Study guide

2.3 Cyclically Loaded Structures, Stress Categories & Fatigue Life Design

AWS D1.1 Structural Steel Endorsement Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Structure, Code Scope & General Requirements

1.1 AWS D1.1 Endorsement Exam Format & Open-Book Navigation 1.2 Clause 1 Scope, Responsibilities & Structural Classifications 1.3 Normative References, Terminology & Base Metal Scope

2 Chapter 2: Design of Welded Connections (Clause 4)

2.1 Groove and Fillet Weld Design & Effective Throat Calculations 2.2 Statically Loaded Connection Details, Geometry Limits & Transitions 2.3 Cyclically Loaded Structures, Stress Categories & Fatigue Life Design

3 Chapter 3: Prequalification of Welding Procedure Specifications (Clause 5)

3.1 Prequalified Processes, Base Metal Groups & Matching Filler Metals 3.2 Prequalified Joint Geometries, CJP/PJP Details & Backing 3.3 Prequalified Minimum Fillet Sizes & Preheat/Interpass Temperatures

4 Chapter 4: Welding Procedure Specification (WPS) Qualification (Clause 6, Part B)

4.1 WPS Qualification Requirements, PQR Coupon Testing & Mechanical Evaluation 4.2 PQR Mechanical Test Types: Tension, Guided Bend & Macroetch 4.3 WPS Essential Variables, Base Metal Ranges & Qualified Positions (Table 6.6)

5 Chapter 5: Welder, Welding Operator & Tack Welder Performance Qualification (Clause 6, Part C)

5.1 Welder Qualification Test Plates, Positions & Pipe Assemblies 5.2 Performance Test Evaluation (Visual, Guided Bend, Macroetch) & Retest Rules 5.3 Performance Essential Variables, Qualification Limits (Table 6.12) & Continuity

6 Chapter 6: Fabrication & Workmanship (Clause 7)

6.1 Base Metal Preparation, Thermal Cutting Tolerances & Fit-Up 6.2 Welding Consumable Storage, Low-Hydrogen Exposure Limits & Baking 6.3 Distortion Control, Arc Strikes, Tack Welds & Weld Repair Rules

7 Chapter 7: Visual Inspection & Acceptance Criteria (Clause 8, Parts A-C)

7.1 Inspector Responsibilities, Qualifications (CWI/SCWI) & Inspection Sequence 7.2 Table 8.1 Visual Inspection Criteria: Static vs. Cyclic Non-Tubular Connections 7.3 Weld Profiles, Undercut Tolerances, Porosity Limits & Crack Rejection

8 Chapter 8: Nondestructive Testing (NDT) Procedures & Acceptance (Clause 8, Part D)

8.1 Radiographic Testing (RT) Requirements, IQI Placement & Acceptance 8.2 Ultrasonic Testing (UT) Procedures, Calibration & Tables 8.2 / 8.3 8.3 Magnetic Particle (MT), Liquid Penetrant (PT) & Inspection Records

9 Chapter 9: Stud Welding & Tubular Structures (Clauses 9 & 10)

9.1 Clause 9 Stud Welding: Pre-Production Testing, Bend Tests & Flash Acceptance 9.2 Clause 10 Tubular Connections: T-, Y-, K-Joints, Geometry & Effective Throat 9.3 Clause 10 Tubular Qualification & Inspection: 6GR Restriction Testing & Acceptance

10 Chapter 10: Strengthening/Repair of Existing Structures & Welding Symbols (Clause 11 & AWS A2.4)

10.1 Clause 11 Evaluation, Base Metal Identification & Welding Under Load 10.2 Clause 11 Repair Workmanship, Heat Input Control & Member Restoration 10.3 AWS A2.4 Welding Symbols: Notation, Sizing, Pitch & Field Flags

2.3 Cyclically Loaded Structures, Stress Categories & Fatigue Life Design

Key Takeaways Explain This Topic AI

Fatigue design under Clause 4 Part C evaluates the applied stress range (algebraic difference between maximum and minimum stress) rather than peak static yield strength.

Stress Categories (A through F) classify structural details by notch severity, where Category A represents plain base metal (FTH = 24 ksi [165 MPa]) and Category E' represents severe cover plate terminations (FTH = 2.6 ksi [18 MPa]).

The constant amplitude fatigue threshold (FTH) defines the critical stress range below which infinite fatigue life occurs without fatigue crack propagation.

Thickness transitions in cyclic butt joints require a slope not steeper than 1:2.5 (22°), and flange width transitions require a smooth radius of at least 2 ft [600 mm].

Intermittent fillet welds and plug/slot welds are strictly prohibited on structural members subjected to cyclic tensile stresses due to severe stress concentration at weld terminations.

Last updated: August 2026

2.3 Cyclically Loaded Structures, Stress Categories & Fatigue Life Design

Quick Answer: Under AWS D1.1:2025 Clause 4 Part C , members subjected to repeated cyclic loading (bridges, crane runway girders, offshore platforms) are designed against fatigue crack growth . Fatigue life is governed by the stress range ( Δ σ \Delta \sigma Δ σ or S r S_r S r ​ ) and the Stress Category (A, B, B', C, D, E, E', F) per Table 4.5 . The allowable stress range is calculated as F s r = ( C f / N ) 0.333 ≥ F T H F_{sr} = (C_f / N)^{0.333} \ge F_{TH} F sr ​ = ( C f ​ / N ) 0.333 ≥ F T H ​ . Thickness transitions in cyclic butt joints require a taper slope not steeper than 1 : 2.5 1:2.5 1 : 2.5 ( 22 ∘ 22^\circ 2 2 ∘ ), and flange width transitions require a 2 ft 2\text{ ft} 2 ft [ 600 mm 600\text{ mm} 600 mm ] minimum radius . Intermittent fillet welds and plug/slot welds are strictly prohibited on members carrying cyclic tension.

Fatigue is the progressive structural deterioration that occurs when a member is subjected to repeated fluctuations of stress. Because welded joints inherently contain micro-discontinuities and geometric reentrant corners, fatigue cracks initiate at weld toes or roots at stress levels far below the static yield strength ( F y F_y F y ​ ) of the base metal. Fatigue strength is independent of steel yield strength—Grade 36 and Grade 100 steels exhibit virtually identical fatigue crack growth rates.

Fatigue Fundamentals & Stress Range Dynamics (Clause 4 Part C)

Fatigue analysis in structural welding focuses entirely on the stress range experienced during service life cycles ( N N N ):

Stress Range ( Δ σ \Delta \sigma Δ σ or S r S_r S r ​ ): The algebraic difference between the maximum stress ( σ m a x \sigma_{max} σ ma x ​ ) and the minimum stress ( σ m i n \sigma_{min} σ min ​ ) across a loading cycle: Δ σ = σ m a x − σ m i n \Delta \sigma = \sigma_{max} - \sigma_{min} Δ σ = σ ma x ​ − σ min ​

Stress Reversal: When stress fluctuates from tension ( + + + ) to compression ( − - − ), the stress range is the arithmetic sum of the absolute peak values: Δ σ = ∣ σ t e n s i o n ∣ + ∣ σ c o m p r e s s i o n ∣ \Delta \sigma = |\sigma_{tension}| + |\sigma_{compression}| Δ σ = ∣ σ t e n s i o n ​ ∣ + ∣ σ co m p ress i o n ​ ∣

Design Life Cycles ( N N N ): Standard fatigue design evaluates cycle loading regimes ranging from 20 , 000 20,000 20 , 000 cycles (low-cycle equipment) to over 2 , 000 , 000 2,000,000 2 , 000 , 000 cycles (high-cycle bridges and overhead crane girders).

Allowable Stress Range Formulation (Clause 4.17)

The allowable fatigue stress range ( F s r F_{sr} F sr ​ ) is governed by the structural detail constant ( C f C_f C f ​ ), the number of design cycles ( N N N ), and the constant amplitude fatigue threshold ( F T H F_{TH} F T H ​ ) : F s r = ( C f N ) 0.333 ≥ F T H F_{sr} = \left( \frac{C_f}{N} \right)^{0.333} \ge F_{TH} F sr ​ = ( N C f ​ ​ ) 0.333 ≥ F T H ​

Fatigue Threshold ( F T H F_{TH} F T H ​ ): The endurance limit below which no fatigue crack propagation occurs. If all operational cyclic stress ranges are less than F T H F_{TH} F T H ​ , the joint exhibits infinite fatigue life .

Detail Stress Categories & Structural Classifications (Table 4.5 & Figure 4.16)

AWS D1.1 classifies welded and non-welded details into discrete Stress Categories based on geometric severity, stress flow disturbance, and weld orientation:

Master Guide to AWS D1.1 Fatigue Stress Categories (Table 4.5)

Stress Category Structural Detail Description Constant C f × 10 8 C_f \times 10^8 C f ​ × 1 0 8 Threshold F T H F_{TH} F T H ​ (ksi) Threshold F T H F_{TH} F T H ​ (MPa)

Category A Base metal with clean rolled mill surfaces, flame-cut edges ( R a ≤ 1000 μ in. R_a \le 1000\,\mu\text{in.} R a ​ ≤ 1000 μ in. ), no weld attachments 250.0 250.0 250.0 24.0 ksi 24.0\text{ ksi} 24.0 ksi 165 MPa 165\text{ MPa} 165 MPa

Category B Longitudinal continuous CJP groove welds; transverse CJP butt joints with weld reinforcement ground flush and 100 % 100\% 100% NDT 120.0 120.0 120.0 16.0 ksi 16.0\text{ ksi} 16.0 ksi 110 MPa 110\text{ MPa} 110 MPa

Category B' Longitudinal continuous fillet welds; longitudinal PJP groove welds; CJP welds with backing bars left in place parallel to stress 61.0 61.0 61.0 12.0 ksi 12.0\text{ ksi} 12.0 ksi 83 MPa 83\text{ MPa} 83 MPa

Category C Transverse CJP butt welds with weld reinforcement intact; transverse full-penetration T-joints with reinforcing fillets 44.0 44.0 44.0 10.0 ksi 10.0\text{ ksi} 10.0 ksi 69 MPa 69\text{ MPa} 69 MPa

Category D Transverse CJP welds with backing left in place; longitudinal attachments with length 2.0 in. ≤ L ≤ 4.0 in. 2.0\text{ in.} \le L \le 4.0\text{ in.} 2.0 in. ≤ L ≤ 4.0 in. [ 50 – 100 mm 50\text{--}100\text{ mm} 50 – 100 mm ] 22.0 22.0 22.0 7.0 ksi 7.0\text{ ksi} 7.0 ksi 48 MPa 48\text{ MPa} 48 MPa

Category E Longitudinal attachments with length L > 4.0 in. L > 4.0\text{ in.} L > 4.0 in. [ 100 mm 100\text{ mm} 100 mm ]; wide cover plate terminations with end welds 11.0 11.0 11.0 4.5 ksi 4.5\text{ ksi} 4.5 ksi 31 MPa 31\text{ MPa} 31 MPa

Category E' Thick flange cover plate terminations ( t f > 0.8 in. t_f > 0.8\text{ in.} t f ​ > 0.8 in. [ 20 mm 20\text{ mm} 20 mm ]) without end welds; attachment thickness > 1.0 in. > 1.0\text{ in.} > 1.0 in. 3.9 3.9 3.9 2.6 ksi 2.6\text{ ksi} 2.6 ksi 18 MPa 18\text{ MPa} 18 MPa

Category F Shear stress on the effective throat of fillet welds, plug welds, or slot welds ( F s r = ( C f / N ) 0.167 ≥ F T H F_{sr} = (C_f/N)^{0.167} \ge F_{TH} F sr ​ = ( C f ​ / N ) 0.167 ≥ F T H ​ ) 150.0 150.0 150.0 8.0 ksi 8.0\text{ ksi} 8.0 ksi 55 MPa 55\text{ MPa} 55 MPa

Longitudinal Attachment Length Impact on Fatigue

Longitudinal attachments (gussets, brackets, stiffeners) welded parallel to the primary cyclic tensile stress field concentrate stress at their weld terminations:

Attachment length L < 2.0 in. L < 2.0\text{ in.} L < 2.0 in. [ 50 mm 50\text{ mm} 50 mm ]: Category C

Attachment length 2.0 in. ≤ L ≤ 4.0 in. 2.0\text{ in.} \le L \le 4.0\text{ in.} 2.0 in. ≤ L ≤ 4.0 in. [ 50 – 100 mm 50\text{--}100\text{ mm} 50 – 100 mm ]: Category D

  • Attachment length L > 4.0 in. L > 4.0\text{ in.} L > 4.0 in. [ 100 mm 100\text{ mm} 100 mm ]: Category E
  • Attachment thickness t > 1.0 in. t > 1.0\text{ in.} t > 1.0 in. [ 25 mm 25\text{ mm} 25 mm ]: Category E'
  • Worked Example: Allowable Fatigue Stress Range Calculation

Problem: An overhead crane girder connection detail is classified as Category C ( C f = 44 × 10 8 C_f = 44 \times 10^8 C f ​ = 44 × 1 0 8 , F T H = 10.0 ksi F_{TH} = 10.0\text{ ksi} F T H ​ = 10.0 ksi ). The bridge has an expected service life of N = 1 , 500 , 000 N = 1,500,000 N = 1 , 500 , 000 cycles. Calculate the allowable fatigue stress range ( F s r F_{sr} F sr ​ ).

Calculation:

Compute allowable stress range from formula: F s r = ( C f N ) 0.333 = ( 44 × 10 8 1.5 × 10 6 ) 0.333 = ( 2933.33 ) 0.333 ≈ 14.36 ksi [ 99.0 MPa ] F_{sr} = \left( \frac{C_f}{N} \right)^{0.333} = \left( \frac{44 \times 10^8}{1.5 \times 10^6} \right)^{0.333} = (2933.33)^{0.333} \approx 14.36\text{ ksi} \quad [99.0\text{ MPa}] F sr ​ = ( N C f ​ ​ ) 0.333 = ( 1.5 × 1 0 6 44 × 1 0 8 ​ ) 0.333 = ( 2933.33 ) 0.333 ≈ 14.36 ksi [ 99.0 MPa ]

Compare against threshold limit ( F T H F_{TH} F T H ​ ): F s r = 14.36 ksi ≥ F T H = 10.0 ksi F_{sr} = 14.36\text{ ksi} \ge F_{TH} = 10.0\text{ ksi} F sr ​ = 14.36 ksi ≥ F T H ​ = 10.0 ksi

Governing allowable stress range is F s r = 14.36 ksi F_{sr} = 14.36\text{ ksi} F sr ​ = 14.36 ksi . If cyclic service load induces a stress range Δ σ = 12.0 ksi \Delta \sigma = 12.0\text{ ksi} Δ σ = 12.0 ksi , the joint is structurally adequate for the intended life.

Geometry Transitions in Cyclically Loaded Spliced Members (Clause 4.18)

Abrupt changes in thickness or width create severe stress concentrations that drastically reduce fatigue category ratings. When joining members of different dimensions in cyclic tension:

Butt Joint Thickness Transitions (Clause 4.18 & Figure 4.17): When parts differ in thickness by more than 1 / 8 in. 1/8\text{ in.} 1/8 in. [ 3 mm 3\text{ mm} 3 mm ], the thicker part shall be tapered with a transition slope not steeper than 1 : 2.5 1:2.5 1 : 2.5 (an angle ≤ 22 ∘ \le 22^\circ ≤ 2 2 ∘ ). The chamfer may be formed by machining the base plate, tapering the weld surface, or a combination of both.

Flange Width Transitions (Clause 4.18 & Figure 4.18): When flange plates differ in width, the transition shall be provided by a smooth radius transition of not less than 2.0 ft 2.0\text{ ft} 2.0 ft [ 24 in. 24\text{ in.} 24 in. / 600 mm 600\text{ mm} 600 mm ] tangential to the narrower flange plate at the splice, providing a Category B fatigue detail. If a straight 1 : 2.5 1:2.5 1 : 2.5 taper is used instead of a radius, the detail is downgraded to Category D.

Prohibited Connection Details in Cyclically Loaded Members (Clause 4.19)

Due to severe fatigue notch sensitivity, Clause 4.19 strictly prohibits the following connection details on structural members or components subjected to cyclic tensile stresses:

Intermittent Fillet Welds: Strictly prohibited on members carrying cyclic tension. The start/stop crater of every segment creates an intolerable stress concentration.

Plug and Slot Welds: Prohibited in joints subjected to cyclic tensile stresses.

Left-in-Place Transverse Steel Backing: Steel backing bars oriented perpendicular to the direction of cyclic tension act as sharp built-in cracks (Category D or E). Backing must be removed, backgouged, backwelded, and ground smooth for Category B performance.

Uncontrolled Tack Welds: Tack welds outside the weld groove that are not incorporated into final welds are prohibited on tension flanges. Stray arc strikes create microscopic quenched martensitic cracks that initiate immediate fatigue failure.

Temporary Attachments: Lifting lugs, strongbacks, and fit-up clips welded to tension flanges must be removed by cutting at least 1 / 8 in. 1/8\text{ in.} 1/8 in. [ 3 mm 3\text{ mm} 3 mm ] away from the plate surface, followed by grinding flush and mandatory Magnetic Particle (MT) or Liquid Penetrant (PT) non-destructive examination.