Study guide

Chain of Responsibility, Weighbridge Stops, and Enforcement Powers

VicRoads Heavy Vehicle Knowledge Test — Rigid KT4

Track your progress as you read

Finished sections get a check mark.

1 Victorian Road Rules — Driver Obligations

Speed Limits for Heavy Vehicles in Victoria Zero BAC and Roadside Drug Testing for Heavy Vehicle Drivers Seatbelts, Parking Restrictions, and Night-Time Clearance Lighting Railway Crossing Procedures for Buses and Heavy Vehicles

2 Victorian Road Rules — Road Situations and Chain of Responsibility

Portable Warning Triangles: Carriage, Placement, and AS 3790 Following Distances, Lane Changes, and Turn Procedures for Long Vehicles Chain of Responsibility, Weighbridge Stops, and Enforcement Powers

3 Heavy Vehicle Law, Dimensions, and Access

Heavy Vehicle Licence Classes and Transmission Restrictions Mass and Dimension Limits for Rigid Vehicles Heavy Vehicle Road Signs, Access Restrictions, and Oversize/Overmass Permits

4 Vehicle Inspections and Roadworthiness

Pre-Operational Daily Checks: Cabin, Engine, Tyres, Brakes, and Lights Air Brake vs Hydraulic Brake System Checks and After-Departure Inspection Defect Identification, Roadworthiness Obligations, and Regular Mechanical Inspections

5 Vehicle Control, Braking, and Gear Selection

Double-Clutching and Gear Selection for Non-Synchromesh Gearboxes Braking Systems, Brake Fade, Stopping Distances, and Air Brake Delay Off-Tracking, Rollover Risk, Crash Avoidance Space, and Skid Correction

6 Load Restraint and Load Rules

6.1 Load Restraint Performance Standards 6.2 Tie-down vs Direct Restraint Methods 6.3 Load Placement, Distribution, Overhang Limits, and Load Security Checks

7 Fatigue Management and Work Diary

Standard Hours, BFM, AFM and ACH: Work/Rest Options and Fatigue-Regulated Vehicles National Driver Work Diary: Requirements, Completion, Record-Keeping, and Fatigue Prevention

8 Coupling and Combination Vehicle Rules

Coupling and Uncoupling: Procedures, Air Lines, Trailer Park Brake, Roll-Away Confirmation, and HC Licence Threshold

Chain of Responsibility, Weighbridge Stops, and Enforcement Powers

Key Takeaways Explain This Topic AI

Chain of Responsibility (CoR) means anyone with control over a transport operation shares responsibility for safety — control equals responsibility equals liability

The HVNL lists ten CoR parties: employer, prime contractor, operator, scheduler, consignor, consignee, packer, loading manager, loader and unloader; driving is not a CoR function, but drivers have their own duties

You must stop at a weighbridge when directed by Police, TSS, or an authorised officer; failing to stop is a serious offence

Victoria Police and the Transport Safety Service (TSS) can inspect mass, dimensions, load restraint, fatigue records, and the vehicle at any time, including roadside and at weighbridges

CoR breaches cover mass, dimension, load restraint, speeding, and fatigue — the same offences the driver commits can also be committed by the operator, scheduler, consignor, or consignee

Last updated: October 2026

Chain of Responsibility, Weighbridge Stops, and Enforcement Powers

Quick Answer: Under the Chain of Responsibility (CoR) , every party with control over a heavy vehicle transport task shares legal responsibility for safety. The rule is simple: control = responsibility = liability . Parties include the employer, prime contractor, operator, scheduler, consignor, consignee, packer, loading manager, loader and unloader. Driving is not a CoR function — drivers have their own duties under the HVNL. You must stop at a weighbridge when directed by Victoria Police or the Transport Safety Service (TSS) ; failing to stop is a serious offence. Enforcement powers include inspecting mass, dimensions, load restraint, work diary, and the vehicle itself.

Chain of Responsibility — The Core Principle

If only the driver could be prosecuted for breaches like overloading or speeding, companies would be let off the hook: a driver under pressure from a scheduler would speed to meet a deadline, get caught, and the company would face no consequences. CoR closes that loophole.

The principle is: if you have control over a transport activity, you have responsibility for it, and you can be held liable for breaches you cause or could have prevented. Section 26C of the HVNL gives each party in the chain a Primary Duty : to ensure, so far as is reasonably practicable, the safety of the party's transport activities, including by making sure its conduct does not cause or encourage a driver to break the law or exceed a speed limit.

Parties in the Chain

Party What they do Example duty

Operator Runs the vehicle (registered operator or company using the truck) Maintain roadworthy vehicles, ensure drivers are licensed, not schedule beyond fatigue limits

Employer Employs the driver Do not set rosters, pay or targets that encourage speeding or fatigued driving

Consignor Sends the goods (the freight's owner or the party engaging the freight) Do not require or induce a breach — e.g. do not set a delivery time that requires speeding

Consignee Receives the goods Do not impose penalties on the operator for late delivery that incentivise a breach

Loader Loads the vehicle Ensure mass is within limits, load is distributed correctly and restrained

Packer Packs goods into a container or load Ensure the load is packed to prevent shifting and within mass limits

Scheduler Schedules the goods or passengers, or the driver's work and rest hours Allow enough time for the trip within the driver's work and rest hours

Prime contractor, loading manager, unloader Engages a self-employed driver; manages loading or unloading premises; unloads the vehicle Same Primary Duty for their own activities

The NHVR is explicit that "Driving is not one of the CoR functions." An employed driver is not a party in the chain because they drive, but drivers have their own HVNL duties — for example, not driving while impaired by fatigue or unfit (s. 228) and making sure the vehicle and load comply with loading requirements (s. 111). A driver who also loads the truck is a loader, and an owner-driver is an operator.

What does each duty actually mean?

Operator must not direct a driver to drive while fatigued, must maintain the vehicle, and must ensure the truck is not overloaded. If the operator's scheduling system requires a driver to work 14 hours in 24 hours under Standard Hours (maximum 12), the operator is in breach — not just the driver.

Consignor must not set a delivery time that can only be met by speeding or breaching fatigue. A consignor who demands delivery 600 km away within 5 hours — impossible without exceeding 100 km/h — is inducing a breach.

Consignee must not impose late-delivery penalties that pressure the operator to push the driver. A warehouse that refuses a load for being 30 minutes late, forcing a return trip under time pressure, contributes to the breach.

Loader must load within mass limits and restrain correctly. If a loader puts 30 tonnes on a 22-tonne HR rigid and the driver gets caught, both the loader and the driver can be charged.

Scheduler must allow legal time. A scheduler who plans a run that requires the driver to exceed the speed limit to arrive on time is in breach.

How a Primary Duty Breach Is Graded

The current HVNL (sections 26F to 26H) grades a breach of the Primary Duty into three offence categories:

Category 1 — without reasonable excuse, engaging in conduct related to the duty that exposes a person to a risk of death or serious injury or illness, while being reckless about that risk.

Category 2 — breaching the duty in a way that exposes a person to a risk of death or serious injury or illness.

Category 3 — breaching the duty.

In addition, an executive of a company that has a Primary Duty must exercise due diligence to make sure the company complies (s. 26D) — for example, keeping up to date on safe transport, understanding the business's risks, and making sure resources and processes are in place and used.

Weighbridge Stops in Victoria

When must you stop?

You must stop at a weighbridge when directed by:

Victoria Police (uniformed officers or traffic highway patrol)

Transport Safety Service (TSS) officers (the heavy vehicle enforcement arm of the Department of Transport and Planning)

Authorised officers under the HVNL, including NHVR-appointed officers

A direction to stop can be given by:

  • A fixed "Trucks Must Enter Weighbridge" sign on the approach to a weighbridge site
  • An electronic variable message sign with your truck's registration
  • An officer waving you in at the side of the road
  • A handheld or vehicle-mounted direction

What happens at a weighbridge?

At a typical Victorian weighbridge stop, officers can check:

Mass — axle groups and total mass against the vehicle's plated limits and the General Mass Limits (e.g. steer axle 6.0 t, single axle with dual tyres 9.0 t).

Dimensions — height (4.3 m), width (2.5 m), length, and rear overhang.

Load restraint — whether the load meets the 0.8 g forward / 0.5 g sideways and rearward performance standard.

Work diary — fatigue records, current and previous days, to verify compliance with the driver's work and rest hours.

Vehicle roadworthiness — tyres, brakes, lights, steering, suspension, and defect items.

Licence and registration — your HR licence, vehicle registration, permits for oversize/overmass if applicable.

Worked Example

You pull a two-axle rigid truck into the weighbridge at a TSS site. The axle masses show steer 5.8 t and single drive axle (dual tyres) 11.5 t. The General Mass Limit for a single axle with dual tyres is 9.0 t , so you are 2.5 t over on the drive axle even though the steer axle is within its 6.0 t limit. Consequences:

The driver can be charged with an over-mass offence.

The loader can be charged because they loaded the vehicle.

The operator can be charged because they dispatched an over-mass vehicle.

The consignor can be charged if they declared a mass that induced the overload.

The vehicle may be grounded until the excess mass is removed.

This is CoR in action — the same breach, multiple parties, parallel charges.

Enforcement Powers

Victoria Police and TSS officers have broad powers under the HVNL and Victorian road law:

Stop and inspect any heavy vehicle at any time, not just at weighbridges.

Direct a vehicle to a weighbridge — even if the weighbridge is some distance away.

Inspect the work diary and take copies.

Issue a defect notice — minor, major, or dangerous. A dangerous defect means the vehicle must not be moved until rectified.

Issue an improvement notice or prohibition — requiring the operator to fix a systemic issue.

Detain the vehicle — for serious mass or dimension breaches, the vehicle can be held until the breach is corrected.

Suspend the driver's licence in serious cases (through VicRoads).

Issue on-the-spot fines for many offences.

What you must do when directed

Stop immediately and safely — indicate, pull to the left, stop clear of traffic.

Produce your licence — HR licence card.

Produce your work diary — current and previous pages.

Cooperate with inspection — answer questions honestly, do not obstruct.

Follow directions — including moving to a weighbridge, unloading excess mass, or waiting for a defect to be assessed.

Do not argue at the roadside — you can dispute later in writing or court; obstruction at the roadside is itself an offence.

Common Exam Traps

Trap 1: "Only the driver is responsible for an overload." No — CoR means the loader, operator, consignor, and consignee can all be liable.

Trap 2: "You can skip a weighbridge if you are empty." No — if directed to stop, you stop, loaded or empty. Empty vehicles are checked for dimension and restraint issues too.

Trap 3: "CoR only covers mass." No — the Primary Duty covers the safety of all transport activities, including mass, dimension, load restraint, speeding, and fatigue.

Trap 4: "A consignee is never liable — they only receive goods." Wrong — a consignee who imposes late-delivery penalties that incentivise speeding contributes to the breach.

Trap 5: "TSS officers can only inspect at weighbridges." No — they can stop and inspect anywhere, including roadside.

Trap 6: "The driver is a CoR party because they drive." No — driving is not a CoR function, but drivers have their own HVNL duties and become a party if they also load, schedule or operate the vehicle.

Practical Guidance for HR Drivers

Know your vehicle's plated mass limits and do not exceed them; refuse a load that is too heavy and record your objection in writing if pressured.

Keep your work diary accurate and up to date — it is your defence as much as your obligation.

If a scheduler sets an impossible time, raise it with your operator; document it. CoR protects drivers who raise breaches.

At a weighbridge, cooperate fully. A calm, cooperative driver with accurate records is far less likely to be escalated.

If a defect is found, do not move a vehicle with a dangerous defect; wait for the officer's direction.

CoR is not about punishing drivers — it is about ensuring the whole chain, from consignor to consignee, shares the legal load. As an HR driver you are one link, but you are also the eyes and ears of the chain. Knowing who is liable, and what your rights are when pressured, is exam-critical and job-critical.