Study guide

6.1 Breakdown Safety and Warning Triangles

Tasmania Heavy Vehicle Knowledge Test — Free Study Guide 2026 Exam

Track your progress as you read

Finished sections get a check mark.

1 1. Licence Classes and the Knowledge Test

1.1 Choosing LR, MR, HR, HC or MC 1.2 Eligibility and Assessment Pathways 1.3 Learner, Provisional and Gearbox Conditions 1.4 Test Administration and Licence Recognition

2 2. Fitness, Alcohol, Drugs and Fatigue

2.1 Medical Fitness, Seatbelts and Safe Cab Access 2.2 Alcohol Rules and Breath Testing 2.3 Drugs, Medicines and Driving 2.4 Recognising and Managing Fatigue

3 3. Work, Rest and Transport Responsibilities

3.1 Standard Hours and Approved Alternative Hours 3.2 Work Diaries, Records and Chain of Responsibility

4 4. Observation, Space and Vehicle Control

4.1 Observation, Road Position and Hazard Planning 4.2 Following Gaps, Separation and Stopping Distance 4.3 Brake Failure, Skids and Combination Stability 4.4 Hills, Curves, Weather and Animals

5 5. Heavy Vehicle Signs and Manoeuvres

5.1 Clearance, Load, Entry and Route Restrictions 5.2 Turning, Lane Position and Turning Signs 5.3 Speed Caps, Overtaking, Lane Changes and Reversing 5.4 Bus Rules and Heavy or Long Vehicle Parking

6 6. Breakdowns, Warning Triangles and Fire

6.1 Breakdown Safety and Warning Triangles 6.2 Vehicle Fire and Emergency Assistance

7 7. General Tasmanian Traffic Rules

7.1 Signs, Signals and Intersection Priority 7.2 Roundabouts, Merging and Road Markings 7.3 Railway and Pedestrian Crossings 7.4 Speed Zones, School Buses, Cyclists and Emergency Vehicles 7.5 Parking, Distraction, Restraints and Crash Duties

8 8. Roadworthiness, Brakes and Transmission

8.1 Pre-departure Checks and Maintenance Reports 8.2 Wheels, Tyres, Lights and Rear Marking Plates 8.3 Air Brake Architecture, Parking Brakes and ABS 8.4 Handbook Brake Tests and Fault Decisions 8.5 Gearboxes, Double-declutching and Auxiliary Brakes

9 9. Coupling and Uncoupling

9.1 Prime Mover and Semi-trailer Procedures 9.2 Truck-and-trailer Connections and Final Checks

10 10. Dimensions, Mass and Load Distribution

10.1 Dimensions, Rear Overhang and Projecting Loads 10.2 Ratings, Current Axle Limits and Distribution

11 11. Restraint Principles and Equipment

11.1 Performance Standards and Restraint Methods 11.2 Blocking, Dunnage, Containers, Pipes and Lashings

12 12. Dangerous Goods

12.1 Licensing, Identification and Incident Risks

13 13. Oversize Access and Permits

13.1 Notice Eligibility, Permits and Route Conditions

14 14. Traffic Offences and Licence Consequences

14.1 Demerit Points, Speeding and Other Offences

15 15. Inspections, Defects, Noise and Smoke

15.1 Checking Stations and Return to Roadworthy Use

6.1 Breakdown Safety and Warning Triangles

Key Takeaways Explain This Topic AI

Road rule 226 requires a motor vehicle above 12 t GVM to carry at least three portable warning triangles.

When the stopped vehicle or fallen load is not visible for 200 m in all directions, rule 227 requires the relevant triangle placement.

Place one triangle 50–150 m ahead, one 50–150 m behind, and one at the side where it gives sufficient warning.

Last updated: October 2026

Make the first stop as safe as possible

A breakdown can leave the vehicle where traffic does not expect it. If control remains available, move to a suitable safe location without creating another hazard. Avoid stopping just beyond a crest, around a blind bend or where the trailer blocks a live lane. Use the remaining control to reduce speed smoothly, communicate with indicators or hazard lights as appropriate, and secure the vehicle once stopped.

A hazard warning light alerts others but does not replace warning triangles where required. Nor does it make a live-lane obstruction safe. Consider the position of the whole vehicle and any fallen load, the available sight distance, approaching traffic, weather and the driver’s safe way to leave the cab.

Carrying versus displaying triangles

Road rule 226 requires the driver of a motor vehicle with GVM over 12 t to carry at least three portable warning triangles . This is a carrying threshold; it is not a blanket statement that every bus over 5 t must carry them under that rule. Check additional operating or vehicle requirements separately where relevant.

Rule 227 addresses a motor vehicle above 12 t stopped on a road, or a load that has fallen from it, when the vehicle or load is not visible for at least 200 m in all directions . The rule’s road definition includes the shoulder but excludes road-related areas. The visibility trigger can apply by day as well as at night. Bright daylight does not guarantee that traffic beyond a bend can see the obstruction.

The statutory placement

  • Triangle General placement under rule 227 Purpose
  • Front At least 50 m and not more than 150 m ahead Warn traffic approaching from that direction
  • Rear At least 50 m and not more than 150 m behind Warn traffic approaching from behind
  • Side At the side, positioned to give sufficient warning Mark the immediate obstruction

Do not substitute 200–250 m distances from a different jurisdiction or an invented separate divided-road arrangement. The 200 m figure is the visibility trigger, not the distance for placing the front and rear triangles. Read the current rule when answering a numerical question.

Take account of approaching traffic and personal safety while placing warnings. Do not step into a live lane without a safe opportunity or remain exposed to traffic while repairing a fault. If the situation is too dangerous to manage safely, call for emergency assistance and traffic protection. Safety decisions and lawful directions at the scene can require professional help beyond the driver’s own equipment.

Plan people as well as equipment

Secure the vehicle with the appropriate parking brake and other measures for the site and vehicle. Choose the safer side for exiting when possible and inspect the ground below the steps. Use three points of contact. Keep occupants and bystanders away from traffic, unstable loads and the vehicle’s crush zones. A position behind a barrier may be safer where it is accessible without entering another hazard.

Do not stand directly behind the vehicle expecting the hazard lights to protect you from an approaching driver. Keep a safe escape option. If passengers are present, provide clear instructions and obtain help when their movement creates additional risk. Emergency services can help determine evacuation or traffic-control needs in a hazardous location.

Communicate useful information

When calling the operator, recovery service or emergency services, give the road name, direction of travel, nearest identifiable landmark, vehicle type, lane obstruction and whether people are injured. Mention a dangerous-goods load, fire, leaking fuel, unstable cargo or electrical hazards. Accurate information helps the responder choose equipment and protection rather than send an unsuitable small recovery vehicle.

A driver should not attempt repairs beyond their competence or work under a vehicle supported only by an unsafe arrangement. Hot components, pressurised air systems and loaded suspension can create serious hazards. Report the symptoms, warning lights and circumstances so a qualified repairer can diagnose the fault. After a repair, confirm the required checks and any defect clearance before resuming.

Fallen loads and return to traffic

A fallen load can remain an obstruction even after the truck is moved. Warn traffic as required, keep people away and arrange safe recovery. Do not walk into a high-speed lane to collect scattered freight without protection. A damaged restraint system must be corrected before the remaining cargo is transported.

Before rejoining traffic, inspect the vehicle and load, stow equipment safely and restore the normal travel configuration. Signal and give way from the stationary roadside position, including the five-second signal requirement where applicable. Accelerate only when there is enough room for the full vehicle to enter without creating a hazard. A recovery delay is not a reason to omit checks or exceed fatigue limits.

Key decisions

Know the carrying threshold, visibility trigger and placement distances separately. Protect people, obtain suitable assistance and confirm roadworthiness before continuing.

Official sources

Road Rules 2019, rules 226–227 ; handbook warning triangles . Sources checked 10 October 2026.