Study guide
2.1 The Arizona Registrar of Contractors
Arizona General Contractor Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Overview
1.1 Current Exam Facts 1.2 The Arizona Contractor Licensing Path 1.3 How to Use This Guide & Study Plan
2 Chapter 2: Arizona ROC & Licensing Law
2.1 The Arizona Registrar of Contractors 2.2 License Classifications 2.3 Qualifying Party & Experience Requirements 2.4 Application, Fees, Bond & Background Check 2.5 License Bonds, Cash Deposits & Bond Claims 2.6 Unlicensed Contracting: Penalties & Lost Remedies 2.7 Advertising Rules, Contract Disclosures & Workmanship Standards
3 Chapter 3: The Exams — SRE, Trade & NASCLA
3.1 The Statutes & Rules Exam (SRE) 3.2 The PSI Trade Exam 3.3 The NASCLA Commercial General Building Exam Option
4 Chapter 4: License Maintenance, Recovery Fund & Discipline
4.1 License Renewal & Continuing Education 4.2 The Residential Contractors' Recovery Fund 4.3 ROC Disciplinary Actions & Penalties
5 Chapter 5: Contract Law & Disputes
5.1 Arizona Contract Fundamentals 5.2 Construction Contract Terms & Provisions 5.3 Change Orders & Modifications 5.4 Dispute Resolution & ROC Complaints 5.5 The Arizona Prompt Payment Act
6 Chapter 6: Liens, Bonds & Insurance
6.1 Arizona Mechanics' Lien Law Overview 6.2 Lien Notices, Recording & Deadlines 6.3 Contract Bonds: Bid, Performance & Payment 6.4 Insurance Requirements
7 Chapter 7: Financial Management & Taxes
7.1 Accounting & Financial Statements 7.2 Estimating, Bidding & Markup 7.3 Taxes & Payroll
8 Chapter 8: Project Management
8.1 Scheduling & the Critical Path Method 8.2 Supervision, Subcontractors & Quality Control 8.3 Project Documentation & Closeout
9 Chapter 9: Safety & OSHA
9.1 OSHA Construction Standards Overview 9.2 Fall Protection, Scaffolds & Ladders 9.3 Excavation, Trenching & Electrical Safety 9.4 Heat Illness Prevention & Arizona Job-Site Hazards
10 Chapter 10: Building Codes, Permits & Plan Reading
10.1 IRC 2018 & IBC 2018 Fundamentals 10.2 Permits, Plan Review & Inspections 10.3 Energy Code & Accessibility 10.4 Reading Construction Drawings & Specifications 10.5 Means of Egress & Fire-Resistance-Rated Construction
11 Chapter 11: Sitework, Concrete & Masonry
11.1 Sitework: Surveying, Excavation & Grading 11.2 Concrete: Formwork, Reinforcement & Placing 11.3 Masonry: Brick, Block & Mortar 11.4 Soils, Compaction & Earthwork Testing 11.5 Concrete Materials & Mix Design 11.6 Concrete Curing, Joints, Testing & Defects 11.7 Masonry Reinforcement, Grouting & Wall Systems
12 Chapter 12: Carpentry, Metals & Building Envelope
12.1 Carpentry & Framing 12.2 Metals & Metal Framing 12.3 Thermal & Moisture Protection 12.4 Doors, Windows & Finishes 12.5 Engineered Wood, Trusses & Connectors 12.6 Structural Steel Erection & Connections 12.7 Steel Joists, Girders & Metal Deck
13 Chapter 13: Roofing, Waterproofing & Interior Finishes
13.1 Roofing Systems 13.2 Waterproofing, Flashing & Sealants 13.3 Interior Finishes: Gypsum, Stucco, Flooring & Paint
14 Chapter 14: Building Systems for the General Contractor
14.1 Mechanical & Plumbing Systems 14.2 Electrical Systems & Temporary Power
2.1 The Arizona Registrar of Contractors
Key Takeaways Explain This Topic AI
The Arizona Registrar of Contractors (AZ ROC) regulates construction under A.R.S. Title 32, Chapter 10 and AAC Title 4, Chapter 9.
The ROC's three-part mission is to license contractors, investigate consumer complaints, and enforce contractor licensing law.
A contractor license is required when total project cost exceeds $1,000; smaller projects not requiring a permit are exempt.
Disciplinary categories include citations, fines, suspension, and revocation; specific fine amounts are not published.
The Statutes & Rules Exam (SRE) tests A.R.S. Title 32 Ch 10 and AAC Title 4 Ch 9 directly: $61, 70% pass, GMetrix online, item count not published.
Last updated: August 2026
What Is the Arizona Registrar of Contractors?
The Arizona Registrar of Contractors (AZ ROC) is the state agency that regulates Arizona's construction industry. It operates under Arizona Revised Statutes (A.R.S.) Title 32, Chapter 10 — the governing statute for contractor licensing — and the administrative rules in Arizona Administrative Code (AAC) Title 4, Chapter 9 , which implements the statute through procedures for applications, exams, and license administration.
Quick Answer: The AZ ROC is the Arizona state agency that licenses, investigates complaints against, and disciplines construction contractors under A.R.S. Title 32, Chapter 10 and AAC Title 4, Chapter 9.
The ROC's Three-Part Mission
The AZ ROC's statutory mandate rests on three pillars:
License — Issue contractor licenses to applicants who meet experience, examination, and financial responsibility standards. The ROC determines which classifications a contractor may lawfully perform and sets qualifying party requirements for each license.
Investigate — Receive and investigate consumer complaints against both licensed and unlicensed contractors. ROC investigators verify whether work met applicable building codes, contract terms, and industry standards.
Enforce — Impose disciplinary action when violations are substantiated. Enforcement tools include citations, administrative fines, license suspension, and license revocation.
These three functions form the backbone of Arizona contractor regulation. Every licensed contractor interacts with the ROC at application, during their license term, and — if things go wrong — through the complaint and discipline process.
The $1,000 Project-Cost License Threshold
Arizona draws a bright line at $1,000 in total project cost . Under A.R.S. Title 32, Chapter 10, a contractor license is required for any construction, alteration, or repair work where the total project cost — labor and materials combined — exceeds $1,000 . Projects costing $1,000 or less that do not require a building permit are exempt from the licensing requirement.
Key points about the threshold:
Total project cost means the full value of labor and materials, not the contractor's profit margin or overhead alone.
The threshold applies per project , not per day or per contract.
Even a single residential repair exceeding $1,000 triggers the license requirement.
Projects under $1,000 that do require a building permit may still require a licensed contractor — the exemption applies only to small projects that do not need a permit.
The threshold is the same statewide; it does not vary by city, county, or classification.
This rule is one of the most frequently tested provisions on the Statutes & Rules Exam because it defines the boundary between regulated and unregulated work.
Working Without a License
Performing contractor work that requires a license without holding the appropriate Arizona contractor license is a violation of A.R.S. Title 32, Chapter 10. The AZ ROC may impose the following categories of discipline:
- Citations — administrative citations for identified violations
- Fines — monetary penalties assessed for violations
- Suspension — temporary suspension of an existing license
- Revocation — permanent revocation of a license
Specific penalty dollar amounts are not published in the verified source materials for this guide. Candidates should focus on knowing the categories of discipline and the types of violations that trigger them — abandonment, fraudulent acts, code violations, and working without a license — rather than memorizing specific fine amounts.
The Complaint Process
When a consumer files a complaint with the AZ ROC, the agency follows a structured process:
Intake — The complaint is received and reviewed for jurisdiction. The ROC must have authority over the contractor and the type of work involved.
Investigation — An ROC investigator contacts the parties, inspects the work, and documents findings. The investigator determines whether the work met applicable building codes, contract terms, and industry standards.
Resolution — If a violation is found, the ROC may facilitate a settlement, issue a citation, or pursue formal disciplinary action. If no violation is found, the complaint is dismissed.
Discipline — In substantiated cases, the ROC imposes sanctions ranging from citations and fines to license suspension or revocation. Consumers may also seek recovery from the AZ Contractor Recovery Fund for faulty work or contractor abandonment, up to statutory limits.
Understanding the complaint process helps contractors respond appropriately if a complaint is filed against them and underscores the importance of documenting work quality, contract compliance, and communication with clients.
Key Statutes and Rules
Citation Scope
A.R.S. Title 32, Ch. 10 Governing statute: contractor licensing classifications, qualifications, discipline, Recovery Fund
- AAC Title 4, Ch. 9 Administrative rules: application procedures, exam requirements, license administration
- How This Maps to the Statutes & Rules Exam
The Statutes & Rules Exam (SRE) is the Arizona-specific business-and-law exam that every new applicant must pass unless they have been a qualifying party on an Arizona contractor license within the preceding 5 years. The SRE tests your knowledge of A.R.S. Title 32, Chapter 10 and AAC Title 4, Chapter 9 directly. Key SRE facts:
Vendor: GMetrix (online only, not at test centers)
Format: open-book, self-paced training course followed by a scored test (item count not published by AZ ROC or GMetrix)
- Passing score: 70%
- Fee: $61
- References: A.R.S. Title 32 Ch 10, AAC Title 4 Ch 9, AZ ROC SRE Glossary
- Cannot be waived — it is Arizona-specific, and the course includes a single exam attempt
Understanding the ROC's structure, the $1,000 threshold, and the categories of discipline is foundational SRE material that appears throughout the licensing-law portions of your exam preparation.