination even when the trailer happens to be empty.

Now consider a prime mover towing one semi-trailer. Choose HC from its configuration rather than counting tyres. If a second semi-trailer is attached through the first trailer’s fifth wheel to form a B-double, the class is MC. An unladen converter dolly is a specific HC exception: it may accompany the handbook’s qualifying prime-mover/semi-trailer or rigid/heavy-trailer combination. A prime mover towing a dolly and one semi-trailer is also within HC. Do not classify every additional dolly as an MC combination; distinguish these expressly included arrangements from a combination carrying another loaded trailer. Route permission for that B-double is a separate issue; an MC licence does not give unrestricted road access.

A higher heavy vehicle class normally includes lower classes in the national hierarchy. That is useful when an HC driver operates an HR rigid for a different shift. However, read the actual licence conditions. An automatic or synchromesh restriction may prevent driving a non-synchromesh vehicle even though the class letter is sufficient. An ancillary passenger-service authority, dangerous goods licence or access permit can also be needed in addition to the vehicle class.

A reliable classification routine

Identify each vehicle unit and whether the vehicle is rigid or articulated.

Read the GVM ratings rather than guessing from appearance or today’s load.

For a rigid vehicle above 8 t, distinguish two axles from three or more.

Check whether a trailer exceeds the 9 t class boundary.

Count the combination units and identify a B-double or other multi-combination.

Check gearbox conditions and any separate operating authority.

A licence question and a mass-limit question may use the same numbers for different purposes. The 4.5 t threshold identifies heavy vehicles in many rules; 8 t separates LR from larger rigid classes; 9 t is a trailer entitlement boundary. None is a universal axle mass allowance. Keep each number attached to its definition.

Key decisions

Use the rated vehicle and its configuration to select the class. Treat trailer attachment as a fresh entitlement check, retain every applicable licence condition, and check route access independently when the configuration changes.

Official sources

Heavy vehicle licence classes and conditions ; official handbook, Chapter 1 . Sources checked 10 October 2026.

Loading diagram... Class selection sequence