Study guide
12.2 Categories 2a & 2b: Wood-Destroying Organisms, WDIIR & TARF Reporting
Arizona Pesticide Applicator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: State & Federal Pesticide Laws, Regulations & Compliance
1.1 Federal Pesticide Regulation & FIFRA Framework 1.2 Arizona Pesticide Statutes, AZDA & PMD Regulatory Framework 1.3 State Licensing, Certification Categories & Recordkeeping Compliance
2 Chapter 2: Principles of Integrated Pest Management (IPM) & Pest Biology
2.1 Pest Identification, Biology, and Life Cycles 2.2 Integrated Pest Management Framework & Economic Injury Thresholds 2.3 Pest Management Tactics & Pesticide Resistance Management
3 Chapter 3: Pesticide Formulations, Adjuvants & Compatibility
3.1 Liquid Formulations: Chemistry, Handling, and Characteristics 3.2 Dry Formulations, Baits, and Fumigants 3.3 Spray Adjuvants, Tank Mixing Sequence & Compatibility Testing
4 Chapter 4: Reading and Interpreting Pesticide Labels & Safety Data Sheets
4.1 Legal Status and Core Components of the Pesticide Label 4.2 Signal Words, Hazard Statements, and Precautionary Language 4.3 Directions for Use, WPS Requirements, and Safety Data Sheet (SDS) Analysis
5 Chapter 5: Pesticide Toxicology, Hazards & First Aid
5.1 Pesticide Toxicology, Dose-Response & Routes of Human Exposure 5.2 Poisoning Symptoms by Major Chemical Class & Mode of Action 5.3 Immediate First Aid, Medical Antidotes & Desert Heat Stress Triage
6 Chapter 6: Personal Protective Equipment (PPE) & Worker Protection Standard
6.1 PPE Selection, Chemical Resistance & Respiratory Protection Standards 6.2 PPE Inspection, Cleaning, Fit Testing & Disposal 6.3 Worker Protection Standard (WPS) Compliance, Notification & Decontamination
7 Chapter 7: Environmental Protection, Drift Mitigation & Non-Target Safety
7.1 Environmental Fate, Soil Leaching & Desert Groundwater Protection 7.2 Spray Drift Dynamics, Droplet Sizing & Microclimate Management 7.3 Protecting Pollinators, Beneficial Organisms & Endangered Species
8 Chapter 8: Safe Pesticide Handling, Storage & Equipment Calibration
8.1 Secure Transport, Storage Facility Safety & Spill Management 8.2 Application Equipment Components, Nozzle Selection & Operation 8.3 Sprayer and Granular Applicator Calibration Mathematics
9 Chapter 9: Planning the Application — Mixing, Loading & Professional Practice
9.1 Selecting the Pesticide & Pre-Application Planning 9.2 Safe Mixing, Loading & Accurate Measurement 9.3 Container Rinsing, Rinsate Handling & Equipment Cleanup 9.4 Professionalism, Ethics & Public Communication
10 Chapter 10: Emergency & Incident Response
10.1 Emergency Response Planning & Spill Kits 10.2 Pesticide Fires, Incident Reporting & Waste Disposal
11 Chapter 11: Arizona Agricultural Credentials, Permits & Licensing
11.1 The Arizona Credential Key: Which Permit or Licence You Need 11.2 The Pest Control Advisor: Arizona’s Recommendation Licence 11.3 Custom Applicators, Aerial Application & Drone Licensing
12 Chapter 12: Arizona Structural Categories in Practice (PMD)
12.1 Category 1: Industrial, Institutional & Structural Pest Control 12.2 Categories 2a & 2b: Wood-Destroying Organisms, WDIIR & TARF Reporting 12.3 Category 3: Ornamental & Turf Pest Control 12.4 Categories 4 & 5: Right-of-Way and Aquatic Pest Control 12.5 Category 6: Fumigation & Fumigation Management Plans
12.2 Categories 2a & 2b: Wood-Destroying Organisms, WDIIR & TARF Reporting
Key Takeaways Explain This Topic AI
Arizona splits wood-destroying organism work into Category 2a, treatment by means other than a fumigant, and Category 2b, inspection only — and the inspection category expressly excludes preparing treatment proposals.
Wood destruction work carries its own financial security: a business performing termite treatments needs $100,000 of surety or policy rider for termite damage due to negligent treatment, and a business issuing inspection reports needs $100,000 for errors and omissions.
A Termite Action Report Form must be submitted to the PMD within 30 days of completing a pretreatment, new-construction treatment, final grade treatment, initial corrective termite treatment or a WDIIR, with the fee and any late penalty.
The dominant Arizona subterranean termite is the desert species Heterotermes aureus, which drives the state’s pretreatment-heavy construction practice and its very high volume of termite reporting.
Last updated: August 2026
Categories 2a & 2b: Wood-Destroying Organisms, WDIIR & TARF Reporting
Core Principle: Termite work is the most heavily reported activity in Arizona pest management, and the reason is structural: the desert subterranean termite is ubiquitous, nearly every new slab is pretreated, and almost every real estate transaction generates an inspection report. Arizona responds with a dedicated reporting system and a deliberate split between the person who inspects and the person who sells the treatment.
The Category Split, and Why It Exists
Category Scope
2a — Wood-destroying organism treatment Inspecting for the presence or absence of wood-destroying organisms and treating for them in or about a residential or other structure, by a means other than use of a fumigant
2b — Wood-destroying insect inspection Inspecting for the presence or absence of wood-destroying insects only , and excluding preparing treatment proposals
Wood preservation Applying pesticides labeled for utility poles or railroad ties directly to structural wood or wood products not part of an existing structure , including drilling a cavity, inserting methylisothiocyanate or a similar product, and sealing the cavity
The exclusion in 2b is an ethics control written into the licensing scheme. A wood-destroying insect inspection report frequently governs a property sale, and the incentive to find findings that justify a contract is obvious. By separating the factual report from the commercial proposal, Arizona reduces that pressure structurally rather than relying on good intentions. Fumigation for drywood termites is a Category 6 activity, not 2a.
The Arizona Termite Complex
Organism Practical significance
Heterotermes aureus — desert subterranean termite The dominant structural species across the low desert. Forages actively in warm conditions, builds drop tubes from above as well as shelter tubes from below, and is the reason Arizona construction is pretreatment-heavy.
Reticulitermes spp. Present at higher elevations and in cooler parts of the state.
Drywood termites Do not require soil contact; infest sound dry wood. Localised treatment or fumigation, and fumigation moves the job to Category 6.
Wood rot and decay fungi Moisture-driven. Correcting the water source is the control; chemistry alone fails.
Wood-boring beetles Identification determines whether the infestation is active or a legacy of infested lumber.
Treatment Methods
Pre-construction (pretreatment). A continuous horizontal chemical barrier applied to the soil beneath and around the slab before concrete placement, with vertical barriers at footings, plumbing penetrations and expansion joints. Continuity is everything: a gap is a highway. If a treated barrier is disturbed after treatment, the disturbed area must be re-treated.
New-construction treatment. Applied during construction after the pretreatment stage, again subject to the continuity requirement.
Final grade treatment. Establishing the exterior vertical barrier once grading is complete.
Post-construction corrective treatment. Trenching and rodding the exterior perimeter, drilling through slabs and hardscape to inject beneath, and treating voids in block walls. Baiting systems provide a monitoring-and-elimination alternative where drilling is impractical.
For pretreatment, new-construction and final grade work establishing an exterior vertical barrier, the report must state the chemical used and its EPA registration number, the amount used, the percentage of active ingredient, and the square and linear footage treated . For a post-construction corrective treatment, it must state the type of treatment, the target organism, the chemical and EPA registration number, the amount used and the percentage of active ingredient .
Financial Security Riders
General business licensing requires at least $500,000 of financial security under A.R.S. § 3-3615. Wood destruction work adds two specific $100,000 per business license requirements:
Trigger Requirement
The licensee performs termite treatments A surety bond, or a liability insurance policy rider, of $100,000 for actual damages including reasonable costs of collection suffered as a result of termite damage due to negligent treatment
The licensee provides wood-destroying insect inspection reports A surety bond or policy rider of $100,000 for actual damages plus reasonable costs of collection arising from errors and omissions in the reports
Where the security is liability insurance, the required endorsements include care, custody and control, and wood-destroying insect inspection report errors and omissions.
The Reporting System: WDIIR and TARF
WDIIR — Wood Destroying Insect Inspection Report. The applicator submits the completed WDIIR within seven days of completing the inspection (R3-8-501). The business licensee records on it the TARF number ; and if the property is under warranty, the account number, target pest, date of initial treatment and date of warranty expiration; plus the TARF number of each subsequent TARF completed for the property.
TARF — Termite Action Report Form. Submitted electronically to the PMD within 30 days of completing each of:
a pretreatment , including pretreatment of an addition that does not abut the slab of a previously pretreated structure;
- a new-construction treatment , including such an addition;
- a final grade treatment ;
- an initial corrective termite treatment at a site; and
a WDIIR .
Each TARF carries a fee, plus any penalty under R3-8-103. Failing to submit the form or fee within 30 calendar days exposes the licensee to a penalty of not more than $100 per form under A.R.S. § 3-3631.
When a TARF is not required: after a supplemental WDIIR; and after the first initial corrective termite treatment at a site where the licensee performed the pretreatment or new-construction treatment, filed a TARF for it, and performs the corrective treatment under R3-8-309(D) or under a warranty.
Completion, for reporting purposes. A pretreatment or new-construction treatment is complete when no further preventative treatment is necessary until the final grade treatment — unless a disturbed continuous chemical barrier must be re-treated. On a multi-unit project, it is complete when no further preventative treatment is necessary for the last unit at the project.
WDIIRs are retained three years , as are service records, inspection reports and contracts.
Loading diagram...