Study guide

1.5 The WPI Need-to-Know Criteria: What Is Actually on Your Exam

Arizona Water/Wastewater Operator Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Arizona Regulatory Framework & ADEQ Certification

1.1 ADEQ Operator Certification Rules & Grade Structure 1.2 Facility Classification & Operator in Direct Responsible Charge (ODRC) 1.3 Arizona Aquifer Protection Permit (APP) Program & BADCT 1.4 AZPDES Surface Water Discharges & Arizona Reclaimed Water Standards 1.5 The WPI Need-to-Know Criteria: What Is Actually on Your Exam

2 Chapter 2: Federal Drinking Water & Clean Water Act Compliance

2.1 Safe Drinking Water Act (SDWA) Primary & Secondary MCLs 2.2 Surface Water Treatment Rules & Revised Total Coliform Rule (RTCR) 2.3 Stage 1 & Stage 2 Disinfectants/Disinfection Byproducts Rules (D/DBPR)

3 Chapter 3: Source Water Assessment, Wells & Watershed Protection

3.1 Groundwater Sources, Well Components & Water Level Measurement 3.2 Surface Water Sources, Intakes & Reservoir Management 3.3 Watershed Management, Contamination Sources & Public Education 3.4 Pretreatment: Aeration, Presedimentation & Algae Control

4 Chapter 4: Source Water Quality, Coagulation & Flocculation

4.1 Arizona Source Water Quality & Arid Climate Challenges 4.2 Coagulation Chemistry, Coagulants & Jar Testing 4.3 Flocculation Basin Design & Process Control 4.4 Sedimentation Basins, Clarifiers & Solids Contact Units

5 Chapter 5: Filtration Systems & Advanced Separation

5.1 Granular Media Filtration Principles & Media Types 5.2 Filter Backwash Operations, Ripening & Filter-to-Waste 5.3 Membrane Filtration & Reverse Osmosis Desalination 5.4 Ion Exchange Softening, Arsenic Removal & GAC Adsorption

6 Chapter 6: Drinking Water Disinfection & Chemical Oxidation

6.1 Chlorine Chemistry & Break-Point Chlorination 6.2 The CT Disinfection Concept & Basin Hydraulics 6.3 Alternative Disinfectants: Chloramines, Ozone, UV & Chlorine Dioxide

7 Chapter 7: Specialized Drinking Water Treatment & Chemical Conditioning

7.1 Iron & Manganese Removal 7.2 Fluoridation: Chemicals, Dosage & Safety 7.3 Corrosion Control, Saturation Indices & the Lead and Copper Rule 7.4 Water Treatment Plant Residuals Handling & Disposal

8 Chapter 8: Water Treatment Plant Equipment Operation & Maintenance

8.1 Raw Water Intake, Screening & Pumping Equipment 8.2 Chemical Feed Equipment, Storage & Metering 8.3 Instrumentation, Online Analyzers, SCADA & Calibration 8.4 Valves, Motors, Auxiliary Systems & Maintenance Programs

9 Chapter 9: Wastewater Preliminary, Primary & Biological Treatment Principles

9.1 Wastewater Characteristics & Preliminary Treatment 9.2 Primary Clarification Design & Settling Mechanics 9.3 Biological Treatment Kinetics & Microbiology

10 Chapter 10: Activated Sludge Processes & Nutrient Removal

10.1 Activated Sludge Configurations & Operational Mass Balance 10.2 Process Control Parameters, Settleability & Troubleshooting 10.3 Biological Nutrient Removal: Nitrification, Denitrification & Phosphorus Removal

11 Chapter 11: Fixed-Film, Lagoon & Advanced Secondary Processes

11.1 Trickling Filters & Attached Growth Fundamentals 11.2 Rotating Biological Contactors & Hybrid Processes 11.3 Stabilization Ponds & Lagoon Systems 11.4 Membrane Bioreactors

12 Chapter 12: Tertiary Treatment, Wastewater Disinfection & Effluent Management

12.1 Tertiary Filtration & Advanced Effluent Polishing 12.2 Wastewater Chlorination & Dechlorination 12.3 Ultraviolet & Ozone Disinfection of Wastewater 12.4 Effluent Disposal, Reclaimed Water Reuse & Permit Compliance

13 Chapter 13: Residuals Management & Sludge Processing

13.1 Sludge Thickening & Digestion Processes 13.2 Sludge Dewatering Technologies & Drying Beds 13.3 EPA Part 503 Biosolids Rules & Arizona Beneficial Use

14 Chapter 14: Wastewater Plant Equipment Operation & Maintenance

14.1 Preliminary & Primary Treatment Equipment 14.2 Aeration Systems, Blowers, Diffusers & Dissolved Oxygen Control 14.3 Wastewater Pumps, Mixers & Chemical Dosing Equipment 14.4 Electrical Systems, Online Analyzers & Auxiliary Power

15 Chapter 15: Water Distribution Infrastructure & Hydraulic Management

15.1 Water Main Materials, Fittings & Appurtenances 15.2 Water Storage, Pressure Management & Water Age 15.3 Cross-Connection Control & Backflow Prevention 15.4 Main Maintenance, Unidirectional Flushing & Leak Detection 15.5 Distribution Hydraulics, Head Loss & C-Factor 15.6 System Mapping, GIS, Plans & Distribution SCADA

16 Chapter 16: Water Main Installation, Repair & Disinfection

16.1 Main & Service Line Installation, Tapping & Thrust Restraint 16.2 New Construction Inspection, Pressure Testing & Utility Locating 16.3 Disinfection of Mains, Storage Facilities & Repaired Components 16.4 Booster Stations, Meters & Storage Facility Inspection

17 Chapter 17: Distribution Water Quality Management & Field Testing

17.1 Distribution Chemical Feed, Dosage Adjustment & Booster Chlorination 17.2 Distribution Sampling Programs & Field Analyses 17.3 Chemical Transport, Storage & Handling in Distribution Operations 17.4 Interpreting Water Quality Data, Complaints & Nitrification Control

18 Chapter 18: Wastewater Collection Systems & Lift Stations

18.1 Gravity Sewer Design, Piping Materials & Manholes 18.2 Inflow & Infiltration (I&I) Assessment & Pipeline Rehabilitation 18.3 Wastewater Lift Stations, Pump Types & Force Mains 18.4 Hydrogen Sulfide Corrosion, Odor Control & Line Cleaning 18.5 Excavation, Heavy Equipment & Surface Restoration

19 Chapter 19: Collection System Cleaning, Inspection & Rehabilitation

19.1 Hydraulic Cleaning, Rodding & Blockage Removal 19.2 CCTV Inspection, Condition Assessment & FOG Control 19.3 Trenchless Rehabilitation: CIPP, Pipe Bursting & Lining 19.4 SSO Response, Flow Monitoring & Capacity Assurance

20 Chapter 20: Laboratory Testing, Quality Control & Monitoring

20.1 Drinking Water Analytical Methods & Compliance Testing 20.2 Wastewater Laboratory Analytics & Process Control Tests 20.3 Sampling Protocols, Chain of Custody & Laboratory QA/QC 20.4 Emerging Contaminants, PFAS & Advanced Analytical Methods

21 Chapter 21: Utility Safety Programs & Emergency Preparedness

21.1 Lockout/Tagout, Electrical Safety & Arc Flash 21.2 Personal Protective Equipment, Fall Protection & Bloodborne Pathogens 21.3 Traffic Control & Work Zone Safety 21.4 Emergency Response Planning & Disaster Recovery 21.5 Heat Illness Prevention, Respiratory Protection & Hearing Conservation

22 Chapter 22: Security, Administration & Utility Management

22.1 Facility Security, Vulnerability Assessment & Cybersecurity 22.2 Recordkeeping, Standard Operating Procedures & Regulatory Reporting 22.3 Budgets, Procurement, Cost Analysis & Capital Improvement Planning 22.4 Asset Management, Energy Optimization & Water Loss Control 22.5 Supervision, Training, Customer Service & Public Communication

23 Chapter 23: Applied Operator Mathematics, Pumping Hydraulics & Utility Safety

23.1 Chemical Feed Calculations & Dosage Problem Solving 23.2 Geometric Volumes, Hydraulic Loading & Detention Time Math 23.3 Pumping Mechanics, System Head & Horsepower Calculations 23.4 Plant Safety: Confined Spaces, Chemical Hazards & OSHA Standards 23.5 Unit Conversions & Using the Supplied Formula/Conversion Table 23.6 Percent Removal, Process Efficiency & Solution Blending

1.5 The WPI Need-to-Know Criteria: What Is Actually on Your Exam

Key Takeaways Explain This Topic AI

Arizona administers the WPI (formerly ABC) standardized exams, and the 2025 Need-to-Know Criteria — 16 documents, one for each of the four disciplines at each of the four classes — are the only published blueprint, because ADEQ issues no content outline of its own.

Water Treatment Class IV weights 35 questions to Treatment Process, 20 to Equipment Operation and Maintenance, 17 to Laboratory Analysis, 14 to Source Water Characteristics, and 14 to Security, Safety and Administrative Procedures.

Wastewater Treatment Class IV puts 42 of 100 questions in Treatment Process Evaluation and Adjustment, making it the single heaviest content area in the entire Arizona exam family.

Security, Safety and Administrative Procedures appears on all four discipline exams and ranges from 14 to 26 questions, so it is never a low-value area to skip.

Every exam is 15 to 16 percent calculation items, and questions are presented in both US Standard and metric units with each item solvable independently in either.

Last updated: September 2026

1.5 The WPI Need-to-Know Criteria: What Is Actually on Your Exam

Most candidates who fail an Arizona operator exam do not fail because the material was too hard. They fail because they studied the wrong proportions — pouring weeks into Arizona statutes and treatment chemistry while giving a single evening to safety, administration, and equipment maintenance, which together can be a third of the test.

This section fixes that. It reproduces the official content-area weightings from the source that actually governs your exam.

The Blueprint Is a WPI Document, Not an ADEQ Document

ADEQ classifies facilities, sets eligibility, and issues certificates. It does not write exam questions or publish a content outline. Arizona uses the Water Professionals International (WPI) standardized exams — the organization formerly called the Association of Boards of Certification (ABC) — and the published blueprint is the Need-to-Know Criteria (NTK) .

There are 16 NTK documents relevant to Arizona: four disciplines (Water Treatment, Water Distribution, Wastewater Treatment, Wastewater Collection) times four classes (I, II, III, IV). Arizona currently administers the 2025 edition . Only the document matching your exact discipline and grade describes your exam.

Warning

Two traps follow from this. First, an "Arizona water operator practice test" that is heavy on A.R.S. and A.A.C. citations is testing the wrong thing — Arizona statutes are not a scored WPI content area. Study Arizona law to do your job legally and to pass ADEQ's application review; do not expect it as exam questions. Second, older NTK editions circulate widely online. Confirm you are working from the 2025 criteria.

The NTK is built from a periodic international job task analysis : WPI surveys working operators about what they actually do, then weights the exam so question counts mirror the criticality and frequency of real job tasks. That is why "Security, Safety, and Administrative Procedures" is large — operators really do spend a large share of their time on it.

Official Content Areas and Question Counts (Class IV Exams)

Each exam has 100 scored questions . The counts below are the published Class IV distributions. Lower classes cover the same content areas with fewer and simpler items and lighter emphasis on supervision and design.

Water Treatment Operator

  • Content Area Scored Questions Calculation Items
  • Treatment Process 35 6
  • Equipment Operation and Maintenance 20 5
  • Laboratory Analysis 17 2
  • Source Water Characteristics 14 1
  • Security, Safety, and Administrative Procedures 14 1
  • Total 100 15
  • Water Distribution Operator
  • Content Area Scored Questions Calculation Items
  • Water Quality Monitoring, Evaluation, Adjustment, and Laboratory Analysis/Interpretation 30 3
  • Security, Safety, Administrative Procedures, and Public Interactions 26 1
  • Distribution System Components 23 4
  • Equipment Installation, Operation, Maintenance, and Repair 21 8
  • Total 100 16
  • Wastewater Treatment Operator
  • Content Area Scored Questions Calculation Items
  • Treatment Process Evaluation and Adjustment 42 4
  • Equipment Evaluation, Maintenance, and/or Operation 28 7
  • Laboratory Analysis 15 0
  • Security, Safety, and Administrative Procedures 15 5
  • Total 100 16
  • Wastewater Collection Operator
  • Content Area Scored Questions Calculation Items
  • Equipment Operation, Evaluation, and Maintenance 23 3
  • Collection System Operation, Maintenance, and Restoration 23 5
  • Collection System Monitoring, Evaluation, and Adjustment 20 0
  • Security, Safety, and Administrative Procedures 18 7
  • Lift Station Operation and Maintenance 16 1
  • Total 100 16
  • What These Numbers Should Change About Your Study Plan

Read the tables as a budget:

Wastewater Treatment is dominated by process control. At 42 questions, "Treatment Process Evaluation and Adjustment" is worth more than laboratory and safety combined. If you are testing in W, activated sludge process control is the highest-leverage material in this entire guide.

Water Distribution is not primarily about pipes. The largest area (30 questions) is water quality monitoring, chemical feed, and laboratory interpretation. Candidates who study only mains, valves, and hydrants routinely under-prepare for the biggest block on their test.

Collection has a dedicated Lift Station area. Sixteen questions sit in lift stations alone, separate from the general equipment area — a level of emphasis that surprises candidates who treat lift stations as a footnote.

Safety and administration is never small. It ranges from 14 questions (Water Treatment) to 26 (Water Distribution). On the distribution exam it is the second-largest area.

Calculations are 15 to 16 percent everywhere, but they cluster differently. Water Distribution puts 8 of its 16 calculation items in equipment installation and repair; Wastewater Collection puts 7 of 16 in safety and administration — think cleaning production rates, costs, and staffing math, not treatment chemistry.

Loading diagram... WPI exam content areas by discipline (Class IV, 100 scored questions each)

How WPI Writes the Questions

The NTK defines exactly two cognitive levels, and knowing them changes how you study.

Recall items test simple recognition of a fact, concept, process, or procedure with little or no problem solving. You identify, recall, or recognize. WPI's own published example:

Although the required contact time for chlorine to kill bacteria may vary depending on certain water characteristics, the typical industry standard is: A. 15 minutes B. 30 minutes C. 45 minutes D. 60 minutes

Application items involve problem solving, calculation, or interpreting and applying data. You calculate, categorize, classify, compare, differentiate, explain, specify, or translate. WPI's published example:

In the activated sludge process, some of the activated sludge MUST be wasted to: A. increase digester gas production B. prevent excessive solids build-up C. prevent clogging of the sludge return line D. prevent overloading of sludge return pumps

Application items dominate. On the Class IV exams the split runs roughly 70 percent Application for Water Treatment, 72 percent for Water Distribution, 75 percent for Wastewater Treatment, and 80 percent for Wastewater Collection. Memorizing definitions is necessary but nowhere near sufficient; you must be able to reason from a scenario to an operational decision.

Dual Units on Every Calculation

WPI designs its exams for both the United States and Canada, so calculation items present US Standard units first and metric units in parentheses , and each item is solvable independently in either system. A published example:

If a water reservoir 12 ft (4 m) in diameter has a static water level of 21 ft (7 m), what is the pressure on the bottom of the tank? A. 6 psi (46 kPa) B. 9 psi (69 kPa) C. 12 psi (92 kPa) D. 21 psi (161 kPa)

Pick one unit system and stay in it for the whole problem. Mixing feet with kPa mid-calculation is the most common self-inflicted error on the math items. Here the US path is straightforward: 21 ft x 0.433 psi/ft = 9.1 psi, so the answer is 9 psi (69 kPa). Note that the 12 ft diameter is irrelevant — static pressure depends only on height, and WPI regularly includes an unused value to test whether you know that.

Approved References Behind the Questions

Every WPI question is referenced to peer-reviewed publications, primarily from California State University, Office of Water Programs (CSUS) , the American Water Works Association (AWWA) , and the Water Environment Federation (WEF) . The NTK publishes a primary and secondary reference per content area. For Class IV exams these include:

  • Discipline Principal references
  • Water Treatment CSUS Water Treatment Plant Operation Vol. 1 and 2; AWWA WSO Water Treatment Grades 2 and 3-4

Water Distribution CSUS Water Distribution System Operation & Maintenance 7th ed.; AWWA WSO Water Distribution Grades 1-2 and 3-4

Wastewater Treatment CSUS Operation of Wastewater Treatment Plants Vol. 1 and 2, 8th ed.; WEF Wastewater Treatment Fundamentals 1 and 3

Wastewater Collection CSUS Operation and Maintenance of Wastewater Collection Systems Vol. 1 and 2, 8th ed.

ADEQ notes that listing references is not an endorsement and that no single reference contains everything on an exam. ADEQ can also supply older editions of the certification exams for practice; contact the Operator Certification Program directly.

Note

The NTK documents themselves are copyrighted by WPI and may only be reproduced with written permission. Download your own copy from gowpi.org rather than relying on a third-party summary, and confirm the edition matches what Arizona is currently administering.