Study guide
2.5 Safety Data Sheets (SDS) & Chemical Safety
Arizona Nail Technician License Exam Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 About the Arizona Nail Technician Exam 1.2 Exam Day, Scheduling & Study Strategy
2 Infection Control & Safety Practices
2.1 Principles of Disease Transmission 2.2 Infection Control & Disinfection Levels 2.3 Blood Exposure & Blood Spill Procedures 2.4 Adverse Reactions & Client Safety 2.5 Safety Data Sheets (SDS) & Chemical Safety 2.6 Work Injury Prevention & Ergonomics
3 Anatomy & Physiology
3.1 Nail Structure & Growth 3.2 Skin Structure & Functions 3.3 Nail Disorders & Diseases 3.4 Bones & Muscles of the Arms & Hands 3.5 Bones & Muscles of the Legs & Feet
4 Chemistry of Nail Products
4.1 Product Ingredients & Chemical Interactions 4.2 Physical Changes vs. Chemical Reactions 4.3 Ingredients That May Cause Harm
5 Client Consultation, Tools & Preparation
5.1 Client Consultation & Documentation 5.2 Nail Service Tools, Equipment & Implements 5.3 Safe Use & Care of Implements 5.4 Workstation Set-Up & Service Preparation
6 Manicure & Pedicure Services
6.1 Basic Manicure Procedure 6.2 Basic Pedicure Procedure 6.3 Massage Mechanics & Techniques 6.4 Add-On Services (Paraffin, Masks, Gel Polish, Thermal)
7 Nail Enhancement Services
7.1 Nail Tips 7.2 Acrylic (Liquid & Powder) Enhancements 7.3 Light-Cured Gel Enhancements 7.4 Powder Dip, Maintenance & Removal of Enhancements
8 Post-Service Procedures & Professional Practice
8.1 Post-Service Cleanup & Procedures 8.2 After Care & Client Education 8.3 Professional Ethics & Salon Consumer Protection
9 The NIC Written Practical Examination
9.1 Written Practical Format & Work Area / Client Preparation 9.2 Basic Water Manicure & Polish Application 9.3 Full-Well Nail Tip Application & Blending 9.4 The Sculptured Nail 9.5 Sculptured Nail Removal & the Blood Exposure Procedure
10 Arizona State Regulations & Licensing
10.1 Arizona Board of Barbering & Cosmetology Licensing 10.2 License Renewal, Expiration & Reinstatement 10.3 Arizona Salon Rules & Prohibited Practices
2.5 Safety Data Sheets (SDS) & Chemical Safety
Key Takeaways Explain This Topic AI
A Safety Data Sheet (SDS), formerly called an MSDS, is a 16-section document detailing a nail product's hazards, ingredients, handling, and emergency measures
OSHA's Hazard Communication Standard (29 CFR 1910.1200) requires salons to keep SDS for every chemical product and make them accessible to all employees during work hours
The 16 SDS sections follow a required order: identification, hazard identification, composition, first-aid, fire-fighting, accidental release, handling and storage, exposure controls, physical and chemical properties, stability and reactivity, toxicology, ecology, disposal, transport, regulatory, and other information
Section 4 (first-aid) and Section 8 (exposure controls and PPE) are the most-used sections during a salon incident
Acetone and acrylic monomers are flammable and must be stored away from heat, sparks, open flame, and UV-curing lamps in approved, labeled, closed containers
Last updated: August 2026
What an SDS Is and Why Salons Must Have Them
A Safety Data Sheet (SDS) is a standardized, manufacturer-provided document that explains the hazards of a chemical product, its ingredients, safe handling, storage, exposure controls, and emergency measures. SDS replaced the older Material Safety Data Sheet (MSDS) format under the globally harmonized Hazard Communication Standard (HCS, 29 CFR 1910.1200) , which OSHA updated to align with the Globally Harmonized System (GHS).
Under the HCS, employers — including salon owners — must:
Maintain an SDS for every hazardous chemical product in the workplace (acrylic monomer, gel, polish, acetone, disinfectants, lotions).
Keep SDS readily accessible to all employees during their work hours — not locked away.
Train employees on how to read an SDS and on the hazards of the products they use.
Maintain labels on every primary and secondary container.
The 16 SDS Sections
Every SDS follows the same 16-section order. You do not need to memorize every title, but you should know the order and the purpose of the sections you will use in an incident.
- # Section What It Covers
- 1 Identification Product name, manufacturer, recommended use, emergency phone
- 2 Hazard identification GHS pictograms, signal words (Danger / Warning), hazard statements
- 3 Composition / ingredients Chemical identity and concentration of hazardous ingredients
- 4 First-aid measures What to do for inhalation, skin, eye, or ingestion exposure
- 5 Fire-fighting measures Flammability, suitable extinguishing media
- 6 Accidental release measures How to contain and clean a spill
- 7 Handling and storage Safe handling practices and storage conditions
- 8 Exposure controls / PPE OSHA PELs, ventilation, and required personal protective equipment
- 9 Physical and chemical properties Appearance, odor, flash point, boiling point
- 10 Stability and reactivity Conditions to avoid, incompatible materials
- 11 Toxicological information Health effects and routes of exposure
- 12 Ecological information Environmental effects (not required on every SDS)
- 13 Disposal considerations Safe disposal of waste and containers
- 14 Transport information Shipping classification
- 15 Regulatory information Applicable regulations
- 16 Other information Revision date and disclaimer
- The Two Sections You Will Actually Use
Section 4 (First-aid measures) — tells you what to do if a product splashes in an eye, contacts skin, is inhaled, or is swallowed. This is the section you reach for during an incident.
Section 8 (Exposure controls / PPE) — tells you the permissible exposure limit, the ventilation needed, and the gloves, mask, or eye protection required.
How to Read an SDS for a Nail Product
Suppose you open a new bottle of gel adhesive. Before you use it, you should:
Check Section 2 (Hazard identification) for the signal word and pictograms — flammable, skin sensitizer, eye irritant.
Read Section 4 (First-aid) so you know the eye-contact and skin-contact response before anything goes wrong.
Read Section 7 (Handling and storage) for the storage temperature and incompatibilities.
Read Section 8 (Exposure controls / PPE) for the required gloves and ventilation.
Where SDS Must Be Kept
SDS must be accessible to all employees during work hours , either in a physical binder kept in a known location in the salon or in an electronic system that any employee can reach without barriers. They cannot be locked in an office, stored off-site, or hidden behind a login only a manager can open. If an OSHA inspector or an employee asks to see the SDS for acetone, the salon must produce it immediately.
Hazard Communication Standard in Plain Terms
The HCS rests on a simple idea: employees have a right to know what chemicals they work with and how to protect themselves. That right is delivered through labeled containers, accessible SDS, and training. A salon that fails any of these is out of compliance and exposes its workers to preventable injury.
- Safe Handling and Storage of Nail Chemicals
- Acetone
Highly flammable (flash point well below room temperature).
Store in a closed, labeled container away from heat, sparks, open flame, and UV-curing lamps.
Use in small working amounts ; do not keep large quantities open on the table.
Keep the work area ventilated to limit vapor inhalation.
Acrylic Monomer (Liquid)
Flammable and a skin sensitizer .
Store in a cool, dry area with the cap closed; vapors can build up in a closed, warm cabinet.
Keep separate from oxidizers and strong acids.
Gels and Polishes
Keep containers closed when not in use to limit vapor and prevent spillage.
Store away from direct sunlight and heat to preserve product integrity.
Disinfectants
Store concentrates separately, out of reach of clients, and follow the label for shelf life and dilution.
Common Exam Traps
MSDS is the old name. The current term is SDS; some exam items use both to check whether you recognize the update.
Locked-away SDS are non-compliant. Accessible during work hours is the requirement.
Acetone storage near a UV lamp or heat source is a classic hazard question — flammables go in closed, labeled containers away from ignition sources.