Study guide

3.2 Dry Formulations, Baits, and Fumigants

Arizona Pesticide Applicator Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: State & Federal Pesticide Laws, Regulations & Compliance

1.1 Federal Pesticide Regulation & FIFRA Framework 1.2 Arizona Pesticide Statutes, AZDA & PMD Regulatory Framework 1.3 State Licensing, Certification Categories & Recordkeeping Compliance

2 Chapter 2: Principles of Integrated Pest Management (IPM) & Pest Biology

2.1 Pest Identification, Biology, and Life Cycles 2.2 Integrated Pest Management Framework & Economic Injury Thresholds 2.3 Pest Management Tactics & Pesticide Resistance Management

3 Chapter 3: Pesticide Formulations, Adjuvants & Compatibility

3.1 Liquid Formulations: Chemistry, Handling, and Characteristics 3.2 Dry Formulations, Baits, and Fumigants 3.3 Spray Adjuvants, Tank Mixing Sequence & Compatibility Testing

4 Chapter 4: Reading and Interpreting Pesticide Labels & Safety Data Sheets

4.1 Legal Status and Core Components of the Pesticide Label 4.2 Signal Words, Hazard Statements, and Precautionary Language 4.3 Directions for Use, WPS Requirements, and Safety Data Sheet (SDS) Analysis

5 Chapter 5: Pesticide Toxicology, Hazards & First Aid

5.1 Pesticide Toxicology, Dose-Response & Routes of Human Exposure 5.2 Poisoning Symptoms by Major Chemical Class & Mode of Action 5.3 Immediate First Aid, Medical Antidotes & Desert Heat Stress Triage

6 Chapter 6: Personal Protective Equipment (PPE) & Worker Protection Standard

6.1 PPE Selection, Chemical Resistance & Respiratory Protection Standards 6.2 PPE Inspection, Cleaning, Fit Testing & Disposal 6.3 Worker Protection Standard (WPS) Compliance, Notification & Decontamination

7 Chapter 7: Environmental Protection, Drift Mitigation & Non-Target Safety

7.1 Environmental Fate, Soil Leaching & Desert Groundwater Protection 7.2 Spray Drift Dynamics, Droplet Sizing & Microclimate Management 7.3 Protecting Pollinators, Beneficial Organisms & Endangered Species

8 Chapter 8: Safe Pesticide Handling, Storage & Equipment Calibration

8.1 Secure Transport, Storage Facility Safety & Spill Management 8.2 Application Equipment Components, Nozzle Selection & Operation 8.3 Sprayer and Granular Applicator Calibration Mathematics

9 Chapter 9: Planning the Application — Mixing, Loading & Professional Practice

9.1 Selecting the Pesticide & Pre-Application Planning 9.2 Safe Mixing, Loading & Accurate Measurement 9.3 Container Rinsing, Rinsate Handling & Equipment Cleanup 9.4 Professionalism, Ethics & Public Communication

10 Chapter 10: Emergency & Incident Response

10.1 Emergency Response Planning & Spill Kits 10.2 Pesticide Fires, Incident Reporting & Waste Disposal

11 Chapter 11: Arizona Agricultural Credentials, Permits & Licensing

11.1 The Arizona Credential Key: Which Permit or Licence You Need 11.2 The Pest Control Advisor: Arizona’s Recommendation Licence 11.3 Custom Applicators, Aerial Application & Drone Licensing

12 Chapter 12: Arizona Structural Categories in Practice (PMD)

12.1 Category 1: Industrial, Institutional & Structural Pest Control 12.2 Categories 2a & 2b: Wood-Destroying Organisms, WDIIR & TARF Reporting 12.3 Category 3: Ornamental & Turf Pest Control 12.4 Categories 4 & 5: Right-of-Way and Aquatic Pest Control 12.5 Category 6: Fumigation & Fumigation Management Plans

3.2 Dry Formulations, Baits, and Fumigants

Key Takeaways Explain This Topic AI

Wettable Powders (WP) generate hazardous airborne dust during mixing and loading, cause rapid abrasive wear on soft nozzle tips, and require constant mechanical agitation in the spray tank.

Water-Dispersible Granules (WDG/DF) provide the field efficacy of wettable powders in an engineered, dust-free granular form that dramatically reduces applicator inhalation risks.

Granular formulations (G) minimize spray drift in arid winds but pose severe toxic ingestion hazards to ground-feeding birds that mistake granules for seeds or gizzard grit.

Fumigants volatilize into toxic, non-selective gases that penetrate structures, commodities, or soil, presenting lethal inhalation hazards requiring strict Fumigation Management Plans and supplied-air respirators.

Last updated: August 2026

3.2 Dry Formulations, Baits, and Fumigants

Dry pesticide formulations, baits, and fumigants represent vital chemical tools across Arizona’s diverse pest management landscapes, ranging from Yuma produce fields and Maricopa cotton acreage to structural termite work in Phoenix and rodent abatement along canal systems. While dry products eliminate many of the organic solvent hazards inherent in liquid emulsifiable concentrates, they introduce distinct physical challenges, including airborne dust inhalation during mixing, severe nozzle erosion, non-target avian poisoning, and lethal gaseous volatility.

1. Dry Sprayable Formulations: WP, WDG/DF, and SP

Dry sprayable formulations are packaged as dry powders or granules designed to be mixed with water in the spray tank prior to field delivery. +-----------------------------------------------------------------------------+

  • | DRY SPRAYABLE FORMULATION SPECTRUM |
  • +-----------------------------------------------------------------------------+
  • | WETTABLE POWDERS (WP) | WATER-DISPERSIBLE GRANULES | SOLUBLE POWDERS (SP)|
  • | | (WDG / DF) | |
  • | - Insoluble a.i. + clay | - Extruded granules | - 100% water-soluble|
  • | - High inhalation dust | - Dust-free pouring | - Dissolves to true |
  • | - Abrasive to brass tips | - Forms suspension in tank | solution in water |
  • | - Constant agitation req | - Constant agitation req | - No agitation once |
  • | | | dissolved |
  • +-----------------------------------------------------------------------------+
  • Wettable Powders (WP / W)

A Wettable Powder (WP) consists of an insoluble dry active ingredient blended with a finely ground inert carrier (such as talc, kaolin clay, or diatomaceous earth) and wetting/dispersing agents. When added to water, the powder does not dissolve; instead, the particles disperse to form a suspension .

Operational Characteristics :

High Inhalation Hazard : The primary hazard of WPs occurs during measuring, weighing, and tank loading. Pouring the dry powder generates fine, airborne chemical dust that is easily inhaled. Applicators must wear NIOSH-approved particulate respirators (N95 or P100) during mixing and loading.

Equipment Wear & Abrasiveness : The inert clay and mineral carriers act like liquid sandpaper under high pressure. Spraying WP slurries rapidly erodes soft brass and aluminum nozzle tips, expanding orifice diameters and causing massive over-application. Applicators should install wear-resistant nozzle tips made of hardened stainless steel, ceramic, or polymer materials .

Tank Agitation : Requires vigorous, continuous mechanical or hydraulic agitation . If agitation stops, the heavy powder settles into a thick, compacted sludge at the tank bottom that will plug inline screens, suction strainers, and nozzle check valves.

Visible Residues : Leaves conspicuous white, chalky residues on treated surfaces, making WPs undesirable for luxury turf, ornamental plantings, or structural exteriors.

Water-Dispersible Granules (WDG) / Dry Flowables (DF)

Water-Dispersible Granules (WDG) , also sold as Dry Flowables (DF) , are the modern, dustless alternative to wettable powders. The active ingredient and inert carriers are compressed or extruded into small, dry, bead-like granules during manufacturing.

Advantages :

Eliminates Dust Hazard : The granular formulation pours smoothly like dry grain, generating virtually zero airborne dust during tank loading. This drastically reduces acute inhalation exposure for the applicator.

Easy Handling : Measures easily in calibrated volumetric cylinders and washes cleanly out of packaging.

Tank Behavior : Once added to the water, the granules disintegrate rapidly into microscopic particles, forming a suspension identical to a WP. Like WPs, WDGs require continuous tank agitation and can cause abrasive wear on soft nozzle tips.

Soluble Powders (SP / WSP)

A Soluble Powder (SP) consists of a dry active ingredient and inert carriers that are completely water-soluble.

Operational Characteristics :

When added to the spray tank, the powder dissolves entirely to form a true solution .

Once dissolved, no continuous agitation is required, and the solution will never settle or separate.

Non-abrasive to pumps, valves, and nozzle tips.

Water-Soluble Packaging (WSP) : To eliminate the inhalation dust hazard of measuring loose SPs, manufacturers frequently seal pre-weighed doses in water-soluble polyvinyl alcohol (PVA) film bags. The applicator drops the sealed bag directly into the spray tank, where the film dissolves in water within 90 seconds, completely eliminating applicator contact with the concentrated pesticide.

2. Dry Non-Sprayable Formulations: Granules, Pellets, and Dusts

Dry non-sprayable formulations are manufactured for direct field application in their dry state, without water dilution or spray tank mixing.

Formulation Code Physical Form Typical % a.i. Application Equipment Primary Target / Setting Key Operational Hazards

G (Granules) Coarse porous particles (clay, corncobs) 1% – 15% Broadcast spreader, drop seeder, band applicator Soil pests, pre-emergent weeds, turf insects Avian wildlife ingestion (mistaken for grit/seed)

P / PS (Pellets) Uniform extruded cylinders / pellets 1% – 20% Hand spreaders, spot applicators, baiters Turf spot treatments, aquatic weed control Child / pet ingestion hazard

D (Dusts) Ultra-fine dry powder (talc, chalk) 0.5% – 10% Hand duster, power bulb duster, bellows Structural voids, crack & crevice, seed boxes Severe drift outdoors; inhalation hazard

Granules (G) and Pellets (P)

Granular formulations are created by impregnating coarse, porous inert particles (such as calcined clay, crushed walnut shells, ground corn cobs, or fertilizer granules) with a low concentration of active ingredient (typically 1% to 15%).

Advantages : Ready-to-use without water hauling; heavy particles drop directly to the soil surface with minimal drift hazard , even in typical Arizona desert breezes (5–8 mph); excellent canopy penetration through dense turf or field crops.

Activation : Most soil-applied granules require soil incorporation or post-application irrigation (0.25 to 0.5 inch of water) to release the active ingredient from the carrier matrix into the root zone.

Critical Wildlife Hazard : Ground-feeding birds (such as mourning doves, Gambel's quail, and songbirds) actively forage for seeds and ingest small gravel/grit to grind food in their muscular gizzards. Birds mistake pesticide granules for seeds or grit, ingesting lethal doses of organophosphate, carbamate, or synthetic pyrethroid active ingredients. Under Arizona environmental rules, applicators must immediately sweep up spilled granules on driveways, walkways, and loading pads, and ensure agricultural granules are properly incorporated beneath the soil surface. +-----------------------------------------------------------------------------+

  • | AVIAN GRANULAR TOXICITY PATHWAY |
  • | |
  • | [ Exposed Granules on Soil ] ---> [ Bird Forages for Grit / Seeds ] |
  • | | |
  • | [ Granule Ingested in Gizzard ] <----------+ |
  • | | |
  • | [ Lethal Chemical Desorption ] ---> Acute Neurotoxic Mortality |
  • +-----------------------------------------------------------------------------+
  • Dusts (D)

Dust formulations consist of very low concentrations of active ingredient (0.5% to 10%) bound to ultra-fine, lightweight carriers such as talc, pyrophyllite, chalk, or clay. Dusts are applied strictly dry.

Outdoor Limitations : In Arizona's open environment, outdoor broadcast dusting is severely restricted or prohibited due to extreme drift hazards . Thermal updrafts and light desert breezes carry fine dust particles miles off-target.

Structural & Specialized Uses : Dusts excel in indoor crack-and-crevice pest management (e.g., controlling cockroaches, scorpions, and silverfish), injection into drywood termite wall galleries, attic void treatments, and agricultural seed-box treatments. Because dusts carry an electrostatic charge, they adhere to insect cuticles as pests crawl across treated surfaces, resulting in lethal grooming ingestion or cuticular abrasion.

3. Baits (B)

A Bait (B) formulation is an edible mixture combining a low concentration of active toxicant (usually 0.1% to 5%) with an attractive food base (such as grains, peanut butter, animal fats, sugars, or synthetic pheromones). +-----------------------------------------------------------------------------+

  • | BAIT MANAGEMENT & SAFETY |
  • +-----------------------------------------------------------------------------+
  • | 1. BAIT SHYNESS / AVERSION | 2. NON-TARGET SAFETY & STATIONS |
  • | | |
  • | - Occurs when fast-acting | - EPA mandates tamper-resistant bait |
  • | toxicants cause rapid nausea | stations for all exterior/accessible |
  • | - Surviving pests associate | rodenticide placements |
  • | food odor with illness | - Prevents child, pet, and raptor |
  • | - Pests permanently refuse | secondary poisoning |
  • | to consume future bait | - Must be locked, anchored, and labeled |
  • +-----------------------------------------------------------------------------+
  • 1. Bait Shyness (Aversion)

If a bait formulation contains a fast-acting acute toxicant that induces rapid sub-lethal distress or gastrointestinal nausea before a lethal dose is ingested, surviving rodents or insects quickly associate the food odor with illness. This learned behavior is called bait shyness or bait aversion . Once developed, the pest population will reject that bait matrix entirely. Applicators manage bait shyness by deploying slow-acting toxicants (e.g., second-generation anticoagulant rodenticides, insect growth regulators, or metabolic inhibitors like hydramethylnon) or pre-baiting with non-toxic food to establish feeding patterns.

2. Tamper-Resistant Bait Stations & Non-Target Hazards

Outdoor rodenticide baiting in Arizona presents severe primary and secondary poisoning hazards:

Primary Poisoning : Domestic dogs, children, or non-target wildlife directly consuming exposed bait blocks or pellets.

Secondary Poisoning : Predators and scavengers (such as barn owls, red-tailed hawks, kit foxes, coyotes, and domestic cats) consuming poisoned rodents that have accumulated anticoagulant toxicants (e.g., brodifacoum, difethialone) in their liver tissues.

Regulatory Mandate : Under EPA and Arizona PMD regulations, all rodenticides applied outdoors, above-ground, or in locations accessible to children, pets, or non-target wildlife must be secured inside EPA-certified, tamper-resistant bait stations . Stations must be constructed of sturdy, weather-resistant plastic or metal, equipped with locking mechanisms, anchored securely to the ground or wall, and labeled with emergency contact information.

4. Fumigants: Lethal Volatile Gases

Fumigants are specialized chemical formulations that exist as gases, liquids that rapidly volatilize, or solids that release toxic gas upon exposure to atmospheric moisture, soil moisture, or temperature.

Major Fumigant Compounds

Aluminum Phosphide / Magnesium Phosphide (e.g., Phostoxin®): Solid pellets or tablets that react with ambient air humidity to release phosphine gas ( P H 3 PH_3 P H 3 ​ ) . Widely used in stored grain silos and agricultural burrowing rodent control (pocket gophers, California ground squirrels).

Sulfuryl Fluoride (e.g., Vikane®): Compressed gas cylinder formulation used for whole-structure structural fumigation of drywood termites and wood-boring beetles.

Metam Sodium / Metam Potassium : Liquid agricultural soil fumigants that break down into volatile methyl isothiocyanate (MITC) gas upon contact with moist soil to kill nematodes, soil pathogens, and weed seeds prior to planting.

Extreme Operational & Safety Requirements

Fumigants represent the most acutely hazardous pesticide class in commercial pest control. Because gases diffuse at the molecular level, they penetrate packaging, porous wood, cracks, and human respiratory membranes instantly.

Caution

FUMIGATION SAFETY PROTOCOLS ARE NON-NEGOTIABLE UNDER ARIZONA LAW:

Fumigation Management Plan (FMP) : Applicators must author a detailed, site-specific written FMP prior to applying agricultural or structural fumigants, covering emergency response, monitoring protocols, buffer zones, and notification.

Supplied-Air Respirators (SCBA) : Standard cartridge respirators (air-purifying respirators) offer zero protection against phosphine or sulfuryl fluoride gases. Applicators must wear positive-pressure Self-Contained Breathing Apparatus (SCBA) or supplied-air airline respirators whenever gas concentrations exceed legal threshold limits.

Direct-Reading Gas Monitoring : Applicators must utilize calibrated electronic photoionization detectors (PID) or Draeger colorimetric gas detector tubes to verify zero-leak containment during treatment and confirm clearance levels (<0.3 ppm for phosphine) before authorizing human re-entry.

Arizona Burrowing Pest Rules : When treating pocket gopher or ground squirrel burrows with aluminum phosphide, Arizona statutes strictly prohibit fumigant application within 100 feet of any building that is or may be occupied by humans or domestic animals, and soil moisture must be adequate to generate the gas while sealing burrow openings with soil.

Loading diagram... Classification, Handling Profiles, and Hazards of Dry Pesticides, Baits, and Fumigants