Study guide

8.1 Pre-departure Checks and Maintenance Reports

Tasmania Heavy Vehicle Knowledge Test — Free Study Guide 2026 Exam

Track your progress as you read

Finished sections get a check mark.

1 1. Licence Classes and the Knowledge Test

1.1 Choosing LR, MR, HR, HC or MC 1.2 Eligibility and Assessment Pathways 1.3 Learner, Provisional and Gearbox Conditions 1.4 Test Administration and Licence Recognition

2 2. Fitness, Alcohol, Drugs and Fatigue

2.1 Medical Fitness, Seatbelts and Safe Cab Access 2.2 Alcohol Rules and Breath Testing 2.3 Drugs, Medicines and Driving 2.4 Recognising and Managing Fatigue

3 3. Work, Rest and Transport Responsibilities

3.1 Standard Hours and Approved Alternative Hours 3.2 Work Diaries, Records and Chain of Responsibility

4 4. Observation, Space and Vehicle Control

4.1 Observation, Road Position and Hazard Planning 4.2 Following Gaps, Separation and Stopping Distance 4.3 Brake Failure, Skids and Combination Stability 4.4 Hills, Curves, Weather and Animals

5 5. Heavy Vehicle Signs and Manoeuvres

5.1 Clearance, Load, Entry and Route Restrictions 5.2 Turning, Lane Position and Turning Signs 5.3 Speed Caps, Overtaking, Lane Changes and Reversing 5.4 Bus Rules and Heavy or Long Vehicle Parking

6 6. Breakdowns, Warning Triangles and Fire

6.1 Breakdown Safety and Warning Triangles 6.2 Vehicle Fire and Emergency Assistance

7 7. General Tasmanian Traffic Rules

7.1 Signs, Signals and Intersection Priority 7.2 Roundabouts, Merging and Road Markings 7.3 Railway and Pedestrian Crossings 7.4 Speed Zones, School Buses, Cyclists and Emergency Vehicles 7.5 Parking, Distraction, Restraints and Crash Duties

8 8. Roadworthiness, Brakes and Transmission

8.1 Pre-departure Checks and Maintenance Reports 8.2 Wheels, Tyres, Lights and Rear Marking Plates 8.3 Air Brake Architecture, Parking Brakes and ABS 8.4 Handbook Brake Tests and Fault Decisions 8.5 Gearboxes, Double-declutching and Auxiliary Brakes

9 9. Coupling and Uncoupling

9.1 Prime Mover and Semi-trailer Procedures 9.2 Truck-and-trailer Connections and Final Checks

10 10. Dimensions, Mass and Load Distribution

10.1 Dimensions, Rear Overhang and Projecting Loads 10.2 Ratings, Current Axle Limits and Distribution

11 11. Restraint Principles and Equipment

11.1 Performance Standards and Restraint Methods 11.2 Blocking, Dunnage, Containers, Pipes and Lashings

12 12. Dangerous Goods

12.1 Licensing, Identification and Incident Risks

13 13. Oversize Access and Permits

13.1 Notice Eligibility, Permits and Route Conditions

14 14. Traffic Offences and Licence Consequences

14.1 Demerit Points, Speeding and Other Offences

15 15. Inspections, Defects, Noise and Smoke

15.1 Checking Stations and Return to Roadworthy Use

8.1 Pre-departure Checks and Maintenance Reports

Key Takeaways Explain This Topic AI

Check the vehicle before the shift using the handbook and manufacturer’s instructions, including previously reported defects.

Inspect body, controls, electrics, fluids, fuel and exhaust systems, steering, structure, suspension, windows, seats and coupling.

Make a written report of maintenance or mechanical problems to the owner and confirm repair and any required clearance.

Last updated: October 2026

Inspect systematically rather than casually

A pre-departure check is a structured examination before using the vehicle. It helps find problems before they cause a loss of control or an expensive roadside failure. The driver remains responsible for using a safe, roadworthy vehicle even when a workshop or previous driver has checked it. Read the handover information and give particular attention to faults already reported.

Use the manufacturer’s instructions and the operator’s suitable checklist. A consistent route around the vehicle reduces omissions. Choose a safe inspection area, secure the vehicle and keep clear of moving yard traffic. Do not place hands near moving belts or work under an unsupported vehicle. Driver checks identify faults; they do not authorise untrained repairs to safety systems.

Engine compartment and fluids

Check engine oil, coolant, screen washer fluid and the applicable brake, clutch and power-steering fluids. Levels and checking conditions vary by vehicle. Do not open a hot pressurised cooling system or add an unsuitable fluid. Inspect visible hoses, belts, mountings and connections for damage, looseness and leaks. A wet patch should be investigated rather than assumed to be harmless water.

Check that fuel tanks, caps and lines are secure and not leaking. Gas-fuelled vehicles have specific identification, compliance and inspection requirements; use the correct refuelling and maintenance procedure. Inspect the exhaust for damage, loose mountings or leaks. Fumes entering the cab and excessive smoke or noise require attention, not merely a closed window.

Body, structure and running gear

  • Area Examples of useful checks
  • Body and doors Damage, secure cargo doors, guards, mudflaps, steps and handholds
  • Structure Cracks, distortion, insecure mountings and advanced corrosion
  • Steering Secure components, damage and excessive free play
  • Suspension Broken or sagging parts, leaks, insecure components and abnormal vehicle posture
  • Wheels and tyres Correct attachment, damage, inflation and tread
  • Coupling Secure mountings, correct locking, lines and cables

Corrosion is especially serious in structural parts or panels separating occupants from fuel and fumes. Do not judge it only as a cosmetic paint issue. A leaning vehicle can indicate uneven loading, a suspension fault or tyre trouble. Determine the cause before movement, since simply correcting load position may not fix a mechanical problem.

A trailer is part of the inspection. Check its body, wheels, suspension, brakes, lights, coupling and load. For a combination, inspect each unit and the connections between them. The prime mover’s good condition does not establish the rear trailer’s condition.

Cab, visibility and controls

Check the seat mounting, adjustment and seatbelt. Set the seat and mirrors for the driver, and verify doors and locks operate. Keep the windscreen and windows clear and assess damage affecting the driver’s view. Wipers, washers and demisting must work effectively. Dirt, glare or a failed demister can reduce observation even when the glass itself is intact.

Check steering, pedals, gear controls, horn and warning devices. Know what the dashboard lamps mean and confirm their expected start-up checks. A warning that remains on should not be covered with tape or ignored because the vehicle still moves. Ensure tools and luggage cannot interfere with pedals or become projectiles.

Operate the lights and indicators and walk around to confirm them. Reflection on a wall is not always enough to find a failed trailer lamp. Check number plates, reflectors, rear marking plates and required signs for visibility and security. Carry required warning triangles and suitable fire equipment, and know where they are.

Brakes and the load

Complete the appropriate brake-system checks for the actual vehicle, including pressure, warnings, leaks and service and parking operation. Hydraulic and full-air systems have different checks. Manufacturer procedures govern the specific equipment; do not substitute a remembered pressure from a different truck.

Check the load’s position, mass, dimensions and restraint. Inspect lashings, doors, gates and any lifting or loading equipment in the travel position. A secure-looking tarpaulin is not proof that the goods beneath it are restrained. Make sure the load does not obscure lights, plates, mirrors or required signs.

Report, repair and verify

The handbook requires a written report of maintenance or mechanical problems on the owner’s form. Describe symptoms clearly: which warning appeared, when it occurred, any noise, pull, leak or change in performance. A vague note saying 'brakes bad' is less useful than the location and conditions of the fault. Report urgent problems immediately as well as completing the written record.

Keep repair records and check that the fault has actually been fixed. If it persists, return it to the repairer rather than assume the invoice proves success. A defect notice can impose a prohibition or restricted use and clearance requirements; read those conditions before any further trip. The severity and allowed use are not decided by a driver calling the problem 'minor'.

For example, a vehicle returns from a repair with the same low-air warning behaviour. Do not depart because the workshop signed the job card. Report the recurrence and obtain a proper assessment. The departure check is the final opportunity to prevent an unresolved fault entering traffic.

Key decisions

Inspect the whole configuration, act on warnings and document symptoms. A completed checklist supports judgement; it does not replace it.

Official sources

Official handbook, knowing the vehicle and pre-departure checklists ; NHVR National Heavy Vehicle Inspection Manual . Sources checked 10 October 2026.