Study guide
2.7 Advertising Rules, Contract Disclosures & Workmanship Standards
Arizona General Contractor Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Overview
1.1 Current Exam Facts 1.2 The Arizona Contractor Licensing Path 1.3 How to Use This Guide & Study Plan
2 Chapter 2: Arizona ROC & Licensing Law
2.1 The Arizona Registrar of Contractors 2.2 License Classifications 2.3 Qualifying Party & Experience Requirements 2.4 Application, Fees, Bond & Background Check 2.5 License Bonds, Cash Deposits & Bond Claims 2.6 Unlicensed Contracting: Penalties & Lost Remedies 2.7 Advertising Rules, Contract Disclosures & Workmanship Standards
3 Chapter 3: The Exams — SRE, Trade & NASCLA
3.1 The Statutes & Rules Exam (SRE) 3.2 The PSI Trade Exam 3.3 The NASCLA Commercial General Building Exam Option
4 Chapter 4: License Maintenance, Recovery Fund & Discipline
4.1 License Renewal & Continuing Education 4.2 The Residential Contractors' Recovery Fund 4.3 ROC Disciplinary Actions & Penalties
5 Chapter 5: Contract Law & Disputes
5.1 Arizona Contract Fundamentals 5.2 Construction Contract Terms & Provisions 5.3 Change Orders & Modifications 5.4 Dispute Resolution & ROC Complaints 5.5 The Arizona Prompt Payment Act
6 Chapter 6: Liens, Bonds & Insurance
6.1 Arizona Mechanics' Lien Law Overview 6.2 Lien Notices, Recording & Deadlines 6.3 Contract Bonds: Bid, Performance & Payment 6.4 Insurance Requirements
7 Chapter 7: Financial Management & Taxes
7.1 Accounting & Financial Statements 7.2 Estimating, Bidding & Markup 7.3 Taxes & Payroll
8 Chapter 8: Project Management
8.1 Scheduling & the Critical Path Method 8.2 Supervision, Subcontractors & Quality Control 8.3 Project Documentation & Closeout
9 Chapter 9: Safety & OSHA
9.1 OSHA Construction Standards Overview 9.2 Fall Protection, Scaffolds & Ladders 9.3 Excavation, Trenching & Electrical Safety 9.4 Heat Illness Prevention & Arizona Job-Site Hazards
10 Chapter 10: Building Codes, Permits & Plan Reading
10.1 IRC 2018 & IBC 2018 Fundamentals 10.2 Permits, Plan Review & Inspections 10.3 Energy Code & Accessibility 10.4 Reading Construction Drawings & Specifications 10.5 Means of Egress & Fire-Resistance-Rated Construction
11 Chapter 11: Sitework, Concrete & Masonry
11.1 Sitework: Surveying, Excavation & Grading 11.2 Concrete: Formwork, Reinforcement & Placing 11.3 Masonry: Brick, Block & Mortar 11.4 Soils, Compaction & Earthwork Testing 11.5 Concrete Materials & Mix Design 11.6 Concrete Curing, Joints, Testing & Defects 11.7 Masonry Reinforcement, Grouting & Wall Systems
12 Chapter 12: Carpentry, Metals & Building Envelope
12.1 Carpentry & Framing 12.2 Metals & Metal Framing 12.3 Thermal & Moisture Protection 12.4 Doors, Windows & Finishes 12.5 Engineered Wood, Trusses & Connectors 12.6 Structural Steel Erection & Connections 12.7 Steel Joists, Girders & Metal Deck
13 Chapter 13: Roofing, Waterproofing & Interior Finishes
13.1 Roofing Systems 13.2 Waterproofing, Flashing & Sealants 13.3 Interior Finishes: Gypsum, Stucco, Flooring & Paint
14 Chapter 14: Building Systems for the General Contractor
14.1 Mechanical & Plumbing Systems 14.2 Electrical Systems & Temporary Power
2.7 Advertising Rules, Contract Disclosures & Workmanship Standards
Key Takeaways Explain This Topic AI
A.R.S. § 32-1124 requires the license number preceded by 'ROC' on jobsite postings, written bids and estimates, published advertising, letterheads, customer correspondence, and broadcast, internet, and billboard advertising
A posting violation is grounds for discipline under A.R.S. § 32-1154(A)(12), but it cannot void a contract or block a contract award
AZ ROC's published Arizona Workmanship Standards define what counts as defective work in a complaint investigation
AZ ROC publishes a Minimum Elements of a Contract list covering identification, scope, price, payment schedule, and change-order handling
Workmanship standards are enforced through the complaint process, so failing them exposes the license even when the customer never sues
Last updated: August 2026
Why Advertising Is a Licensing Topic
Quick Answer: A.R.S. § 32-1124 requires a licensee to display the license number, preceded by "ROC" , in a conspicuous place on premises where work is being performed, on all written bids and estimates, on published advertising, letterheads, and customer correspondence, and on all broadcast, internet, and billboard advertising. Violations are grounds for discipline under § 32-1154(A)(12) but cannot void a contract.
Consumers verify contractors by searching a license number. The statute exists so that the number is always in front of them: before they hire (advertising and bids), while the work runs (jobsite posting), and in every document that follows.
Where the Number Must Appear
- Location Requirement
- Jobsite In a conspicuous place on premises where any work is being performed
- Bids and estimates On all written bids and estimates submitted by the licensee
Print and correspondence On all published advertising, letterheads, and other documents used to correspond with customers or potential customers
Broadcast, internet, billboard On all such advertising, with limited exceptions for website links
The "ROC" prefix is part of the requirement, not decoration. "License #123456" does not satisfy the statute; "ROC 123456" does.
The Penalty Is Narrower Than You Would Guess
The statute is explicit that a posting violation is, at the Registrar's discretion, grounds for discipline under § 32-1154(A)(12) — "but not grounds for preventing the award of a contract, voiding an awarded contract, or any other claim or defense against the licensee."
That is a deliberate carve-out. A customer who discovers that your business card omitted the ROC number cannot use that omission to escape paying for a completed remodel. Compare this with § 32-1153, where being unlicensed is a total bar on collection. The lesson for the exam: being unlicensed destroys your claim; advertising sloppily only exposes your license.
Minimum Elements of a Contract
AZ ROC publishes a consumer-facing "Minimum Elements of a Contract" guide that doubles as a checklist for licensees. Its content tracks what an investigator will look for when a complaint lands:
Identification — the licensed business name exactly as registered, the ROC license number, address, and telephone number, plus the customer's name and the job address.
Scope of work — a description specific enough that a third party can tell what was and was not included, tied to plans and specifications where they exist.
Materials — brands, grades, models, and colors where they drive price or appearance.
Total price and payment schedule — the contract price, what triggers each progress payment, and the amount of any deposit.
Dates — approximate start and completion dates.
Change orders — how changes are priced, documented, and authorized before the work is performed.
Warranty — the workmanship warranty term and what it covers.
Signatures — of the licensed entity and the customer.
None of this is exotic, and that is the point. In a ROC complaint the contractor with a written, signed, specific contract is arguing about facts; the contractor with a one-line proposal is arguing about what the parties meant, and the Registrar's investigator resolves ambiguity against the professional.
The Arizona Workmanship Standards
When a homeowner complains that work is "bad," someone has to decide what "bad" means. AZ ROC answers that with its published Arizona Workmanship Standards — a set of minimum standards, organized by trade and building element, that ROC inspectors apply during complaint investigations.
The standards work by pairing a requirement with an observable defect. In outline:
Element Typical standard Typical cited defect
Concrete flatwork Surfaces drain away from the structure; cracking is controlled by jointing Ponding water; uncontrolled random cracking
Framing Members sized, spaced, and connected per code and plans Notched or bored members beyond code limits; missing connectors
Roofing Installed to the manufacturer's instructions and code Leaks; exposed fasteners; missing flashing at penetrations
Stucco and plaster Applied over correct lath and weather-resistive barrier in specified coat thicknesses Cracking beyond tolerance; missing weep screed
Interior finishes Level of finish and tolerances appropriate to the specified system Visible joints, ridging, or blisters in painted gypsum board
Grading and drainage Positive drainage away from the structure Water directed toward the foundation
Three things make these standards worth studying rather than skimming:
They are the enforcement yardstick. A complaint is sustained or dismissed against the standard, not against the homeowner's expectations or the contractor's opinion.
They set a floor, not a ceiling. A contract that promises better than the standard is enforced at the contract's level. The standard only tells you where "defective" begins.
Manufacturer instructions get pulled in. For roofing, stucco, and most manufactured assemblies, the installation instructions become the standard, which is why a valid warranty and a code-compliant installation usually stand or fall together.
Exam tip: questions in this area usually test the relationship between the documents rather than a specific tolerance. The order of authority is: the contract (if it promises more), then the adopted building code and manufacturer's instructions , then the ROC workmanship standards as the minimum.
Putting It Together
A licensee's exposure on any given job runs along three tracks at once, and the same facts can move on all three:
- Failure Consequence
- No ROC number on the bid Discipline under § 32-1154(A)(12); contract still enforceable
- Vague scope, no written change orders Weak position in a ROC complaint; likely corrective order
- Work below the workmanship standards Corrective order, citation, and possible bond or Recovery Fund claim
- Not licensed for the scope at all § 32-1164 misdemeanor plus the § 32-1153 collection bar
The administrative habits are cheap: put ROC # on everything, use a contract that carries AZ ROC's minimum elements, paper every change before performing it, and build to the published standard. The alternative is defending all four rows simultaneously.