Study guide
5.2 Construction Contract Terms & Provisions
Arizona General Contractor Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Overview
1.1 Current Exam Facts 1.2 The Arizona Contractor Licensing Path 1.3 How to Use This Guide & Study Plan
2 Chapter 2: Arizona ROC & Licensing Law
2.1 The Arizona Registrar of Contractors 2.2 License Classifications 2.3 Qualifying Party & Experience Requirements 2.4 Application, Fees, Bond & Background Check 2.5 License Bonds, Cash Deposits & Bond Claims 2.6 Unlicensed Contracting: Penalties & Lost Remedies 2.7 Advertising Rules, Contract Disclosures & Workmanship Standards
3 Chapter 3: The Exams — SRE, Trade & NASCLA
3.1 The Statutes & Rules Exam (SRE) 3.2 The PSI Trade Exam 3.3 The NASCLA Commercial General Building Exam Option
4 Chapter 4: License Maintenance, Recovery Fund & Discipline
4.1 License Renewal & Continuing Education 4.2 The Residential Contractors' Recovery Fund 4.3 ROC Disciplinary Actions & Penalties
5 Chapter 5: Contract Law & Disputes
5.1 Arizona Contract Fundamentals 5.2 Construction Contract Terms & Provisions 5.3 Change Orders & Modifications 5.4 Dispute Resolution & ROC Complaints 5.5 The Arizona Prompt Payment Act
6 Chapter 6: Liens, Bonds & Insurance
6.1 Arizona Mechanics' Lien Law Overview 6.2 Lien Notices, Recording & Deadlines 6.3 Contract Bonds: Bid, Performance & Payment 6.4 Insurance Requirements
7 Chapter 7: Financial Management & Taxes
7.1 Accounting & Financial Statements 7.2 Estimating, Bidding & Markup 7.3 Taxes & Payroll
8 Chapter 8: Project Management
8.1 Scheduling & the Critical Path Method 8.2 Supervision, Subcontractors & Quality Control 8.3 Project Documentation & Closeout
9 Chapter 9: Safety & OSHA
9.1 OSHA Construction Standards Overview 9.2 Fall Protection, Scaffolds & Ladders 9.3 Excavation, Trenching & Electrical Safety 9.4 Heat Illness Prevention & Arizona Job-Site Hazards
10 Chapter 10: Building Codes, Permits & Plan Reading
10.1 IRC 2018 & IBC 2018 Fundamentals 10.2 Permits, Plan Review & Inspections 10.3 Energy Code & Accessibility 10.4 Reading Construction Drawings & Specifications 10.5 Means of Egress & Fire-Resistance-Rated Construction
11 Chapter 11: Sitework, Concrete & Masonry
11.1 Sitework: Surveying, Excavation & Grading 11.2 Concrete: Formwork, Reinforcement & Placing 11.3 Masonry: Brick, Block & Mortar 11.4 Soils, Compaction & Earthwork Testing 11.5 Concrete Materials & Mix Design 11.6 Concrete Curing, Joints, Testing & Defects 11.7 Masonry Reinforcement, Grouting & Wall Systems
12 Chapter 12: Carpentry, Metals & Building Envelope
12.1 Carpentry & Framing 12.2 Metals & Metal Framing 12.3 Thermal & Moisture Protection 12.4 Doors, Windows & Finishes 12.5 Engineered Wood, Trusses & Connectors 12.6 Structural Steel Erection & Connections 12.7 Steel Joists, Girders & Metal Deck
13 Chapter 13: Roofing, Waterproofing & Interior Finishes
13.1 Roofing Systems 13.2 Waterproofing, Flashing & Sealants 13.3 Interior Finishes: Gypsum, Stucco, Flooring & Paint
14 Chapter 14: Building Systems for the General Contractor
14.1 Mechanical & Plumbing Systems 14.2 Electrical Systems & Temporary Power
5.2 Construction Contract Terms & Provisions
Key Takeaways Explain This Topic AI
Core construction contract provisions include scope of work, payment terms, time for performance, warranties, indemnification, termination, and dispute resolution
AIA-style contracts are the most widely used standard form documents in the U.S. construction industry
Arizona requires contractors to include their ROC license number on contracts, bids, and advertising
Subcontractor agreements should incorporate the general contract by reference and define flow-down obligations clearly
Indemnification clauses shift risk but cannot indemnify against intentional misconduct or violations of Arizona law
Last updated: August 2026
Core Contract Provisions
Quick Answer: A well-drafted Arizona construction contract should address, at minimum: scope of work , payment terms , time for performance , warranties , indemnification , termination , and a dispute resolution clause.
Construction contracts range from short proposals to lengthy standard-form documents, but nearly all contain the following core provisions.
- Clause Purpose Key Risk if Missing
- Scope of Work Defines exactly what the contractor will build or repair Scope creep; payment disputes
Payment Terms Sets contract price, progress payments, retainage, and final payment terms Cash-flow problems; lien disputes
Time for Performance Sets start date, milestones, and substantial completion date Schedule disputes; delay claims
- Warranties Promises about workmanship and materials Defect claims without clear standard
- Indemnification Shifts risk of third-party claims from one party to another Unallocated liability for injuries
- Termination Defines when and how a party may end the contract Wrongful termination claims
- Dispute Resolution Specifies negotiation, mediation, arbitration, or litigation Forum and cost uncertainty
- Scope of Work
The scope of work is the heart of any construction contract. It should describe the work in enough detail that a third party could understand what is included and what is excluded. Vague scopes — "build a deck" with no dimensions, materials, or finishes — invite change-order disputes and payment fights. Best practice ties the scope to plans, specifications, and applicable codes (the 2018 IRC for residential B work, or the 2018 IBC for commercial B-1/B-2 work).
Payment Terms
Payment terms should state the contract price (lump sum, unit price, or time and materials), progress payment schedule, retainage percentage, and conditions for final payment. Arizona does not mandate a specific retainage rate for private work, but retainage typically runs 5–10%. Contractors should also address Arizona Transaction Privilege Tax (TPT) — an Arizona tax on contracting activity paid by the seller/contractor, not the customer — when pricing the work.
Time for Performance
The time for performance clause sets the start date, milestones, and substantial completion date. It should address excusable delays (weather, owner changes, force majeure) and the consequences of non-excusable delay, including liquidated damages if the parties agree to a per-day amount.
Warranties
Construction contracts typically include a workmanship warranty (the contractor will repair defective work for a defined period) and pass through manufacturer warranties on materials. Arizona's ROC framework also imposes statutory obligations on licensees to perform work in a workmanlike manner, separate from any contractual warranty.
Indemnification
Indemnification clauses require one party to defend and hold harmless the other from third-party claims. In Arizona, indemnity provisions are generally enforceable but cannot require a party to indemnify against its own intentional misconduct or violations of law. Contractors should read indemnity clauses carefully — broad-form indemnity can shift significant risk.
Termination
Termination provisions distinguish between termination for cause (breach) and termination for convenience. The clause should specify notice requirements, payment for work performed, and the contractor's right to retrieve tools and materials.
Dispute Resolution Clause
A well-drafted dispute resolution clause sets the path for resolving disagreements: typically negotiation, then mediation, then arbitration or litigation. Specifying the forum (Arizona state court, federal court, or an arbitration provider) avoids later fights over where to file.
AIA-Style Contracts
The American Institute of Architects (AIA) publishes the most widely used standard-form construction contracts in the United States. Common AIA documents include:
- A101 — Standard Agreement between Owner and Contractor (Lump Sum)
- A102 — Standard Agreement between Owner and Contractor (Cost of Work Plus Fee)
- A201 — General Conditions of the Contract for Construction
- A401 — Standard Agreement between Contractor and Subcontractor
AIA's A201 General Conditions is the backbone document: it defines the roles of owner, contractor, and architect, and addresses changes, claims, time, payment, and dispute resolution. Many non-AIA contracts borrow A201's structure. Contractors should review A201 before signing any AIA-based contract.
Arizona-Specific Notice Provisions
Several Arizona notice rules shape contract performance:
License number disclosure — A licensed contractor must include the ROC license number on contracts, bids, and advertising
Preliminary 20-day notice (A.R.S. § 33-992.01) — A subcontractor or supplier not in direct contract with the owner must serve this notice within 20 days of first furnishing labor or materials to preserve mechanics' lien rights
- Notice of completion — Owners may record a notice of completion, which affects lien deadlines
- Subcontractor Agreements
A subcontractor agreement between the general contractor and a subcontractor should:
Incorporate the general contract by reference so the subcontractor is bound to the owner-contractor agreement's terms as they apply to the subcontractor's scope (the "flow-down" provision)
Define the scope of the subcontractor's work clearly
Set payment terms that track the general contractor's receipt of payment from the owner ("pay-when-paid" or "pay-if-paid" clauses, which Arizona courts interpret closely)
- Require insurance and licensing appropriate to the subcontractor's trade
- Address changes through the same written change-order process used in the prime contract
A clear subcontract agreement prevents the most common disputes: scope overlaps, payment delays, and mismatched change-order procedures.