Study guide
10.3 Biological Nutrient Removal: Nitrification, Denitrification & Phosphorus Removal
Arizona Water/Wastewater Operator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Arizona Regulatory Framework & ADEQ Certification
1.1 ADEQ Operator Certification Rules & Grade Structure 1.2 Facility Classification & Operator in Direct Responsible Charge (ODRC) 1.3 Arizona Aquifer Protection Permit (APP) Program & BADCT 1.4 AZPDES Surface Water Discharges & Arizona Reclaimed Water Standards 1.5 The WPI Need-to-Know Criteria: What Is Actually on Your Exam
2 Chapter 2: Federal Drinking Water & Clean Water Act Compliance
2.1 Safe Drinking Water Act (SDWA) Primary & Secondary MCLs 2.2 Surface Water Treatment Rules & Revised Total Coliform Rule (RTCR) 2.3 Stage 1 & Stage 2 Disinfectants/Disinfection Byproducts Rules (D/DBPR)
3 Chapter 3: Source Water Assessment, Wells & Watershed Protection
3.1 Groundwater Sources, Well Components & Water Level Measurement 3.2 Surface Water Sources, Intakes & Reservoir Management 3.3 Watershed Management, Contamination Sources & Public Education 3.4 Pretreatment: Aeration, Presedimentation & Algae Control
4 Chapter 4: Source Water Quality, Coagulation & Flocculation
4.1 Arizona Source Water Quality & Arid Climate Challenges 4.2 Coagulation Chemistry, Coagulants & Jar Testing 4.3 Flocculation Basin Design & Process Control 4.4 Sedimentation Basins, Clarifiers & Solids Contact Units
5 Chapter 5: Filtration Systems & Advanced Separation
5.1 Granular Media Filtration Principles & Media Types 5.2 Filter Backwash Operations, Ripening & Filter-to-Waste 5.3 Membrane Filtration & Reverse Osmosis Desalination 5.4 Ion Exchange Softening, Arsenic Removal & GAC Adsorption
6 Chapter 6: Drinking Water Disinfection & Chemical Oxidation
6.1 Chlorine Chemistry & Break-Point Chlorination 6.2 The CT Disinfection Concept & Basin Hydraulics 6.3 Alternative Disinfectants: Chloramines, Ozone, UV & Chlorine Dioxide
7 Chapter 7: Specialized Drinking Water Treatment & Chemical Conditioning
7.1 Iron & Manganese Removal 7.2 Fluoridation: Chemicals, Dosage & Safety 7.3 Corrosion Control, Saturation Indices & the Lead and Copper Rule 7.4 Water Treatment Plant Residuals Handling & Disposal
8 Chapter 8: Water Treatment Plant Equipment Operation & Maintenance
8.1 Raw Water Intake, Screening & Pumping Equipment 8.2 Chemical Feed Equipment, Storage & Metering 8.3 Instrumentation, Online Analyzers, SCADA & Calibration 8.4 Valves, Motors, Auxiliary Systems & Maintenance Programs
9 Chapter 9: Wastewater Preliminary, Primary & Biological Treatment Principles
9.1 Wastewater Characteristics & Preliminary Treatment 9.2 Primary Clarification Design & Settling Mechanics 9.3 Biological Treatment Kinetics & Microbiology
10 Chapter 10: Activated Sludge Processes & Nutrient Removal
10.1 Activated Sludge Configurations & Operational Mass Balance 10.2 Process Control Parameters, Settleability & Troubleshooting 10.3 Biological Nutrient Removal: Nitrification, Denitrification & Phosphorus Removal
11 Chapter 11: Fixed-Film, Lagoon & Advanced Secondary Processes
11.1 Trickling Filters & Attached Growth Fundamentals 11.2 Rotating Biological Contactors & Hybrid Processes 11.3 Stabilization Ponds & Lagoon Systems 11.4 Membrane Bioreactors
12 Chapter 12: Tertiary Treatment, Wastewater Disinfection & Effluent Management
12.1 Tertiary Filtration & Advanced Effluent Polishing 12.2 Wastewater Chlorination & Dechlorination 12.3 Ultraviolet & Ozone Disinfection of Wastewater 12.4 Effluent Disposal, Reclaimed Water Reuse & Permit Compliance
13 Chapter 13: Residuals Management & Sludge Processing
13.1 Sludge Thickening & Digestion Processes 13.2 Sludge Dewatering Technologies & Drying Beds 13.3 EPA Part 503 Biosolids Rules & Arizona Beneficial Use
14 Chapter 14: Wastewater Plant Equipment Operation & Maintenance
14.1 Preliminary & Primary Treatment Equipment 14.2 Aeration Systems, Blowers, Diffusers & Dissolved Oxygen Control 14.3 Wastewater Pumps, Mixers & Chemical Dosing Equipment 14.4 Electrical Systems, Online Analyzers & Auxiliary Power
15 Chapter 15: Water Distribution Infrastructure & Hydraulic Management
15.1 Water Main Materials, Fittings & Appurtenances 15.2 Water Storage, Pressure Management & Water Age 15.3 Cross-Connection Control & Backflow Prevention 15.4 Main Maintenance, Unidirectional Flushing & Leak Detection 15.5 Distribution Hydraulics, Head Loss & C-Factor 15.6 System Mapping, GIS, Plans & Distribution SCADA
16 Chapter 16: Water Main Installation, Repair & Disinfection
16.1 Main & Service Line Installation, Tapping & Thrust Restraint 16.2 New Construction Inspection, Pressure Testing & Utility Locating 16.3 Disinfection of Mains, Storage Facilities & Repaired Components 16.4 Booster Stations, Meters & Storage Facility Inspection
17 Chapter 17: Distribution Water Quality Management & Field Testing
17.1 Distribution Chemical Feed, Dosage Adjustment & Booster Chlorination 17.2 Distribution Sampling Programs & Field Analyses 17.3 Chemical Transport, Storage & Handling in Distribution Operations 17.4 Interpreting Water Quality Data, Complaints & Nitrification Control
18 Chapter 18: Wastewater Collection Systems & Lift Stations
18.1 Gravity Sewer Design, Piping Materials & Manholes 18.2 Inflow & Infiltration (I&I) Assessment & Pipeline Rehabilitation 18.3 Wastewater Lift Stations, Pump Types & Force Mains 18.4 Hydrogen Sulfide Corrosion, Odor Control & Line Cleaning 18.5 Excavation, Heavy Equipment & Surface Restoration
19 Chapter 19: Collection System Cleaning, Inspection & Rehabilitation
19.1 Hydraulic Cleaning, Rodding & Blockage Removal 19.2 CCTV Inspection, Condition Assessment & FOG Control 19.3 Trenchless Rehabilitation: CIPP, Pipe Bursting & Lining 19.4 SSO Response, Flow Monitoring & Capacity Assurance
20 Chapter 20: Laboratory Testing, Quality Control & Monitoring
20.1 Drinking Water Analytical Methods & Compliance Testing 20.2 Wastewater Laboratory Analytics & Process Control Tests 20.3 Sampling Protocols, Chain of Custody & Laboratory QA/QC 20.4 Emerging Contaminants, PFAS & Advanced Analytical Methods
21 Chapter 21: Utility Safety Programs & Emergency Preparedness
21.1 Lockout/Tagout, Electrical Safety & Arc Flash 21.2 Personal Protective Equipment, Fall Protection & Bloodborne Pathogens 21.3 Traffic Control & Work Zone Safety 21.4 Emergency Response Planning & Disaster Recovery 21.5 Heat Illness Prevention, Respiratory Protection & Hearing Conservation
22 Chapter 22: Security, Administration & Utility Management
22.1 Facility Security, Vulnerability Assessment & Cybersecurity 22.2 Recordkeeping, Standard Operating Procedures & Regulatory Reporting 22.3 Budgets, Procurement, Cost Analysis & Capital Improvement Planning 22.4 Asset Management, Energy Optimization & Water Loss Control 22.5 Supervision, Training, Customer Service & Public Communication
23 Chapter 23: Applied Operator Mathematics, Pumping Hydraulics & Utility Safety
23.1 Chemical Feed Calculations & Dosage Problem Solving 23.2 Geometric Volumes, Hydraulic Loading & Detention Time Math 23.3 Pumping Mechanics, System Head & Horsepower Calculations 23.4 Plant Safety: Confined Spaces, Chemical Hazards & OSHA Standards 23.5 Unit Conversions & Using the Supplied Formula/Conversion Table 23.6 Percent Removal, Process Efficiency & Solution Blending
10.3 Biological Nutrient Removal: Nitrification, Denitrification & Phosphorus Removal
Key Takeaways Explain This Topic AI
Biological nitrification is a two-step autotrophic process requiring 4.57 lbs of O2 and destroying 7.14 lbs of alkalinity as CaCO3 for every pound of NH4+-N oxidized to nitrate.
Nitrification is severely inhibited below pH 6.8 and experiences a 50% drop in biological kinetics for every 10°C decrease in wastewater temperature, requiring elevated MCRT during winter.
Biological denitrification is an anoxic heterotrophic process (DO < 0.2 mg/L) that reduces nitrate to inert N2 gas, recovering 3.57 lbs of alkalinity as CaCO3 per pound of NO3--N reduced (50% recovery).
The Modified Ludzack-Ettinger (MLE) configuration utilizes an Internal Mixed Liquor Recycle (IMR) pumping at 200% to 400% of forward flow to transfer nitrified mixed liquor back to a pre-anoxic basin.
Enhanced Biological Phosphorus Removal (EBPR) cycles Phosphorus Accumulating Organisms (PAOs) through an anaerobic selector (VFA uptake and P-release) into an aerobic zone (luxury P-uptake), permanently purging phosphorus via WAS.
Last updated: September 2026
10.3 Biological Nutrient Removal: Nitrification, Denitrification & Phosphorus Removal
Note
Arizona Aquifer Protection & Class A+ Reclaimed Water Standards : In Arizona, nitrogen management is strictly regulated by the Arizona Department of Environmental Quality (ADEQ) under the Aquifer Protection Permit (APP) program (A.A.C. Title 18, Chapter 9) and Reclaimed Water Quality Standards (A.A.C. Title 18, Chapter 11). Wastewater discharged to groundwater aquifers via vadose zone recharge wells or surface percolation basins must not exceed the Aquifer Water Quality Standard (AWQS) of 10.0 mg/L 10.0\text{ mg/L} 10.0 mg/L Total Nitrogen as N (established to prevent methemoglobinemia, or 'blue baby syndrome', in drinking water aquifers). Furthermore, achieving Class A+ Reclaimed Water requires Total Nitrogen to be consistently maintained below 10.0 mg/L 10.0\text{ mg/L} 10.0 mg/L as a 24-hour composite average, necessitating advanced Biological Nutrient Removal (BNR).
Nutrient enrichment (excessive nitrogen and phosphorus) in receiving aquatic environments accelerates eutrophication, triggers toxic cyanobacterial blooms, and depletes dissolved oxygen. In water-scarce Arizona, where over 90% of treated municipal wastewater is beneficially reclaimed for indirect potable reuse, groundwater replenishment, agricultural irrigation, or power plant cooling, biological nutrient removal is a fundamental design and operational requirement.
Biological Nitrogen Removal: Nitrification
Nitrification is a two-step biological oxidation of reduced nitrogen (ammonia/ammonium) to nitrite and subsequently to nitrate. It is carried out by obligate aerobic, chemolithoautotrophic bacteria that utilize inorganic carbon (carbon dioxide, C O 2 CO_2 C O 2 , or bicarbonate, H C O 3 − HCO_3^- H C O 3 − ) rather than organic carbon for cellular synthesis.
Two-Step Nitrification Biochemistry
Step 1: Ammonia Oxidation to Nitrite :
Ammonia-Oxidizing Bacteria (AOB), primarily Nitrosomonas (along with Nitrosococcus and Nitrosospira ), oxidize ammonia to nitrite ( N O 2 − NO_2^- N O 2 − ): 2 N H 4 + + 3 O 2 → Nitrosomonas 2 N O 2 − + 4 H + + 2 H 2 O + Energy 2NH_4^+ + 3O_2 \xrightarrow{\text{Nitrosomonas}} 2NO_2^- + 4H^+ + 2H_2O + \text{Energy} 2 N H 4 + + 3 O 2 Nitrosomonas 2 N O 2 − + 4 H + + 2 H 2 O + Energy
Step 2: Nitrite Oxidation to Nitrate :
Nitrite-Oxidizing Bacteria (NOB), primarily Nitrobacter and Nitrospira , oxidize nitrite to nitrate ( N O 3 − NO_3^- N O 3 − ): 2 N O 2 − + O 2 → Nitrobacter / Nitrospira 2 N O 3 − + Energy 2NO_2^- + O_2 \xrightarrow{\text{Nitrobacter / Nitrospira}} 2NO_3^- + \text{Energy} 2 N O 2 − + O 2 Nitrobacter / Nitrospira 2 N O 3 − + Energy
Overall Combined Nitrification Reaction : N H 4 + + 2 O 2 → N O 3 − + 2 H + + H 2 O + Synthesized Biomass NH_4^+ + 2O_2 \rightarrow NO_3^- + 2H^+ + H_2O + \text{Synthesized Biomass} N H 4 + + 2 O 2 → N O 3 − + 2 H + + H 2 O + Synthesized Biomass
Critical Stoichiometric Demands (Exam Essentials)
Stoichiometric Oxygen Requirement :
Step 1 requires 3.43 lbs O 2 3.43\text{ lbs } O_2 3.43 lbs O 2 per lb N H 4 + NH_4^+ N H 4 + -N oxidized to N O 2 − NO_2^- N O 2 − .
Step 2 requires 1.14 lbs O 2 1.14\text{ lbs } O_2 1.14 lbs O 2 per lb N O 2 − NO_2^- N O 2 − -N oxidized to N O 3 − NO_3^- N O 3 − .
Total Oxygen Demand : 4.57 lbs of O 2 consumed per lb of N H 4 + -N oxidized 4.57\text{ lbs of } O_2\text{ consumed per lb of } NH_4^+\text{-N oxidized} 4.57 lbs of O 2 consumed per lb of N H 4 + -N oxidized .
(Note: In a facility achieving complete nitrification, the oxygen demand for ammonia oxidation often accounts for 40% to 50% of the entire plant aeration requirement!)
Alkalinity Consumption :
The oxidation of ammonia releases two hydrogen ions ( 2 H + 2H^+ 2 H + ) per mole of nitrogen oxidized, neutralizing natural bicarbonate buffering:
7.14 lbs of Alkalinity (as C a C O 3 ) consumed per lb of N H 4 + -N oxidized 7.14\text{ lbs of Alkalinity (as } CaCO_3\text{) consumed per lb of } NH_4^+\text{-N oxidized} 7.14 lbs of Alkalinity (as C a C O 3 ) consumed per lb of N H 4 + -N oxidized .
If incoming wastewater lacks sufficient natural alkalinity, nitrification destroys the buffer, causing pH to drop rapidly. Nitrification rates drop steeply below pH 6.8 and cease completely at pH < 6.0 <6.0 < 6.0 . To sustain nitrification, facilities must add supplemental alkalinity: hydrated lime ( C a ( O H ) 2 Ca(OH)_2 C a ( O H ) 2 ), soda ash ( N a 2 C O 3 Na_2CO_3 N a 2 C O 3 ), caustic soda ( N a O H NaOH N a O H ), or magnesium hydroxide ( M g ( O H ) 2 Mg(OH)_2 M g ( O H ) 2 ).
Environmental Conditions for Optimal Nitrification
Dissolved Oxygen : Target > 2.0 to 3.0 mg/L >2.0\text{ to } 3.0\text{ mg/L} > 2.0 to 3.0 mg/L . Because autotrophic nitrifiers have a much lower oxygen affinity ( K D O ≈ 0.5 mg/L K_{DO} \approx 0.5\text{ mg/L} K D O ≈ 0.5 mg/L ) than heterotrophic carbon-oxidizers, low DO ( < 1.5 mg/L <1.5\text{ mg/L} < 1.5 mg/L ) selectively starves nitrifiers, leading to nitrite accumulation or incomplete ammonia conversion.
Optimal pH : 7.5 to 8.5 . Severe biological inhibition occurs below pH 6.8.
Temperature Kinetics : The maximum specific growth rate ( μ m a x \mu_{max} μ ma x ) of nitrifiers is highly temperature-dependent ( k T = k 20 × 1.072 T − 20 k_T = k_{20} \times 1.072^{T-20} k T = k 20 × 1.07 2 T − 20 ). Nitrification rates drop by approximately 50% for every 10 ∘ C 10^\circ\text{C} 1 0 ∘ C drop in wastewater temperature. In high-altitude northern Arizona winter conditions ( 10 ∘ C 10^\circ\text{C} 1 0 ∘ C ), the minimum required aerobic MCRT to retain nitrifiers increases from 5 days (summer) to 15 to 20 days .
Biological Nitrogen Removal: Denitrification
Biological denitrification is the biological reduction of oxidized nitrogen (nitrate, N O 3 − NO_3^- N O 3 − , and nitrite, N O 2 − NO_2^- N O 2 − ) to inert atmospheric nitrogen gas ( N 2 N_2 N 2 ). It is performed by ubiquitous facultative heterotrophic bacteria ( Pseudomonas , Alcaligenes , Paracoccus , Bacillus ) in an anoxic environment : N O 3 − → N O 2 − → N O ↑ → N 2 O ↑ → N 2 ↑ NO_3^- \rightarrow NO_2^- \rightarrow NO\uparrow \rightarrow N_2O\uparrow \rightarrow N_2\uparrow N O 3 − → N O 2 − → NO ↑→ N 2 O ↑→ N 2 ↑
Environmental Operating Requirements
Strict Anoxic Conditions : Free dissolved oxygen must be < 0.2 mg/L < 0.2\text{ mg/L} < 0.2 mg/L (ideally 0.0 mg/L 0.0\text{ mg/L} 0.0 mg/L ). In the presence of DO, facultative bacteria preferentially utilize oxygen as their terminal electron acceptor because it yields more metabolic energy, completely repressing the nitrate reductase enzyme system.
Alkalinity Recovery : Denitrification releases hydroxyl ions ( O H − OH^- O H − ), producing alkalinity:
3.57 lbs of Alkalinity (as C a C O 3 ) produced per lb of N O 3 − -N reduced 3.57\text{ lbs of Alkalinity (as } CaCO_3\text{) produced per lb of } NO_3^-\text{-N reduced} 3.57 lbs of Alkalinity (as C a C O 3 ) produced per lb of N O 3 − -N reduced .
This restores exactly 50% of the alkalinity destroyed during nitrification , helping stabilize basin pH without supplemental chemical purchase.
Readily Biodegradable Carbon Requirement : Denitrifiers are heterotrophs that require an organic carbon electron donor. Carbon can be supplied via raw wastewater influent readily biodegradable COD (rbCOD), endogenous cellular decay, or external supplemental carbon:
Methanol ( C H 3 O H CH_3OH C H 3 O H ) : 6 N O 3 − + 5 C H 3 O H → 3 N 2 ↑ + 5 C O 2 + 7 H 2 O + 6 O H − 6NO_3^- + 5CH_3OH \rightarrow 3N_2\uparrow + 5CO_2 + 7H_2O + 6OH^- 6 N O 3 − + 5 C H 3 O H → 3 N 2 ↑ + 5 C O 2 + 7 H 2 O + 6 O H − . Requires specialized acclimation for Methyloversatilis .
Alternative External Sources : Micro-C (proprietary carbohydrate/glycerin blends), pure glycerin, or sodium acetate ( C H 3 C O O N a CH_3COONa C H 3 COON a ).
Loading diagram... Modified Ludzack-Ettinger (MLE) BNR Configuration
- BNR System Configurations
- 1. Modified Ludzack-Ettinger (MLE) Process
Configuration Architecture : A Pre-Anoxic Basin followed in series by an Aerobic Basin , followed by a Secondary Clarifier.
Internal Mixed Liquor Recycle (IMR / Nitrate Recycle) : A high-capacity, low-head axial flow submersible pump recycles large volumes of nitrified mixed liquor from the effluent end of the aerobic basin back to the pre-anoxic basin at 200% to 400% of forward influent flow ( Q Q Q ) .
Process Elegance :
The pre-anoxic basin utilizes the raw influent's readily biodegradable organic carbon ( B O D 5 BOD_5 BO D 5 ) to drive denitrification, eliminating the cost of external carbon addition.
Denitrification in the pre-anoxic zone reduces the mass of BOD entering the aerobic basin, saving 15% to 25% of aeration blower energy.
Generates 3.57 lbs 3.57\text{ lbs} 3.57 lbs of alkalinity per lb N N N reduced, buffering the downstream nitrification basin.
Effluent Total Nitrogen Performance : Typically achieves 6 to 8 mg/L 6\text{ to } 8\text{ mg/L} 6 to 8 mg/L Total Nitrogen , comfortably complying with Arizona Class A+ reclaimed standards ( < 10 mg/L <10\text{ mg/L} < 10 mg/L ). Nitrate removal efficiency is governed by the recycle ratio: Theoretical Removal Efficiency = R I M R + R R A S 1 + R I M R + R R A S \text{Theoretical Removal Efficiency} = \frac{R_{IMR} + R_{RAS}}{1 + R_{IMR} + R_{RAS}} Theoretical Removal Efficiency = 1 + R I MR + R R A S R I MR + R R A S
(At R I M R = 3.0 R_{IMR} = 3.0 R I MR = 3.0 and R R A S = 0.5 R_{RAS} = 0.5 R R A S = 0.5 , theoretical removal is 3.5 / 4.5 = 77.8 % 3.5 / 4.5 = 77.8\% 3.5/4.5 = 77.8% ).
2. Four-Stage Bardenpho Process
Configuration Architecture : Four sequential biological zones in series:
Primary Anoxic Zone : Receives raw influent, RAS, and 400% IMR recycle; removes ~75% of nitrate using influent carbon.
First Aerobic Zone : Completes carbonaceous BOD oxidation and achieves full nitrification of ammonia to nitrate.
Secondary Post-Anoxic Zone : An anoxic basin receiving no raw wastewater. Denitrification relies on slow endogenous decay of biomass (or supplemental carbon dosing like Micro-C) to reduce residual nitrate.
Re-aeration (Polishing) Zone : A small aerobic tank (10 to 30 minutes HRT) that strips entrained nitrogen ( N 2 N_2 N 2 ) gas bubbles from flocs (preventing clarifier rising sludge), re-oxygenates mixed liquor to 4.0 to 6.0 mg/L 4.0\text{ to } 6.0\text{ mg/L} 4.0 to 6.0 mg/L , and prevents secondary clarifier phosphorus release.
Effluent Performance : Consistently produces effluent Total Nitrogen < 3.0 mg/L <3.0\text{ mg/L} < 3.0 mg/L .
Biological & Chemical Phosphorus Removal
Phosphorus exists in wastewater primarily as soluble orthophosphate ( P O 4 3 − PO_4^{3-} P O 4 3 − ), polyphosphates, and organically bound phosphorus. Phosphorus removal can be achieved biologically, chemically, or through a hybrid approach. Enhanced Biological Phosphorus Removal (EBPR) Cycle:
- ┌────────────────────────────────────────────────────────┐
- ▼ │
- [ ANAEROBIC SELECTOR ] [ AEROBIC BASIN ]
- DO = 0.0, NO3 = 0.0 • DO > 2.0 mg/L
- PAOs consume VFAs (Acetate) • PAOs metabolize stored PHAs
- Store PHAs internally • "Luxury Uptake" of Orthophosphate
- Break Poly-P bonds ──► RELEASE PO43- INTO WATER • Store Poly-P granules ──► PURGE VIA WAS
- │ ▲
- └────────────────────────────────────────────────────────┘
- 1. Enhanced Biological Phosphorus Removal (EBPR)
Microbiology : Driven by Phosphorus Accumulating Organisms (PAOs) , predominantly Candidatus Accumulibacter phosphatis .
Anaerobic Selector Mechanism (DO = 0.0 mg/L, N O 3 − = 0.0 mg/L NO_3^- = 0.0\text{ mg/L} N O 3 − = 0.0 mg/L ) :
Under true anaerobic conditions (absence of both oxygen and nitrate), standard heterotrophs cannot function.
PAOs break high-energy intracellular polyphosphate bonds to generate cellular ATP energy.
PAOs use this energy to absorb Volatile Fatty Acids (VFAs) , such as acetic acid and propionic acid, and store them internally as polyhydroxyalkanoates (PHAs) / polyhydroxybutyrate (PHB).
In doing so, PAOs release orthophosphate ( P O 4 3 − PO_4^{3-} P O 4 3 − ) into the bulk solution , causing dissolved phosphorus concentrations in the anaerobic basin to spike up to 20 to 40 mg/L 20\text{ to } 40\text{ mg/L} 20 to 40 mg/L .
Aerobic Zone Mechanism (DO > 2.0 mg/L) :
In the presence of oxygen, PAOs metabolize their stored intracellular PHAs to generate copious energy for cellular growth.
PAOs perform luxury uptake of soluble orthophosphate from the bulk liquid, taking up substantially more phosphate than they released in the anaerobic zone.
Phosphate is polymerized into intracellular polyphosphate granules, increasing cellular phosphorus content from a normal bacterial level of 1.5%–2.0% up to 4.0% to 8.0% of dry cell weight .
Final Removal via WAS : Phosphorus is permanently removed from the treatment train by wasting phosphorus-rich biomass via Waste Activated Sludge (WAS) .
Crucial Operational Prerequisite : EBPR requires adequate influent VFAs (optimal ratio > 25 : 1 rbCOD:P >25:1\text{ rbCOD:P} > 25 : 1 rbCOD:P or > 10 : 1 VFA:P >10:1\text{ VFA:P} > 10 : 1 VFA:P ). In Arizona facilities, where hot sewers often consume sugars, on-site primary sludge fermenters are commonly used to generate VFAs.
2. Chemical Phosphorus Precipitation
When wastewater lacks sufficient VFAs for EBPR, or to polish effluent to ultra-low concentrations ( < 0.1 mg/L <0.1\text{ mg/L} < 0.1 mg/L Total Phosphorus), metal salts are dosed to precipitate insoluble metal phosphate complexes:
Aluminum Sulfate (Alum, A l 2 ( S O 4 ) 3 ⋅ 14 H 2 O Al_2(SO_4)_3 \cdot 14H_2O A l 2 ( S O 4 ) 3 ⋅ 14 H 2 O ) : A l 3 + + P O 4 3 − → A l P O 4 ↓ (Aluminum Phosphate) Al^{3+} + PO_4^{3-} \rightarrow AlPO_4\downarrow \text{ (Aluminum Phosphate)} A l 3 + + P O 4 3 − → A lP O 4 ↓ (Aluminum Phosphate)
Ferric Chloride ( F e C l 3 FeCl_3 F e C l 3 ) : F e 3 + + P O 4 3 − → F e P O 4 ↓ (Ferric Phosphate) Fe^{3+} + PO_4^{3-} \rightarrow FePO_4\downarrow \text{ (Ferric Phosphate)} F e 3 + + P O 4 3 − → F e P O 4 ↓ (Ferric Phosphate)
Practical Dosing Stoichiometry : While the theoretical molar ratio is 1 : 1 1:1 1 : 1 ( A l : P Al:P A l : P or F e : P Fe:P F e : P ), competing side reactions with natural wastewater alkalinity (precipitating A l ( O H ) 3 Al(OH)_3 A l ( O H ) 3 or F e ( O H ) 3 Fe(OH)_3 F e ( O H ) 3 ) necessitate an actual operational dosing molar ratio of 1.5 : 1 to 2.5 : 1 1.5:1\text{ to } 2.5:1 1.5 : 1 to 2.5 : 1 (equivalent to 2.0 to 3.5 lbs Fe per lb P 2.0\text{ to } 3.5\text{ lbs Fe per lb P} 2.0 to 3.5 lbs Fe per lb P removed, or 1.5 to 2.5 lbs Al per lb P 1.5\text{ to } 2.5\text{ lbs Al per lb P} 1.5 to 2.5 lbs Al per lb P removed).
Operational Impacts :
Sludge Production : Chemical precipitation increases total dry solids sludge production by 15% to 35% .
Alkalinity Depletion : Dosing acidic metal salts consumes natural alkalinity, depressing pH and risking nitrification failure if unmonitored.