Study guide

8.3 Special Variables: Heat Input, Electrical Characteristics & Shielding Gases

AWS ASME BPVC Section IX + B31.1/B31.3 Endorsement CWI/SCWI

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Structure, Logistics & Code Navigation Strategy

1.1 Credential Overview, Prometric Delivery & July 2025 Hard-Copy Rule 1.2 The Three-Code Triad: Section IX, B31.1, and B31.3 Roles & Interrelationships 1.3 Rapid Code-Book Navigation: Tabbing, Cross-Referencing & Time Management

2 Chapter 2: Section IX Article I — General Welding Requirements

2.1 Scope, Responsibilities & Section IX Architecture 2.2 Mechanical Test Types, Specimen Dimensions & Acceptance Criteria 2.3 Notch-Toughness Tests, Fillet-Weld Tests & Special Examinations

3 Chapter 3: Section IX Article II — Procedure Qualification Fundamentals

3.1 PQR vs. WPS Workflow, Purpose & Content Requirements 3.2 Coupling and Supporting Multiple WPSs and PQRs 3.3 Test Coupons, Preparation & Required Test Specimen Allocations

4 Chapter 4: Section IX Procedure Qualification Limits & Thickness Rules

4.1 Base Metal & Deposited Weld Metal Thickness Limits 4.2 Impact Testing Requirements & Toughness Thickness Qualification Ranges 4.3 Fillet Weld Procedure Qualification Rules & Special Applications

5 Chapter 5: Section IX Article III — Welder Performance Qualification Fundamentals

5.1 Welder & Welding Operator Qualification Intent, Responsibilities & Identification 5.2 Qualification Testing Methods: Mechanical Bend Tests vs. Volumetric NDE 5.3 Welder Qualification Continuity, Expiration, and Requalification

6 Chapter 6: Section IX Welder Performance Limits, Positions & Diameters

6.1 Test Positions, Groove Weld Orientations & Production Position Limits 6.2 Welder Thickness Limits and Pipe Diameter Qualification Ranges 6.3 Welder Essential Variables: F-Numbers, Backing, and Process Transfers

7 Chapter 7: Section IX Article IV — Welding Variables by Process (Part 1: SMAW & GTAW)

7.1 Understanding Essential, Supplementary Essential & Nonessential Variables 7.2 Shielded Metal Arc Welding (SMAW) Procedure Variables 7.3 Gas Tungsten Arc Welding (GTAW) Procedure Variables

8 Chapter 8: Section IX Article IV — Welding Variables by Process (Part 2: GMAW/FCAW & SAW)

8.1 GMAW & FCAW Procedure Variables and Short-Circuiting Transfer Rules 8.2 Submerged Arc Welding (SAW) Procedure Variables and Flux-Wire Combinations 8.3 Special Variables: Heat Input, Electrical Characteristics & Shielding Gases

9 Chapter 9: Section IX Material Classifications, Numbers & Standard Documentation

9.1 Base Metal P-Numbers, Group Numbers, and S-Numbers 9.2 Filler Metal F-Numbers and As-Deposited Chemistry A-Numbers 9.3 ASME Standard Documentation: Auditing WPS, PQR, and WPQ Forms

10 Chapter 10: ASME B31.1 Power Piping — Scope, Materials, Design & Welding Fabrication

10.1 B31.1 Scope, Jurisdiction, Boiler External Piping vs. Non-Boiler External Piping 10.2 B31.1 Welding Requirements, Joint Alignment, Backing Rings & Tack Welds 10.3 B31.1 Welder & Procedure Qualification Interfacing with Section IX 10.4 B31.1 Materials, Design Conditions & Pressure Design of Components

11 Chapter 11: ASME B31.1 Power Piping — Heat Treatment, Examination, Testing & Fabrication Records

11.1 B31.1 Preheat Rules & Mandatory Temperatures 11.2 B31.1 Postweld Heat Treatment (PWHT) Rules, Temperatures & Holding Times 11.3 B31.1 Mandatory NDE Examination, Acceptance Standards & Pressure Leak Tests 11.4 B31.1 Bending, Forming, Assembly & Code Records

12 Chapter 12: ASME B31.3 Process Piping — Scope, Fluid Services, Materials, Design & Welding

12.1 B31.3 Scope, Fluid Service Classifications & Owner Responsibilities 12.2 B31.3 Welding, Joint Preparation, Backing Rings & Fabrication Details 12.3 B31.3 Procedure & Performance Qualification Rules and Section IX Exceptions 12.4 B31.3 Materials, Design Conditions & Pressure Design of Components

13 Chapter 13: ASME B31.3 Process Piping — Heat Treatment, Examination, Testing, Fabrication & Records

13.1 B31.3 Preheat and Postweld Heat Treatment Rules & Tables 13.2 B31.3 Inspection vs. Examination Responsibilities & Examination Extents 13.3 B31.3 Acceptance Criteria for Weld Imperfections 13.4 B31.3 Pressure Leak Testing: Hydrostatic, Pneumatic & Sensitive Leak Tests 13.5 B31.3 Bending, Forming, Assembly & Records

8.3 Special Variables: Heat Input, Electrical Characteristics & Shielding Gases

Key Takeaways Explain This Topic AI

Under paragraph QW-409.1, heat input is calculated as H = (E x I x 60) / (1000 x S) in kJ/in, or as Instantaneous Energy divided by weld bead length for waveform-controlled power supplies.

Heat input is classified as a supplementary essential variable because it directly controls cooling rates (t8/5) and coarse-grained HAZ grain coarsening, which govern Charpy V-notch impact toughness.

For modern waveform-controlled power sources (pulsed GMAW, STT, CMT), standard panel meters underestimate heat input; ASME Section IX requires instantaneous energy or power integration per QW-409.1(c) and Appendix J.

Under paragraph QW-408.2, a change in nominal composition of a shielding gas mixture greater than 5% is an essential variable requiring complete procedure requalification.

For reactive metals such as titanium and zirconium, paragraph QW-408.10 dictates that the deletion of a trailing shield or any change in trailing gas composition is an essential variable to prevent embrittlement above 800°F (427°C).

Last updated: September 2026

8.3 Special Variables: Heat Input, Electrical Characteristics & Shielding Gases

Core Principle: In ASME Section IX procedure qualification, electrical parameters and gas coverage represent the thermal and chemical engine of the welding arc. Heat input (QW-409.1) directly controls the transformation kinetics and microstructural evolution of the heat-affected zone (HAZ), making it a paramount supplementary essential variable whenever impact toughness is required. Concurrently, shielding gas chemistry (QW-408.2), backing gas purging integrity, and trailing shield coverage (QW-408.10) govern atmospheric protection, oxidation thresholds, and weld metal mechanical reliability.

1. The Physics and Mathematical Formulation of Heat Input (QW-409.1)

Heat input represents the quantity of thermal energy introduced into the base material per unit length of deposited weld bead. It balances the electrical energy generated by the arc against the forward travel speed of the welding torch.

The Standard ASME Section IX Heat Input Equation

Under paragraph QW-409.1(a) , heat input ( H H H ) is calculated using the classical equation: H = E × I × 60 1000 × S H = \frac{E \times I \times 60}{1000 \times S} H = 1000 × S E × I × 60 ​

Where:

  • H H H = Heat Input in kilojoules per inch ( kJ/in \text{kJ/in} kJ/in )
  • E E E = Welding Arc Voltage in volts ( V \text{V} V )
  • I I I = Welding Current in amperes ( A \text{A} A )
  • S S S = Travel Speed in inches per minute ( in/min \text{in/min} in/min or ipm \text{ipm} ipm )

60 60 60 = Conversion constant (seconds per minute, converting power in Watts = Joules/sec \text{Watts} = \text{Joules/sec} Watts = Joules/sec to total energy per minute)

  • 1000 1000 1000 = Conversion constant (Joules to kiloJoules, J → kJ \text{J} \to \text{kJ} J → kJ )
  • Metric Formulation

When working in SI metric units: H metric = E × I × 60 1000 × S mm/min [ kJ/mm ] H_{\text{metric}} = \frac{E \times I \times 60}{1000 \times S_{\text{mm/min}}} \quad [\text{kJ/mm}] H metric ​ = 1000 × S mm/min ​ E × I × 60 ​ [ kJ/mm ] Or, if travel speed is measured in mm/sec: H metric = E × I 1000 × S mm/sec [ kJ/mm ] \text{Or, if travel speed is measured in mm/sec: } H_{\text{metric}} = \frac{E \times I}{1000 \times S_{\text{mm/sec}}} \quad [\text{kJ/mm}] Or, if travel speed is measured in mm/sec: H metric ​ = 1000 × S mm/sec ​ E × I ​ [ kJ/mm ]

To convert between systems: 1.0 kJ/in = 1.0 25.4 kJ/mm ≈ 0.03937 kJ/mm 1.0\text{ kJ/in} = \frac{1.0}{25.4}\text{ kJ/mm} \approx 0.03937\text{ kJ/mm} 1.0 kJ/in = 25.4 1.0 ​ kJ/mm ≈ 0.03937 kJ/mm 1.0 kJ/mm = 25.4 kJ/in 1.0\text{ kJ/mm} = 25.4\text{ kJ/in} 1.0 kJ/mm = 25.4 kJ/in +----------------------------------------------------------------------------------------------------+

  • | DIMENSIONAL DERIVATION OF THE HEAT INPUT EQUATION |
  • +----------------------------------------------------------------------------------------------------+
  • | [Voltage (V)] x [Current (A)] = [Power in Watts (W)] = [Joules / second (J/s)] |
  • | [Joules / second] x [60 seconds / minute] = [Joules / minute (J/min)] |
  • | [Joules / minute] / [Travel Speed (inches / minute)] = [Joules / inch (J/in)] |
  • | [Joules / inch] / [1000 Joules / kiloJoule] = [kiloJoules / inch (kJ/in)] |
  • +----------------------------------------------------------------------------------------------------+
  • 2. Advanced Waveform-Controlled Power Sources & Instantaneous Energy

One of the most consequential developments in modern welding fabrication is the proliferation of waveform-controlled power supplies (e.g., pulsed GMAW, Surface Tension Transfer [STT], Cold Metal Transfer [CMT], Regulated Metal Deposition [RMD], and RapidArc).

The Failure of Conventional Average Formulas

In traditional constant-voltage or constant-current welding (SMAW, standard GMAW spray, SAW), voltage and amperage remain relatively steady. In waveform-controlled systems, current and voltage are modulated thousands of times per second (microsecond intervals) between high peak pulses and low background levels. Mathematical Fact: Average ( E ) × Average ( I ) ≠ Average ( E × I ) \text{Mathematical Fact: } \text{Average}(E) \times \text{Average}(I) \neq \text{Average}(E \times I) Mathematical Fact: Average ( E ) × Average ( I )  = Average ( E × I )

Because voltage and current are phase-shifted and non-linear, multiplying the average voltage displayed on a machine's digital meter by the average amperage can underestimate actual heat input by 10% to 30%! In fracture-critical applications, this error allows un-certified high-heat-input welds to enter production, causing premature catastrophic failures.

Paragraph QW-409.1(c) and Nonmandatory Appendix J Solutions

To resolve this physical discrepancy, ASME Section IX revised QW-409.1 to mandate one of two calculation methods for waveform-controlled welding:

Instantaneous Energy Integration: E instantaneous = ∑ i = 1 n ( E i × I i × Δ t ) [ Joules ] E_{\text{instantaneous}} = \sum_{i=1}^{n} \left( E_i \times I_i \times \Delta t \right) \quad [\text{Joules}] E instantaneous ​ = i = 1 ∑ n ​ ( E i ​ × I i ​ × Δ t ) [ Joules ] H = E instantaneous 1000 × L [ kJ/in ] H = \frac{E_{\text{instantaneous}}}{1000 \times L} \quad [\text{kJ/in}] H = 1000 × L E instantaneous ​ ​ [ kJ/in ]

Where L L L is the length of the weld bead deposited (in inches), and energy is calculated by real-time digital sampling at high frequency (typically > 10 kHz > 10\text{ kHz} > 10 kHz ).

Instantaneous Power (Average of Instantaneous Power): P instantaneous = 1 n ∑ i = 1 n ( E i × I i ) [ Watts ] P_{\text{instantaneous}} = \frac{1}{n} \sum_{i=1}^{n} \left( E_i \times I_i \right) \quad [\text{Watts}] P instantaneous ​ = n 1 ​ i = 1 ∑ n ​ ( E i ​ × I i ​ ) [ Watts ] H = P instantaneous × 60 1000 × S [ kJ/in ] H = \frac{P_{\text{instantaneous}} \times 60}{1000 \times S} \quad [\text{kJ/in}] H = 1000 × S P instantaneous ​ × 60 ​ [ kJ/in ]

Modern welding power sources display total energy in Joules ( J J J ) or kiloJoules ( k J kJ k J ) directly on their control screens. Inspectors auditing a pulsed GMAW WPS must ensure the procedure documents Instantaneous Energy per Unit Length rather than invalid meter averages.

  • 3. Step-by-Step Worked Heat Input Calculations
  • Calculation Scenario 1: Heavy-Wall SMAW Procedure

Welding Parameters:

  • Electrode: AWS E7018 ( 5 / 32 in. 5/32\text{ in.} 5/32 in. diameter)
  • Volts ( E E E ): 24 V 24\text{ V} 24 V
  • Amperes ( I I I ): 165 A 165\text{ A} 165 A
  • Travel Speed ( S S S ): 5.5 in/min 5.5\text{ in/min} 5.5 in/min

Calculation: H = 24 × 165 × 60 1000 × 5.5 = 237 , 600 5 , 500 = 43.2 kJ/in ( 1.70 kJ/mm ) H = \frac{24 \times 165 \times 60}{1000 \times 5.5} = \frac{237,600}{5,500} = 43.2\text{ kJ/in} \quad (1.70\text{ kJ/mm}) H = 1000 × 5.5 24 × 165 × 60 ​ = 5 , 500 237 , 600 ​ = 43.2 kJ/in ( 1.70 kJ/mm )

Calculation Scenario 2: High-Deposition Submerged Arc Welding (SAW)

Welding Parameters:

  • Wire: AWS EM12K ( 5 / 32 in. 5/32\text{ in.} 5/32 in. single wire)
  • Volts ( E E E ): 32 V 32\text{ V} 32 V
  • Amperes ( I I I ): 550 A 550\text{ A} 550 A
  • Travel Speed ( S S S ): 18 in/min 18\text{ in/min} 18 in/min

Calculation: H = 32 × 550 × 60 1000 × 18 = 1 , 056 , 000 18 , 000 = 58.67 kJ/in ( 2.31 kJ/mm ) H = \frac{32 \times 550 \times 60}{1000 \times 18} = \frac{1,056,000}{18,000} = 58.67\text{ kJ/in} \quad (2.31\text{ kJ/mm}) H = 1000 × 18 32 × 550 × 60 ​ = 18 , 000 1 , 056 , 000 ​ = 58.67 kJ/in ( 2.31 kJ/mm )

Calculation Scenario 3: Waveform-Controlled Pulsed GMAW (QW-409.1(c))

Welding Parameters:

Process: GMAW-P on API 5L X70 pipe

Total Energy Displayed on Machine Screen: 184 , 000 J 184,000\text{ J} 184 , 000 J ( 184 kJ 184\text{ kJ} 184 kJ )

Length of Deposited Bead ( L L L ): 6.25 in. 6.25\text{ in.} 6.25 in.

Calculation: H = 184 kJ 6.25 in. = 29.44 kJ/in ( 1.16 kJ/mm ) H = \frac{184\text{ kJ}}{6.25\text{ in.}} = 29.44\text{ kJ/in} \quad (1.16\text{ kJ/mm}) H = 6.25 in. 184 kJ ​ = 29.44 kJ/in ( 1.16 kJ/mm )

4. Metallurgical Impact: Why Heat Input is a Supplementary Essential Variable

Under Table QW-253 (SMAW), Table QW-255 (GMAW/FCAW), and Table QW-258 (SAW), paragraph QW-409.1 is classified as a Supplementary Essential Variable . It is legally binding only when the referencing construction code (ASME Section VIII Div 1/2, ASME B31.3 low-temperature, Section III) requires Charpy V-notch notch-toughness testing .

The t 8 / 5 t_{8/5} t 8/5 ​ Thermal Cooling Cycle

Heat input directly governs the thermal cooling cycle of the weldment, quantified universally in physical metallurgy as t 8 / 5 t_{8/5} t 8/5 ​ —the time required for the weld deposit and heat-affected zone (HAZ) to cool from 800 ∘ C 800^\circ\text{C} 80 0 ∘ C down to 500 ∘ C 500^\circ\text{C} 50 0 ∘ C ( 1472 ∘ F 1472^\circ\text{F} 147 2 ∘ F to 932 ∘ F 932^\circ\text{F} 93 2 ∘ F ). +----------------------------------------------------------------------------------------------------+

  • | THE HEAT INPUT / COOLING RATE DUALITY |
  • +----------------------------------------------------------------------------------------------------+
  • | HIGH HEAT INPUT (Slow Cooling / Long t8/5) | LOW HEAT INPUT (Fast Quenching / Short t8/5) |
  • +--------------------------------------------------------+-------------------------------------------+
  • | Prolonged time at elevated austenitizing temperatures | Extremely rapid extraction of heat into plate |
  • | Massive prior-austenite grain growth in CGHAZ | Martensitic transformation in hardenable steels |
  • | Decomposition into coarse upper bainite & Widmanstätten| Peak HAZ hardness increases (> 350 - 450 HV) |
  • | Catastrophic drop in Charpy V-notch impact toughness | Extreme susceptibility to Hydrogen-Induced |
  • | Shift of Transition Temp (DBTT) to warmer temperatures | Cracking (HIC) / Underbead Cold Cracking |

+----------------------------------------------------------------------------------------------------+ Temperature (°C)

  • |
  • 800 |---------+--------------------+
  • | | High Heat Input |
  • | | (Long t_8/5) | \ <-- Slow cooling creates coarse grains
  • | | | \ and poor impact toughness
  • 500 |---------|--------------------+---\--------
  • | | Low Heat Input | \
  • | | (Short t_8/5) | \
  • | | \ | \
  • | | \ <-- Fast cooling| \
  • +---------+--------------------+---------------- Time (seconds)
  • The QW-409.1 Supplementary Essential Rule

When toughness testing applies:

"An increase in heat input or an increase in volume of weld metal deposited per unit length over that qualified is a supplementary essential variable."

If the PQR coupon was welded with a calculated heat input of 45.0 kJ/in 45.0\text{ kJ/in} 45.0 kJ/in , the production WPS is strictly capped at a maximum heat input of 45.0 kJ/in 45.0\text{ kJ/in} 45.0 kJ/in . Welding in production at 52.0 kJ/in 52.0\text{ kJ/in} 52.0 kJ/in invalidates the procedure, as higher heat input degrades notch toughness below the certified PQR value!

5. Shielding Gas Chemistry & QW-408 Variables

Shielding gas isolates the superheated molten droplet and puddle from atmospheric gases (air is ≈ 78 % N 2 , 21 % O 2 \approx 78\%\text{ N}_2, 21\%\text{ O}_2 ≈ 78% N 2 ​ , 21% O 2 ​ ). Absorbed nitrogen causes severe embrittlement and porosity; absorbed oxygen causes silicon and manganese burn-out and slag inclusion formation.

The Gas Trio: Argon, Helium, and Carbon Dioxide

Argon ( A r Ar A r ): Monoatomic inert gas with low ionization potential ( 15.7 eV 15.7\text{ eV} 15.7 eV ). Easily establishes and stabilizes the arc. Promotes axial spray transfer with a deep, narrow central penetration finger.

Helium ( H e He He ): Monoatomic inert gas with high ionization potential ( 24.5 eV 24.5\text{ eV} 24.5 eV ) and very high thermal conductivity. Operates at higher arc voltages, producing a broad, deep, parabolic penetration profile. Ideal for heavy aluminum, copper, and nickel alloys.

Carbon Dioxide ( C O 2 CO_2 C O 2 ​ ): Active diatomic gas. Under arc temperatures, it dissociates into carbon monoxide and oxygen ( 2 CO 2 ⇌ 2 CO + O 2 2\text{CO}_2 \rightleftharpoons 2\text{CO} + \text{O}_2 2 CO 2 ​ ⇌ 2 CO + O 2 ​ ), creating an oxidizing arc atmosphere. Delivers broad sidewall penetration, prevents undercut, but causes heavy spatter in globular mode.

The QW-408.2 Shielding Gas Threshold

Under paragraph QW-408.2 , an essential variable requiring requalification is triggered whenever:

A single gas is substituted for another (e.g., 100 % CO 2 100\%\text{ CO}_2 100% CO 2 ​ replaced with 100 % Ar 100\%\text{ Ar} 100% Ar ).

A mixture is substituted for a single gas (or vice versa).

The nominal percentage of any gas component in a mixture changes by more than 5 % 5\% 5% . +----------------------------------------------------------------------------------------------------+

  • | EVALUATING QW-408.2 GAS BLEND AUDITS |
  • +----------------------------------------------------------------------------------------------------+
  • | QUALIFIED GAS MIXTURE | PROPOSED REVISION | CODE ANALYSIS |
  • +-------------------------------+-------------------------------+------------------------------------+
  • | 75% Ar / 25% CO2 | 82% Ar / 18% CO2 | Ar +7%, CO2 -7% -> EXCEEDS 5% |
  • | | | REQUALIFICATION REQUIRED |
  • | 90% He / 7.5% Ar / 2.5% CO2 | 88% He / 8.0% Ar / 4.0% CO2 | He -2%, Ar +0.5%, CO2 +1.5% |
  • | | | All shifts <= 5% -> PERMITTED |
  • +----------------------------------------------------------------------------------------------------+
  • 6. Backing Gas Purging Requirements & Oxygen Thresholds (QW-408.5 & QW-408.8)

In open-root piping welds for stainless steels (P-No. 8), nickel alloys (P-No. 4X), and duplex steels, the back side of the joint must be flooded with an inert backing gas purge (typically high-purity argon).

The Coking/Sugaring Phenomenon

If stainless steel root passes are welded without an adequate purge, atmospheric oxygen oxidizes chromium at elevated temperatures, forming heavy, black, porous chromium oxide crusts known colloquially as "sugaring" or "coking" . This depletes chromium from the surrounding matrix, completely destroying local corrosion resistance (pitting and intergranular attack).

Purging Oxygen Limits and Flow Monitoring

In high-purity biopharmaceutical and chemical process piping (ASME B31.3 high purity and severe cyclic), the internal oxygen concentration must be measured with an optical or electrochemical oxygen analyzer and reduced to < 50 ppm < 50\text{ ppm} < 50 ppm (or < 0.005 % < 0.005\% < 0.005% ) before striking the arc.

Code Variable Status: Under QW-408.5 and QW-408.8, the deletion of backing gas , or any decrease in backing gas flow rate, is an essential variable .

7. Trailing Shields for Reactive and Refractory Metals (QW-408.10)

Reactive metals—specifically Titanium (P-No. 51, 52, 53) and Zirconium (P-No. 61, 62) —exhibit an intense chemical affinity for atmospheric gases at elevated temperatures.

The 800°F (427°C) Embrittlement Threshold

Above 800 ∘ F 800^\circ\text{F} 80 0 ∘ F ( 427 ∘ C 427^\circ\text{C} 42 7 ∘ C ), titanium aggressively dissolves oxygen, nitrogen, and hydrogen as interstitial solid solutions. These interstitial atoms lock the titanium crystal lattice, destroying tensile ductility and causing catastrophic spontaneous cracking. Standard torch shielding cups protect only the immediate molten puddle, exposing the hot, newly solidified bead trailing behind the torch to atmospheric contamination.

Trailing Shield Mechanics

A trailing shield is a specialized secondary gas manifold mounted directly behind the welding torch. It blankets the cooling weldment with laminar, high-purity argon until its surface temperature drops safely below 800 ∘ F 800^\circ\text{F} 80 0 ∘ F ( 427 ∘ C 427^\circ\text{C} 42 7 ∘ C ). +----------------------------------------------------------------------------------------------------+

  • | TRAILING SHIELD SCHEMATIC (QW-408.10) |
  • +----------------------------------------------------------------------------------------------------+
  • | [Welding Torch] ----> [Primary Shield Gas] ----> (Liquid Puddle: T > 3000°F) |
  • | | |
  • | v (Follows Torch Travel) |
  • | [Attached Trailing Shield Manifold] ----> [Secondary Argon Blanket] |
  • | | |
  • | v |
  • | (Solidified Hot Weld Bead Protected Until T < 800°F / 427°C) |
  • +----------------------------------------------------------------------------------------------------+
  • Surface Discoloration as an Inspection Tool for Reactive Metals

Inspectors assess the effectiveness of trailing shields visually by observing the oxide interference color of the titanium weld bead:

Bright Silver: Perfect shielding; zero interstitial contamination.

Light Straw / Golden: Minor surface oxidation; acceptable under most aerospace and chemical piping codes.

Dark Blue / Purple: Moderate contamination; indicates failing trailing shield; frequently rejectable in structural service.

Gray / White Powdery Flakes: Complete atmospheric contamination; heavily embrittled; mandatory cut-out and reject.

Paragraph QW-408.10: Essential Variable Mandate

"For titanium and zirconium alloys, the deletion of a trailing shielding gas, or a change in the trailing gas composition, is an essential variable."

Loading diagram... Figure 8.3: Heat Input, Cooling Kinetics, and HAZ Microstructure