Study guide
20.3 Sampling Protocols, Chain of Custody & Laboratory QA/QC
Arizona Water/Wastewater Operator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Arizona Regulatory Framework & ADEQ Certification
1.1 ADEQ Operator Certification Rules & Grade Structure 1.2 Facility Classification & Operator in Direct Responsible Charge (ODRC) 1.3 Arizona Aquifer Protection Permit (APP) Program & BADCT 1.4 AZPDES Surface Water Discharges & Arizona Reclaimed Water Standards 1.5 The WPI Need-to-Know Criteria: What Is Actually on Your Exam
2 Chapter 2: Federal Drinking Water & Clean Water Act Compliance
2.1 Safe Drinking Water Act (SDWA) Primary & Secondary MCLs 2.2 Surface Water Treatment Rules & Revised Total Coliform Rule (RTCR) 2.3 Stage 1 & Stage 2 Disinfectants/Disinfection Byproducts Rules (D/DBPR)
3 Chapter 3: Source Water Assessment, Wells & Watershed Protection
3.1 Groundwater Sources, Well Components & Water Level Measurement 3.2 Surface Water Sources, Intakes & Reservoir Management 3.3 Watershed Management, Contamination Sources & Public Education 3.4 Pretreatment: Aeration, Presedimentation & Algae Control
4 Chapter 4: Source Water Quality, Coagulation & Flocculation
4.1 Arizona Source Water Quality & Arid Climate Challenges 4.2 Coagulation Chemistry, Coagulants & Jar Testing 4.3 Flocculation Basin Design & Process Control 4.4 Sedimentation Basins, Clarifiers & Solids Contact Units
5 Chapter 5: Filtration Systems & Advanced Separation
5.1 Granular Media Filtration Principles & Media Types 5.2 Filter Backwash Operations, Ripening & Filter-to-Waste 5.3 Membrane Filtration & Reverse Osmosis Desalination 5.4 Ion Exchange Softening, Arsenic Removal & GAC Adsorption
6 Chapter 6: Drinking Water Disinfection & Chemical Oxidation
6.1 Chlorine Chemistry & Break-Point Chlorination 6.2 The CT Disinfection Concept & Basin Hydraulics 6.3 Alternative Disinfectants: Chloramines, Ozone, UV & Chlorine Dioxide
7 Chapter 7: Specialized Drinking Water Treatment & Chemical Conditioning
7.1 Iron & Manganese Removal 7.2 Fluoridation: Chemicals, Dosage & Safety 7.3 Corrosion Control, Saturation Indices & the Lead and Copper Rule 7.4 Water Treatment Plant Residuals Handling & Disposal
8 Chapter 8: Water Treatment Plant Equipment Operation & Maintenance
8.1 Raw Water Intake, Screening & Pumping Equipment 8.2 Chemical Feed Equipment, Storage & Metering 8.3 Instrumentation, Online Analyzers, SCADA & Calibration 8.4 Valves, Motors, Auxiliary Systems & Maintenance Programs
9 Chapter 9: Wastewater Preliminary, Primary & Biological Treatment Principles
9.1 Wastewater Characteristics & Preliminary Treatment 9.2 Primary Clarification Design & Settling Mechanics 9.3 Biological Treatment Kinetics & Microbiology
10 Chapter 10: Activated Sludge Processes & Nutrient Removal
10.1 Activated Sludge Configurations & Operational Mass Balance 10.2 Process Control Parameters, Settleability & Troubleshooting 10.3 Biological Nutrient Removal: Nitrification, Denitrification & Phosphorus Removal
11 Chapter 11: Fixed-Film, Lagoon & Advanced Secondary Processes
11.1 Trickling Filters & Attached Growth Fundamentals 11.2 Rotating Biological Contactors & Hybrid Processes 11.3 Stabilization Ponds & Lagoon Systems 11.4 Membrane Bioreactors
12 Chapter 12: Tertiary Treatment, Wastewater Disinfection & Effluent Management
12.1 Tertiary Filtration & Advanced Effluent Polishing 12.2 Wastewater Chlorination & Dechlorination 12.3 Ultraviolet & Ozone Disinfection of Wastewater 12.4 Effluent Disposal, Reclaimed Water Reuse & Permit Compliance
13 Chapter 13: Residuals Management & Sludge Processing
13.1 Sludge Thickening & Digestion Processes 13.2 Sludge Dewatering Technologies & Drying Beds 13.3 EPA Part 503 Biosolids Rules & Arizona Beneficial Use
14 Chapter 14: Wastewater Plant Equipment Operation & Maintenance
14.1 Preliminary & Primary Treatment Equipment 14.2 Aeration Systems, Blowers, Diffusers & Dissolved Oxygen Control 14.3 Wastewater Pumps, Mixers & Chemical Dosing Equipment 14.4 Electrical Systems, Online Analyzers & Auxiliary Power
15 Chapter 15: Water Distribution Infrastructure & Hydraulic Management
15.1 Water Main Materials, Fittings & Appurtenances 15.2 Water Storage, Pressure Management & Water Age 15.3 Cross-Connection Control & Backflow Prevention 15.4 Main Maintenance, Unidirectional Flushing & Leak Detection 15.5 Distribution Hydraulics, Head Loss & C-Factor 15.6 System Mapping, GIS, Plans & Distribution SCADA
16 Chapter 16: Water Main Installation, Repair & Disinfection
16.1 Main & Service Line Installation, Tapping & Thrust Restraint 16.2 New Construction Inspection, Pressure Testing & Utility Locating 16.3 Disinfection of Mains, Storage Facilities & Repaired Components 16.4 Booster Stations, Meters & Storage Facility Inspection
17 Chapter 17: Distribution Water Quality Management & Field Testing
17.1 Distribution Chemical Feed, Dosage Adjustment & Booster Chlorination 17.2 Distribution Sampling Programs & Field Analyses 17.3 Chemical Transport, Storage & Handling in Distribution Operations 17.4 Interpreting Water Quality Data, Complaints & Nitrification Control
18 Chapter 18: Wastewater Collection Systems & Lift Stations
18.1 Gravity Sewer Design, Piping Materials & Manholes 18.2 Inflow & Infiltration (I&I) Assessment & Pipeline Rehabilitation 18.3 Wastewater Lift Stations, Pump Types & Force Mains 18.4 Hydrogen Sulfide Corrosion, Odor Control & Line Cleaning 18.5 Excavation, Heavy Equipment & Surface Restoration
19 Chapter 19: Collection System Cleaning, Inspection & Rehabilitation
19.1 Hydraulic Cleaning, Rodding & Blockage Removal 19.2 CCTV Inspection, Condition Assessment & FOG Control 19.3 Trenchless Rehabilitation: CIPP, Pipe Bursting & Lining 19.4 SSO Response, Flow Monitoring & Capacity Assurance
20 Chapter 20: Laboratory Testing, Quality Control & Monitoring
20.1 Drinking Water Analytical Methods & Compliance Testing 20.2 Wastewater Laboratory Analytics & Process Control Tests 20.3 Sampling Protocols, Chain of Custody & Laboratory QA/QC 20.4 Emerging Contaminants, PFAS & Advanced Analytical Methods
21 Chapter 21: Utility Safety Programs & Emergency Preparedness
21.1 Lockout/Tagout, Electrical Safety & Arc Flash 21.2 Personal Protective Equipment, Fall Protection & Bloodborne Pathogens 21.3 Traffic Control & Work Zone Safety 21.4 Emergency Response Planning & Disaster Recovery 21.5 Heat Illness Prevention, Respiratory Protection & Hearing Conservation
22 Chapter 22: Security, Administration & Utility Management
22.1 Facility Security, Vulnerability Assessment & Cybersecurity 22.2 Recordkeeping, Standard Operating Procedures & Regulatory Reporting 22.3 Budgets, Procurement, Cost Analysis & Capital Improvement Planning 22.4 Asset Management, Energy Optimization & Water Loss Control 22.5 Supervision, Training, Customer Service & Public Communication
23 Chapter 23: Applied Operator Mathematics, Pumping Hydraulics & Utility Safety
23.1 Chemical Feed Calculations & Dosage Problem Solving 23.2 Geometric Volumes, Hydraulic Loading & Detention Time Math 23.3 Pumping Mechanics, System Head & Horsepower Calculations 23.4 Plant Safety: Confined Spaces, Chemical Hazards & OSHA Standards 23.5 Unit Conversions & Using the Supplied Formula/Conversion Table 23.6 Percent Removal, Process Efficiency & Solution Blending
20.3 Sampling Protocols, Chain of Custody & Laboratory QA/QC
Key Takeaways Explain This Topic AI
Grab sampling is legally mandatory for parameters subject to rapid physical, biological, or chemical alteration (pH, temperature, DO, chlorine residual, coliforms, VOCs, and oil/grease), whereas composite sampling captures daily mass loading for BOD, TSS, nutrients, and metals.
Sample preservation requires immediate cooling to ≤ 6°C on wet ice and parameter-specific chemical fixatives: H2SO4 to pH < 2 for nutrients and COD, HNO3 to pH < 2 for trace metals, and NaOH to pH > 12 for cyanides.
Maximum regulatory holding times range from 15 minutes for field parameters (pH, DO, residual chlorine) and 6 hours for drinking water coliforms, to 48 hours for BOD, 7 days for TSS, and 6 months for preserved trace metals.
Chain of Custody (COC) documentation establishes legal evidentiary defensibility through an unbroken custody log detailing sample origin, collector signatures, preservatives, requested methods, and temperature verification upon laboratory receipt.
Laboratory QA/QC verifies accuracy and precision through method blanks (< MDL), Laboratory Control Samples (85–115% recovery), Matrix Spikes evaluating matrix interference, and duplicate analyses quantified via Relative Percent Difference (RPD).
Last updated: September 2026
20.3 Sampling Protocols, Chain of Custody & Laboratory QA/QC
Note
Legal Defensibility & Arizona Standards : Under A.R.S. Title 49 (The Arizona Environmental Quality Act), laboratory data generated for compliance reporting under the Safe Drinking Water Act (SDWA) or Arizona Pollutant Discharge Elimination System (AZPDES) must be legally defensible. A laboratory analysis is only as valid as the integrity of the sample collected in the field. Non-compliance with approved EPA 40 CFR Part 136 preservation methods, holding times, or chain-of-custody documentation renders test results inadmissible and triggers civil enforcement penalties.
Water and wastewater operators routinely collect samples that represent millions of gallons of daily flow. Because physical and biological matrices change continuously through biological decay, chemical volatilization, and gas absorption, operators must implement standardized sampling protocols, chemical preservation routines, and rigorous quality assurance and quality control (QA/QC) programs.
Grab vs. Composite Sampling Methodologies
The choice between grab and composite sampling is determined by the physical-chemical stability of the target analyte and regulatory permit requirements. +-----------------------------------------------------------------------------------+
- | Sampling Methodology Comparison |
- +-----------------------------------------------------------------------------------+
- | 1. Grab Samples : Discrete single aliquot collected at a specific point in |
- | time and space. Captures instantaneous conditions. |
- | MANDATORY FOR: pH, Temp, DO, Residual Chlorine, Coliforms, |
- | Volatile Organic Compounds (VOCs), Oil & Grease (HEM). |
- | |
- | 2. Composite Samples : Multiple discrete aliquots collected over 24 hours. |
- | Captures average mass loading and diurnal variability. |
- | MANDATORY FOR: BOD5, CBOD5, TSS, Total N, Total P, Metals. |
- +-----------------------------------------------------------------------------------+
- Mandatory Grab Sampling Parameters
A grab sample represents the exact characteristics of the water matrix at the instant of collection. Regulations prohibit compositing for parameters that degrade, volatilize, or adhere to collection tubing:
Dissolved Gases & Field Parameters : pH, temperature, and dissolved oxygen degrade within seconds to minutes due to carbon dioxide exchange, atmospheric oxygen absorption, and ambient heat transfer. Analysis must occur within 15 minutes.
Disinfectant Residuals : Free and total chlorine decompose rapidly under solar ultraviolet radiation and through demand reactions with organic compounds.
Microbiological Indicators : Total Coliforms, E. coli , and enterococci multiply or undergo die-off when held in composite collection jugs at fluctuating temperatures.
Volatile Organic Compounds (VOCs) : Benzene, toluene, trichloroethylene (TCE), and trihalomethanes volatilize into headspace if subjected to peristaltic pump vacuum or multi-aliquot pouring.
Oil & Grease (Hexane Extractable Materials, HEM) : Hydrocarbons adhere tenaciously to the plastic tubing, carboy walls, and glass pump chambers of automated composite samplers, resulting in severe negative bias. Oil and grease must always be collected as discrete grabs in clean, wide-mouth amber glass bottles with PTFE-lined caps.
Composite Sampling: Time-Proportional vs. Flow-Proportional
Composite samples consist of individual sample aliquots (sub-samples) collected over a standardized 24-hour cycle :
Time-Proportional Compositing : Collects a fixed aliquot volume at regular, predetermined time intervals (e.g., 200 mL collected every 60 minutes for 24 hours). This approach is acceptable only where wastewater flow rates remain relatively uniform and unvarying throughout the day.
Flow-Proportional Compositing : Required by AZPDES permits for municipal wastewater treatment facilities experiencing diurnal flow swings:
Method A (Flow-Variable Volume) : Aliquots are taken at constant time intervals (e.g., every 30 minutes), but the volume of each aliquot varies directly with instantaneous flow measured by a primary metering flume or weir.
Method B (Constant Volume, Flow-Paced Time) : A uniform aliquot volume (e.g., 200 mL) is collected at variable time intervals triggered every time a set volume of wastewater (e.g., 50,000 gallons) passes the totalizing flow meter.
Mass Loading Calculation : Flow-proportional compositing is vital because regulatory discharge limits are expressed both as concentrations (mg/L) and mass discharge rates (pounds per day): Mass Loading (lbs/day) = Flow (MGD) × Concentration (mg/L) × 8.34 \text{Mass Loading (lbs/day)} = \text{Flow (MGD)} \times \text{Concentration (mg/L)} \times 8.34 Mass Loading (lbs/day) = Flow (MGD) × Concentration (mg/L) × 8.34
Sample Preservation, Chemical Fixatives & Maximum Holding Times
Preservation techniques retard biological action, chemical hydrolysis, precipitation of dissolved metals, and physical adsorption onto container surfaces during transit.
Regulatory Preservation and Storage Standards (EPA 40 CFR Part 136)
Parameter / Analyte Preservative / Chemical Fixative Container Material Maximum Holding Time
pH, Temperature, DO, Chlorine Residual None allowed; analyze immediately in field Glass or Plastic (HDPE) 15 minutes
Coliform Bacteria (Drinking Water) Sodium thiosulfate ( N a 2 S 2 O 3 Na_2S_2O_3 N a 2 S 2 O 3 , ~100 mg/L) + Cool on wet ice ≤ 10°C Sterile Polystyrene / Polypropylene 6 hours (ADEQ compliance) / 30 hrs absolute
Coliform Bacteria (Wastewater Effluent) Sodium thiosulfate ( N a 2 S 2 O 3 Na_2S_2O_3 N a 2 S 2 O 3 ) + Cool on wet ice ≤ 6°C Sterile Plastic or Glass 8 hours
Biochemical Oxygen Demand ( B O D 5 / C B O D 5 BOD_5 / CBOD_5 BO D 5 / CBO D 5 ) Cool on wet ice ≤ 6°C (never freeze) Plastic or Glass 48 hours
- Total Suspended Solids (TSS / TVSS) Cool on wet ice ≤ 6°C Plastic or Glass 7 days
- Total Dissolved Solids (TDS) Cool on wet ice ≤ 6°C Plastic or Glass 7 days
Nutrients: Ammonia, Nitrate+Nitrite, TKN, Total P Sulfuric acid ( H 2 S O 4 H_2SO_4 H 2 S O 4 ) to pH < 2.0 + Cool ≤ 6°C Plastic or Glass 28 days
Chemical Oxygen Demand (COD) Sulfuric acid ( H 2 S O 4 H_2SO_4 H 2 S O 4 ) to pH < 2.0 + Cool ≤ 6°C Glass preferred 28 days
Oil and Grease (HEM) Sulfuric acid ( H 2 S O 4 H_2SO_4 H 2 S O 4 ) or H C l HCl H Cl to pH < 2.0 + Cool ≤ 6°C Wide-mouth Amber Glass only with PTFE-lined cap 28 days
Total Metals (As, Cd, Cr, Cu, Pb, Ni, Zn) Concentrated Nitric acid ( H N O 3 HNO_3 H N O 3 ) to pH < 2.0 (no refrigeration required) Polyethylene (HDPE) or Fluoropolymer 6 months (180 days)
Mercury (Total) Concentrated Nitric acid ( H N O 3 HNO_3 H N O 3 ) to pH < 2.0 + Cool ≤ 6°C Glass or PTFE 28 days
Total Cyanide Sodium hydroxide ( N a O H NaOH N a O H ) to pH > 12.0 + Cool ≤ 6°C (plus ascorbic acid if chlorine present) Plastic or Glass 14 days
Chemical Fixative Mechanisms
Refrigeration (Wet Ice at ≤ 6°C) : Retards biological metabolic kinetics (halving microbial respiration for every 10°C drop) without rupturing cellular walls. Freezing is strictly prohibited for BOD, TSS, and bacteriological testing because ice crystals lyse bacterial cells and alter floc structures.
Sodium Thiosulfate ( N a 2 S 2 O 3 Na_2S_2O_3 N a 2 S 2 O 3 ) : Neutralizes free and combined chlorine residuals ( N a 2 S 2 O 3 + 4 C l 2 + 5 H 2 O → 2 N a H S O 4 + 8 H C l Na_2S_2O_3 + 4 Cl_2 + 5 H_2O \rightarrow 2 NaHSO_4 + 8 HCl N a 2 S 2 O 3 + 4 C l 2 + 5 H 2 O → 2 N a H S O 4 + 8 H Cl ), preventing continuing disinfection during transit.
Sulfuric Acid ( H 2 S O 4 H_2SO_4 H 2 S O 4 to pH < 2) : Halts all cellular respiration and enzymatic hydrolysis in nutrient and COD samples, keeping ammonia, nitrate, and phosphates stabilized.
Nitric Acid ( H N O 3 HNO_3 H N O 3 to pH < 2) : Maintains metallic elements as free, dissolved cations in solution, preventing hydrolysis into insoluble metal hydroxides and stopping metal ions from adsorbing onto the container walls.
Sodium Hydroxide ( N a O H NaOH N a O H to pH > 12) : Prevents toxic hydrogen cyanide ( H C N HCN H CN ) gas volatilization by keeping the species locked in the non-volatile cyanide ion ( C N − CN^- C N − ) state.
Chain of Custody (COC) Documentation
A Chain of Custody (COC) is a legally binding document that establishes an unbroken, documented trail of accountability for sample identification, collection, possession, transfer, and analytical processing. +-----------------------------------------------------------------------------------+
- | Legal Criteria for Sample Custody |
- +-----------------------------------------------------------------------------------+
- | A sample is officially in legal custody if it satisfies ANY of these conditions: |
- | 1. It is in the collector's actual physical possession. |
- | 2. It is in the collector's direct visual sight after being in physical possession.|
- | 3. It is secured in a locked area, vehicle, or locker to prevent tampering. |
- | 4. It is placed in a designated secure storage area with restricted access, or |
- | sealed inside a transport cooler with intact, tamper-evident custody tape. |
- +-----------------------------------------------------------------------------------+
- Mandatory Fields on a Legal COC Form
Unique Sample Identification Number : Cross-referenced exactly to sample bottle labels.
Date and Time of Collection : Recorded in military time (e.g., 14:25) or clearly designated AM/PM.
Sampling Location Description : Explicit description (e.g., "Central WWTP Outfall 001 Final Effluent Weir").
Sample Matrix : Clearly specified as potable water, non-potable surface water, untreated raw sewage, secondary effluent, or dewatered biosolids cake.
Sample Type : Designated as discrete Grab or 24-hour Composite.
Chemical Preservatives Used : Documenting added fixatives ( H N O 3 HNO_3 H N O 3 , H 2 S O 4 H_2SO_4 H 2 S O 4 , N a O H NaOH N a O H , N a 2 S 2 O 3 Na_2S_2O_3 N a 2 S 2 O 3 , ice) and recorded field pH checks.
Requested Analytical Parameters & EPA Methods : Explicit test codes (e.g., EPA 180.1 Turbidity, SM 5210 B BOD5, EPA 200.7 Total Metals).
Relinquishing and Receiving Signatures : Every physical transfer must include the printed name, original signature, organization, date, and exact time of both the party relinquishing and the party receiving the samples.
Cooler Receipt Temperature : Upon delivery at the laboratory, receiving personnel must check and record the interior cooler temperature using a calibrated infrared thermometer or by measuring an included Temperature Blank bottle . If the temperature exceeds 6°C (or 10°C for drinking water coliforms), the laboratory must flag all analytical data as compromised or reject the shipment.
Laboratory Quality Assurance & Quality Control (QA/QC)
Quality Assurance (QA) is the overall management program guaranteeing data integrity (SOPs, technician training, instrumentation service contracts). Quality Control (QC) represents the specific analytical techniques used to measure and verify laboratory precision and accuracy. +-----------------------------------------------------------------------------------+
- | Laboratory QC Toolset |
- +-----------------------------------------------------------------------------------+
- | 1. Method Blank (LRB) : Deionized water processed through entire analytical run. |
- | Evaluates reagent purity and glassware contamination. |
- | 2. Lab Control Sample : Certified standard in clean matrix (85% to 115% recovery).|
- | Evaluates analytical accuracy without matrix interference.|
- | 3. Matrix Spike (MS) : Known analyte added to actual environmental sample. |
- | Evaluates matrix interferences and recovery percentage. |
- | 4. Duplicate (RPD) : Split sample analyzed in duplicate. |
- | Evaluates analytical precision and repeatability. |
- +-----------------------------------------------------------------------------------+
- 1. Method Blanks (Laboratory Reagent Blank, LRB)
An aliquot of analyte-free reagent water is processed through all preparation, digestion, filtration, and analytical steps identically to real samples. A method blank detects background contamination from dirty glassware, impure chemical reagents, or laboratory atmospheric dust. The method blank result must remain below the Method Detection Limit (MDL) . If analyte is detected in the blank, all associated sample results must be qualified or re-analyzed.
2. Laboratory Control Samples (LCS / Known Standard)
An LCS consists of a clean reagent water matrix spiked with a known concentration of target analyte obtained from an independent, secondary certified reference standard. The LCS verifies instrument calibration accuracy and analyst performance without interference from the sample matrix. Target recovery typically falls between 85% and 115% .
3. Matrix Spikes (MS) & Percent Recovery
A matrix spike assesses whether components within an environmental sample (high dissolved salts, industrial surfactants, suspended clays) interfere with analyte recovery:
An actual field sample aliquot is split in two.
One aliquot is analyzed unspiked ( C unspiked C_{\text{unspiked}} C unspiked ).
A known quantity of target analyte ( C added C_{\text{added}} C added ) is added to the second aliquot, which is analyzed ( C spiked C_{\text{spiked}} C spiked ). % Recovery = C spiked − C unspiked C added × 100 % \% \text{ Recovery} = \frac{C_{\text{spiked}} - C_{\text{unspiked}}}{C_{\text{added}}} \times 100\% % Recovery = C added C spiked − C unspiked × 100%
Acceptable Criteria : Recovery generally must fall between 70% and 130% (or 80% to 120% depending on parameter). A recovery below 70% indicates negative matrix suppression; recovery above 130% indicates positive matrix enhancement.
4. Duplicate Samples & Relative Percent Difference (RPD)
Duplicate samples (field duplicates or laboratory sample duplicates) evaluate analytical precision and repeatability: RPD (%) = ∣ D 1 − D 2 ∣ ( D 1 + D 2 2 ) × 100 % \text{RPD (\%)} = \frac{|D_1 - D_2|}{\left( \frac{D_1 + D_2}{2} \right)} \times 100\% RPD (%) = ( 2 D 1 + D 2 ) ∣ D 1 − D 2 ∣ × 100%
Where D 1 D_1 D 1 is the first sample concentration and D 2 D_2 D 2 is the duplicate concentration. Typical acceptance limits require an RPD < 10% to 20% for concentrations well above the detection limit.
5. Multi-Point Calibration Verification Curves
Instruments (spectrophotometers, ICP-MS, ion chromatographs) must be calibrated using a minimum of 3 to 5 calibration standards across the linear dynamic range plus a blank. The calculated linear regression line must demonstrate a correlation coefficient ( r r r ) ≥ 0.995 \ge 0.995 ≥ 0.995 (or coefficient of determination r 2 ≥ 0.990 r^2 \ge 0.990 r 2 ≥ 0.990 ). Calibration stability is verified during testing by analyzing a Continuing Calibration Verification (CCV) standard every 10 injections.
Toxicity Characteristic Leaching Procedure (TCLP, EPA Method 1311)
Wastewater treatment processes generate significant quantities of biological sludge (biosolids). Under ADEQ rules and the federal Resource Conservation and Recovery Act (RCRA, 40 CFR Part 261), treatment works must verify that dewatered biosolids are non-hazardous prior to disposal in municipal solid waste landfills or agricultural land application.
Analytical Extraction Protocol
The TCLP test (EPA Method 1311) simulates the harsh leaching conditions inside an unlined municipal sanitary landfill, where decomposing refuse generates acidic municipal leachate (acetic acid):
Particle Size Reduction : Dewatered biosolids cake must pass through a 9.5 mm standard sieve.
Extraction Fluid : Formulated with dilute acetic acid buffer adjusted to pH 4.93 ± 0.05 (Fluid #1) or pH 2.88 ± 0.05 (Fluid #2, for highly alkaline samples).
Agitation : The solid sample is placed in a zero-headspace extractor or extraction vessel with a 20:1 liquid-to-solid ratio (20 mL extraction fluid per 1.0 gram of dry solid) . The vessel is rotated end-over-end in a rotary agitation device at 30 ± 2 rpm for 18 ± 2 hours at 23°C ± 2°C .
Filtration and Analysis : The liquid extract is separated from solids using a 0.6 to 0.8 µm borosilicate glass fiber filter and analyzed for hazardous contaminants.
The 8 RCRA Heavy Metals and Regulatory Action Thresholds
If the leachate concentration exceeds any of the following regulatory limits, the biosolids cake is legally classified as hazardous waste and cannot be accepted at a standard municipal landfill:
- RCRA Toxic Metal EPA Waste Code Maximum Regulatory TCLP Limit (mg/L)
- Arsenic (As) D004 5.0 mg/L
- Barium (Ba) D005 100.0 mg/L
- Cadmium (Cd) D006 1.0 mg/L
- Chromium (Cr) D007 5.0 mg/L
- Lead (Pb) D008 5.0 mg/L
- Mercury (Hg) D009 0.2 mg/L
- Selenium (Se) D010 1.0 mg/L
- Silver (Ag) D011 5.0 mg/L