Study guide
13.3 EPA Part 503 Biosolids Rules & Arizona Beneficial Use
Arizona Water/Wastewater Operator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Arizona Regulatory Framework & ADEQ Certification
1.1 ADEQ Operator Certification Rules & Grade Structure 1.2 Facility Classification & Operator in Direct Responsible Charge (ODRC) 1.3 Arizona Aquifer Protection Permit (APP) Program & BADCT 1.4 AZPDES Surface Water Discharges & Arizona Reclaimed Water Standards 1.5 The WPI Need-to-Know Criteria: What Is Actually on Your Exam
2 Chapter 2: Federal Drinking Water & Clean Water Act Compliance
2.1 Safe Drinking Water Act (SDWA) Primary & Secondary MCLs 2.2 Surface Water Treatment Rules & Revised Total Coliform Rule (RTCR) 2.3 Stage 1 & Stage 2 Disinfectants/Disinfection Byproducts Rules (D/DBPR)
3 Chapter 3: Source Water Assessment, Wells & Watershed Protection
3.1 Groundwater Sources, Well Components & Water Level Measurement 3.2 Surface Water Sources, Intakes & Reservoir Management 3.3 Watershed Management, Contamination Sources & Public Education 3.4 Pretreatment: Aeration, Presedimentation & Algae Control
4 Chapter 4: Source Water Quality, Coagulation & Flocculation
4.1 Arizona Source Water Quality & Arid Climate Challenges 4.2 Coagulation Chemistry, Coagulants & Jar Testing 4.3 Flocculation Basin Design & Process Control 4.4 Sedimentation Basins, Clarifiers & Solids Contact Units
5 Chapter 5: Filtration Systems & Advanced Separation
5.1 Granular Media Filtration Principles & Media Types 5.2 Filter Backwash Operations, Ripening & Filter-to-Waste 5.3 Membrane Filtration & Reverse Osmosis Desalination 5.4 Ion Exchange Softening, Arsenic Removal & GAC Adsorption
6 Chapter 6: Drinking Water Disinfection & Chemical Oxidation
6.1 Chlorine Chemistry & Break-Point Chlorination 6.2 The CT Disinfection Concept & Basin Hydraulics 6.3 Alternative Disinfectants: Chloramines, Ozone, UV & Chlorine Dioxide
7 Chapter 7: Specialized Drinking Water Treatment & Chemical Conditioning
7.1 Iron & Manganese Removal 7.2 Fluoridation: Chemicals, Dosage & Safety 7.3 Corrosion Control, Saturation Indices & the Lead and Copper Rule 7.4 Water Treatment Plant Residuals Handling & Disposal
8 Chapter 8: Water Treatment Plant Equipment Operation & Maintenance
8.1 Raw Water Intake, Screening & Pumping Equipment 8.2 Chemical Feed Equipment, Storage & Metering 8.3 Instrumentation, Online Analyzers, SCADA & Calibration 8.4 Valves, Motors, Auxiliary Systems & Maintenance Programs
9 Chapter 9: Wastewater Preliminary, Primary & Biological Treatment Principles
9.1 Wastewater Characteristics & Preliminary Treatment 9.2 Primary Clarification Design & Settling Mechanics 9.3 Biological Treatment Kinetics & Microbiology
10 Chapter 10: Activated Sludge Processes & Nutrient Removal
10.1 Activated Sludge Configurations & Operational Mass Balance 10.2 Process Control Parameters, Settleability & Troubleshooting 10.3 Biological Nutrient Removal: Nitrification, Denitrification & Phosphorus Removal
11 Chapter 11: Fixed-Film, Lagoon & Advanced Secondary Processes
11.1 Trickling Filters & Attached Growth Fundamentals 11.2 Rotating Biological Contactors & Hybrid Processes 11.3 Stabilization Ponds & Lagoon Systems 11.4 Membrane Bioreactors
12 Chapter 12: Tertiary Treatment, Wastewater Disinfection & Effluent Management
12.1 Tertiary Filtration & Advanced Effluent Polishing 12.2 Wastewater Chlorination & Dechlorination 12.3 Ultraviolet & Ozone Disinfection of Wastewater 12.4 Effluent Disposal, Reclaimed Water Reuse & Permit Compliance
13 Chapter 13: Residuals Management & Sludge Processing
13.1 Sludge Thickening & Digestion Processes 13.2 Sludge Dewatering Technologies & Drying Beds 13.3 EPA Part 503 Biosolids Rules & Arizona Beneficial Use
14 Chapter 14: Wastewater Plant Equipment Operation & Maintenance
14.1 Preliminary & Primary Treatment Equipment 14.2 Aeration Systems, Blowers, Diffusers & Dissolved Oxygen Control 14.3 Wastewater Pumps, Mixers & Chemical Dosing Equipment 14.4 Electrical Systems, Online Analyzers & Auxiliary Power
15 Chapter 15: Water Distribution Infrastructure & Hydraulic Management
15.1 Water Main Materials, Fittings & Appurtenances 15.2 Water Storage, Pressure Management & Water Age 15.3 Cross-Connection Control & Backflow Prevention 15.4 Main Maintenance, Unidirectional Flushing & Leak Detection 15.5 Distribution Hydraulics, Head Loss & C-Factor 15.6 System Mapping, GIS, Plans & Distribution SCADA
16 Chapter 16: Water Main Installation, Repair & Disinfection
16.1 Main & Service Line Installation, Tapping & Thrust Restraint 16.2 New Construction Inspection, Pressure Testing & Utility Locating 16.3 Disinfection of Mains, Storage Facilities & Repaired Components 16.4 Booster Stations, Meters & Storage Facility Inspection
17 Chapter 17: Distribution Water Quality Management & Field Testing
17.1 Distribution Chemical Feed, Dosage Adjustment & Booster Chlorination 17.2 Distribution Sampling Programs & Field Analyses 17.3 Chemical Transport, Storage & Handling in Distribution Operations 17.4 Interpreting Water Quality Data, Complaints & Nitrification Control
18 Chapter 18: Wastewater Collection Systems & Lift Stations
18.1 Gravity Sewer Design, Piping Materials & Manholes 18.2 Inflow & Infiltration (I&I) Assessment & Pipeline Rehabilitation 18.3 Wastewater Lift Stations, Pump Types & Force Mains 18.4 Hydrogen Sulfide Corrosion, Odor Control & Line Cleaning 18.5 Excavation, Heavy Equipment & Surface Restoration
19 Chapter 19: Collection System Cleaning, Inspection & Rehabilitation
19.1 Hydraulic Cleaning, Rodding & Blockage Removal 19.2 CCTV Inspection, Condition Assessment & FOG Control 19.3 Trenchless Rehabilitation: CIPP, Pipe Bursting & Lining 19.4 SSO Response, Flow Monitoring & Capacity Assurance
20 Chapter 20: Laboratory Testing, Quality Control & Monitoring
20.1 Drinking Water Analytical Methods & Compliance Testing 20.2 Wastewater Laboratory Analytics & Process Control Tests 20.3 Sampling Protocols, Chain of Custody & Laboratory QA/QC 20.4 Emerging Contaminants, PFAS & Advanced Analytical Methods
21 Chapter 21: Utility Safety Programs & Emergency Preparedness
21.1 Lockout/Tagout, Electrical Safety & Arc Flash 21.2 Personal Protective Equipment, Fall Protection & Bloodborne Pathogens 21.3 Traffic Control & Work Zone Safety 21.4 Emergency Response Planning & Disaster Recovery 21.5 Heat Illness Prevention, Respiratory Protection & Hearing Conservation
22 Chapter 22: Security, Administration & Utility Management
22.1 Facility Security, Vulnerability Assessment & Cybersecurity 22.2 Recordkeeping, Standard Operating Procedures & Regulatory Reporting 22.3 Budgets, Procurement, Cost Analysis & Capital Improvement Planning 22.4 Asset Management, Energy Optimization & Water Loss Control 22.5 Supervision, Training, Customer Service & Public Communication
23 Chapter 23: Applied Operator Mathematics, Pumping Hydraulics & Utility Safety
23.1 Chemical Feed Calculations & Dosage Problem Solving 23.2 Geometric Volumes, Hydraulic Loading & Detention Time Math 23.3 Pumping Mechanics, System Head & Horsepower Calculations 23.4 Plant Safety: Confined Spaces, Chemical Hazards & OSHA Standards 23.5 Unit Conversions & Using the Supplied Formula/Conversion Table 23.6 Percent Removal, Process Efficiency & Solution Blending
13.3 EPA Part 503 Biosolids Rules & Arizona Beneficial Use
Key Takeaways Explain This Topic AI
Biosolids recycling in Arizona is co-regulated under federal EPA 40 CFR Part 503 and state ADEQ Aquifer Protection Permit (APP) rules (A.A.C. Title 18, Chapter 9), establishing standards for pathogen destruction, vector attraction reduction, and heavy metal accumulation.
Class A Biosolids require pathogen densities below detectable limits (fecal coliform <1,000 MPN/g dry solids or Salmonella sp. <3 MPN/4g dry solids) via Processes to Further Reduce Pathogens (PFRP), qualifying them for unrestricted public distribution, home lawn application, and food crop cultivation.
Class B Biosolids achieve significant pathogen reduction (fecal coliform geometric mean <2,000,000 CFU/g dry solids) via Processes to Significantly Reduce Pathogens (PSRP), but carry strict site restrictions: 14 to 38 months waiting periods for food crops touching soil, 30 days for grazing livestock, and 30 days to 1 year for public access.
Vector Attraction Reduction (VAR) mandates compliance with one of eight EPA Part 503 options—such as ≥38% volatile solids reduction or SOUR ≤1.5 mg O2/hr/g dry solids—to prevent disease vectors (flies, rodents, birds) from transmitting pathogens.
Land application rates must be calculated as the Agronomic Application Rate (AAR), strictly matching plant-available nitrogen (PAN) to crop uptake to prevent excess nitrate leaching into Arizona's protected drinking water aquifers under APP rules.
Last updated: September 2026
13.3 EPA Part 503 Biosolids Rules & Arizona Beneficial Use
Note
Dual Regulatory Framework in Arizona : Biosolids management in Arizona operates under two complementary regulatory frameworks: the federal U.S. EPA 40 CFR Part 503 Biosolids Rule (promulgated under Clean Water Act Section 405(d)) and state regulations administered by the Arizona Department of Environmental Quality (ADEQ) under Arizona Administrative Code (A.A.C.) Title 18, Chapter 9 (Aquifer Protection Permits - APP) and Chapter 13 (Solid Waste / Biosolids Management) . In Arizona, protecting deep alluvial groundwater aquifers from nitrate contamination is paramount, making agronomic nitrogen balancing a legal mandate.
Municipal wastewater solids contain valuable organic matter, macro-nutrients (nitrogen and phosphorus), and micro-nutrients (zinc, iron, copper) that make them valuable as agricultural soil conditioners and fertilizers. However, un-stabilized sewage sludge carries virulent pathogens and heavy metals that pose severe threats to public health, livestock, and groundwater. To balance environmental protection with beneficial resource recovery, federal and state regulations enforce stringent standards for pathogen reduction , vector attraction reduction , pollutant limits , and agronomic land application .
Biosolids vs. Sewage Sludge
Environmental law makes a sharp distinction between raw solids and treated residuals:
Sewage Sludge : Untreated or raw particulate matter generated during primary, secondary, or advanced wastewater treatment.
Biosolids : Sewage sludge that has undergone rigorous biological stabilization, chemical conditioning, and pathogen reduction treatment to meet the quality criteria specified in 40 CFR Part 503 for beneficial land application, surface disposal, or thermal oxidation.
Pathogen Reduction Classifications: Class A vs. Class B
EPA 40 CFR Part 503 establishes two distinct tiers of pathogen reduction based on microbiological densities, treatment processing, and public access restrictions.
1. Class A Biosolids (Unrestricted Public Distribution)
Class A biosolids are treated to reduce human pathogenic organisms (viruses, bacteria, enteric protozoa, and viable helminth ova) to below detectable analytical limits .
Bacterial Density Standards (must satisfy one prior to distribution):
Fecal Coliform Density : < 1,000 Most Probable Number (MPN) per gram of total dry solids ; OR
Salmonella sp. Bacterial Density : < 3 MPN per 4 grams of total dry solids .
Pathogen Destruction Standards (for specific processes):
Enteric Viruses : < 1 Plaque Forming Unit (PFU) per 4 grams of total dry solids.
Viable Helminth Ova ( Ascaris lumbricoides ): < 1 viable ovum per 4 grams of total dry solids.
Processes to Further Reduce Pathogens (PFRP) : Class A status is achieved through certified PFRP physical and thermal processes:
Thermal Drying : Biosolids are dried by direct or indirect heat to reduce cake moisture to <10% water (≥90% solids), with internal sludge temperatures exceeding 80°C (176°F) .
Thermophilic Composting : Within-vessel composting or static aerated compost piles must maintain temperatures of ≥55°C (131°F) for at least 3 consecutive days . Windrow composting must maintain ≥55°C for at least 15 consecutive days , with a minimum of 5 complete mechanical windrow turnings during the high-temperature period.
Heat Treatment : Liquid sludge is heated to ≥180°C (356°F) for 30 minutes under pressure.
Thermophilic Aerobic Digestion (TAD) : Aerated with air or oxygen at temperatures of 55°C to 60°C for a minimum retention time of 10 days .
Pasteurization : Sludge is maintained at temperatures of ≥70°C (158°F) for at least 30 continuous minutes .
Distribution & Utilization : Class A biosolids have no site restrictions . They may be sold in bags to the general public, applied to home vegetable gardens, used on golf courses and parks, spread on turf farms, and applied directly to human food crops.
2. Class B Biosolids (Restricted Agricultural Land Application)
Class B biosolids are treated to significantly reduce pathogens, but viable pathogens remain present in measurable quantities. The environment and natural sunlight, soil desiccation, and soil microbial antagonism complete pathogen die-off following application.
Bacterial Density Standard :
The geometric mean of seven discrete representative samples must be < 2,000,000 Colony Forming Units (CFU) or MPN per gram of total dry solids .
Processes to Significantly Reduce Pathogens (PSRP) :
Aerobic Digestion : Agitated under aeration with a Mean Cell Residence Time (MCRT) of 40 days at 20°C (68°F) , or 60 days at 15°C (59°F) .
Anaerobic Digestion : Maintained in an anaerobic digester with an MCRT of 15 days at 35°C to 55°C (95°F to 131°F) , or 60 days at 20°C (68°F) .
Lime Stabilization : Sufficient hydrated lime or quicklime is added to elevate sludge pH to ≥12 after 2 hours of contact .
Air Drying : Liquid sludge is dried on open sand beds or paved basins for a minimum of 3 months , with ambient daily temperatures above 0°C (32°F) for at least 2 of those months.
Mandatory Site Restrictions for Class B Biosolids
Because Class B biosolids contain residual viable pathogens, EPA Part 503.32(b) and ADEQ enforce strict harvesting, grazing, and public access waiting periods: +-----------------------------------------------------------------------------------+
- | EPA Part 503 Site Restrictions for Class B Biosolids |
- +-----------------------------------------------------------------------------------+
- | Food Crops Touching Soil | 14-Month Waiting Period: Melons, squash, |
- | (Harvested parts touch ground) | strawberries, cucumbers, and tomatoes. |
- | Food Crops Below Soil Surface | 20-Month Waiting Period: If biosolids remain on |
- | (Root crops, e.g. potatoes) | soil surface ≥4 months before incorporation. |
- | | 38-Month Waiting Period: If incorporated <4 mos. |
- | Feed, Fiber & Non-Touch Crops | 30-Day Waiting Period: Cotton, alfalfa, field |
- | | corn, silage, wheat, barley, and tree fruit. |
- | Animal Grazing | 30-Day Waiting Period: Domestic livestock |
- | | (beef/dairy cattle, sheep, horses) grazing. |
- | Turf / Sod Harvesting | 1-Year (365-Day) Waiting Period: Sod farms |
- | | harvesting turf for residential/commercial lawns.|
- | Public Access (Low Exposure) | 30-Day Waiting Period: Fenced private rangeland, |
- | | restricted-access agricultural acreage. |
- | Public Access (High Exposure) | 1-Year (365-Day) Waiting Period: Parks, athletic |
- | | fields, golf courses, cemeteries, road easements.|
- +-----------------------------------------------------------------------------------+
Loading diagram... EPA Part 503 Biosolids Pathways, Quality Tiers & Beneficial Use
Vector Attraction Reduction (VAR)
Vectors are insects (houseflies, blowflies, mosquitoes), rodents (rats, mice), and birds that can physically transmit pathogenic bacteria and viruses from sewage sludge to humans, livestock, and crops. Vector Attraction Reduction (VAR) reduces the attractiveness of biosolids to these organisms by stabilizing volatile organic matter or creating physical barriers.
EPA 40 CFR Part 503.33 specifies 8 biological/chemical options (Options 1–8) and 2 physical options (Options 9–10) to demonstrate compliance:
Option 1 (≥38% Volatile Solids Reduction) : Demonstrating at least a 38% reduction in volatile solids (VS) mass during anaerobic or aerobic digestion. Calculated using the Van Kleeck equation for digesters.
Option 2 (Anaerobic Batch Test) : For anaerobically digested sludge that cannot demonstrate 38% VSR due to low raw volatile content, incubating a portion of digested sludge anaerobically in a bench-scale batch reactor for 40 additional days at 30°C to 37°C (86°F to 99°F) must yield <17% additional volatile solids reduction .
Option 3 (Aerobic Batch Test) : For aerobically digested sludge with <2% solids, incubating a portion aerobically in a bench reactor for 30 additional days at 20°C (68°F) must yield <15% additional volatile solids reduction .
Option 4 (Specific Oxygen Uptake Rate - SOUR) : For aerobically digested liquid sludge, the Specific Oxygen Uptake Rate (SOUR) at 20°C must be ≤ 1.5 mg of oxygen per hour per gram of total dry solids ( 1.5 mg O 2 / hr / g total solids 1.5 \text{ mg } O_2/\text{hr}/\text{g total solids} 1.5 mg O 2 / hr / g total solids ). A low respiration rate proves that readily biodegradable organic substrate is depleted.
Option 5 (Aerobic High-Temperature Process) : Biosolids are composted or aerobically treated at temperatures >40°C (104°F) for at least 14 days , with an average temperature of >45°C (113°F) .
Option 6 (Alkaline Stabilization) : The pH of the sludge is raised to ≥12 at 25°C through addition of alkaline materials (quicklime, hydrated lime), maintained at ≥12 for at least 2 hours , and subsequently maintained at ≥11.5 for 22 additional hours without adding more alkali.
Option 7 (Moisture Reduction Without Primary Solids) : Biosolids with no un-digested primary solids are dried to a total solids content of ≥75% dry solids .
Option 8 (Moisture Reduction With Primary Solids) : Biosolids containing un-stabilized primary solids are dried to a total solids content of ≥90% dry solids .
Physical Barriers (Agricultural Options 9 & 10) :
Option 9 (Subsurface Injection) : Liquid biosolids are injected beneath the soil surface within 6 hours of discharge, with no significant liquid remaining on the surface.
Option 10 (Immediate Incorporation) : Surface-applied biosolids are plowed, disked, or incorporated into the soil within 6 hours of application.
Pollutant Limits: The Nine Regulated Heavy Metals
EPA 40 CFR Part 503.13 establishes ceiling and cumulative limits for nine inorganic trace heavy metals that bioaccumulate in soils or plant tissues:
Ceiling Concentrations (Table 1) : The absolute maximum allowable concentration (in mg/kg dry weight) for any metal. If a biosolids sample exceeds the Table 1 ceiling concentration for even one metal , the biosolids CANNOT be land applied under any circumstances and must be landfilled or incinerated.
Pollutant Concentrations (Table 3 - "Clean Sludge") : Lower monthly average concentrations. Biosolids meeting Table 3 limits represent high-purity solids eligible for Exceptional Quality status.
Cumulative Pollutant Loading Rates (CPLRs - Table 2) : The maximum cumulative lifetime mass of each metal (in kg/hectare or lbs/acre) that can be applied to an agricultural site. Once a parcel of land reaches the CPLR for any single metal, no further Part 503 bulk biosolids can be applied to that site.
Regulated Trace Metal Symbol Table 1 Ceiling Concentration (mg/kg dry wt) Table 3 Pollutant Concentration (mg/kg dry wt) Table 2 Cumulative Loading Rate (CPLR - lbs/acre) Environmental & Health Hazard
- Arsenic A s As A s 75 41 36.6 Carcinogen; phytotoxicity in crops
- Cadmium C d Cd C d 85 39 34.8 Renal toxicity; plant bioaccumulation
- Copper C u Cu C u 4,300 1,500 1,339 Phytotoxicity; highly toxic to sheep
- Lead P b Pb P b 840 300 268 Neurotoxin; child development risk
- Mercury H g Hg H g 57 17 15.2 Methylmercury neurological damage
- Molybdenum M o Mo M o 75 -- (Under review) -- Causes molybdenosis in ruminant animals
- Nickel N i Ni N i 420 420 375 Phytotoxicity; soil microbial inhibition
- Selenium S e Se S e 100 100 89.2 Toxic to livestock at high doses (selenosis)
- Zinc Z n Zn Z n 7,500 2,800 2,499 Strong plant phytotoxicity at acidic pH
- Exceptional Quality (EQ) Biosolids
Exceptional Quality (EQ) is the premier regulatory classification in biosolids management. To achieve EQ status, the material must satisfy the "Triple Crown" of federal standards: +-----------------------------------------------------------------------------------+
- | The "Triple Crown" of Exceptional Quality (EQ) |
- +-----------------------------------------------------------------------------------+
- | 1. High-Purity Metals | Must strictly meet EPA Table 3 Pollutant |
- | | Concentrations (Monthly Averages). |
- | 2. Complete Pathogen Kill | Must achieve Class A standards (Fecal coliform |
- | | < 1,000 MPN/g or Salmonella < 3 MPN/4g via PFRP).|
- | 3. Vector Attraction Reduction | Must satisfy one of the biological/chemical |
- | | VAR criteria (Options 1 through 8). |
- +-----------------------------------------------------------------------------------+
- Regulatory Exemptions for EQ Biosolids
Once biosolids achieve certified EQ status, they are fully deregulated from Part 503 site restrictions . EQ biosolids:
Can be bagged, marketed, and distributed to retail garden centers as commercial organic fertilizer.
Can be applied freely to urban parks, school athletic fields, residential lawns, and golf courses without public access restrictions.
Are exempt from tracking Cumulative Pollutant Loading Rates (CPLRs) on receiving soils.
Require no land application permitting, waiting periods, or tracking of site boundaries.
Agronomic Application Rate (AAR) & Arizona Aquifer Protection
Under ADEQ Aquifer Protection Permit (APP) rules and federal Part 503.14, bulk biosolids applied to agricultural land must be applied at or below the Agronomic Application Rate (AAR) .
Protecting Arizona's Drinking Water Aquifers
In Arizona, groundwater provides the primary potable drinking water source for millions of residents. Under A.R.S. Title 49 and ADEQ APP rules, all aquifers are classified as protected drinking water sources. The National Primary Drinking Water Regulation and Arizona Aquifer Water Quality Standard for Nitrate-Nitrogen ( N O 3 − NO_3^- N O 3 − -N) is strictly 10 mg/L . Over-applying biosolids releases excess mobile nitrate that leaches below crop root zones and contaminates underlying aquifers.
Calculating Plant Available Nitrogen (PAN)
Biosolids nitrogen exists in three forms: organic nitrogen, ammonium ( N H 4 + NH_4^+ N H 4 + ), and nitrate ( N O 3 − NO_3^- N O 3 − ). Plants can only absorb inorganic nitrogen ( N H 4 + NH_4^+ N H 4 + and N O 3 − NO_3^- N O 3 − ). Organic nitrogen must be biochemically mineralized into inorganic forms by soil microorganisms over time. PAN (lbs/dry ton) = ( N H 4 + -N × K v ) + ( N O 3 − -N ) + ( Org-N × F m ) \text{PAN (lbs/dry ton)} = (NH_4^+\text{-N} \times K_v) + (NO_3^-\text{-N}) + (\text{Org-N} \times F_m) PAN (lbs/dry ton) = ( N H 4 + -N × K v ) + ( N O 3 − -N ) + ( Org-N × F m )
Where:
K v K_v K v (Volatilization Factor) : Accounts for ammonia gas loss to the atmosphere. If biosolids are surface-applied without incorporation in hot desert air, K v ≈ 0.50 K_v \approx 0.50 K v ≈ 0.50 (50% ammonia volatilizes). If injected or incorporated within 24 hours, K v = 1.0 K_v = 1.0 K v = 1.0 (zero volatilization).
F m F_m F m (Mineralization Factor) : The fraction of organic nitrogen mineralized into plant-available forms during the first growing season. For anaerobically or aerobically digested biosolids, Year 1 mineralization is typically 20% to 30% ( F m = 0.20 to 0.30 F_m = 0.20 \text{ to } 0.30 F m = 0.20 to 0.30 ) .
The Agronomic Rate Equation
The Agronomic Application Rate calculates the dry tons of biosolids permitted per acre: AAR (Dry Tons/Acre) = Crop Nitrogen Requirement (lbs N/acre) − Nitrogen Credits (lbs N/acre) Plant Available Nitrogen (PAN in lbs N/dry ton) \text{AAR (Dry Tons/Acre)} = \frac{\text{Crop Nitrogen Requirement (lbs N/acre)} - \text{Nitrogen Credits (lbs N/acre)}}{\text{Plant Available Nitrogen (PAN in lbs N/dry ton)}} AAR (Dry Tons/Acre) = Plant Available Nitrogen (PAN in lbs N/dry ton) Crop Nitrogen Requirement (lbs N/acre) − Nitrogen Credits (lbs N/acre)
Applied Arizona Example : A Pinal County farmer is growing upland cotton with an agricultural nitrogen demand of 150 lbs N/acre . Soil tests indicate zero residual nitrogen credits. The utility's anaerobically digested biosolids contain 25 lbs of PAN per dry ton : AAR = 150 lbs N/acre 25 lbs PAN/dry ton = 6.0 Dry Tons/Acre \text{AAR} = \frac{150 \text{ lbs N/acre}}{25 \text{ lbs PAN/dry ton}} = 6.0 \text{ Dry Tons/Acre} AAR = 25 lbs PAN/dry ton 150 lbs N/acre = 6.0 Dry Tons/Acre
Applying more than 6.0 dry tons per acre constitutes a direct violation of ADEQ Aquifer Protection Permit conditions, threatening groundwater quality with unabsorbed nitrate leaching.