Study guide

22.3 Budgets, Procurement, Cost Analysis & Capital Improvement Planning

Arizona Water/Wastewater Operator Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Arizona Regulatory Framework & ADEQ Certification

1.1 ADEQ Operator Certification Rules & Grade Structure 1.2 Facility Classification & Operator in Direct Responsible Charge (ODRC) 1.3 Arizona Aquifer Protection Permit (APP) Program & BADCT 1.4 AZPDES Surface Water Discharges & Arizona Reclaimed Water Standards 1.5 The WPI Need-to-Know Criteria: What Is Actually on Your Exam

2 Chapter 2: Federal Drinking Water & Clean Water Act Compliance

2.1 Safe Drinking Water Act (SDWA) Primary & Secondary MCLs 2.2 Surface Water Treatment Rules & Revised Total Coliform Rule (RTCR) 2.3 Stage 1 & Stage 2 Disinfectants/Disinfection Byproducts Rules (D/DBPR)

3 Chapter 3: Source Water Assessment, Wells & Watershed Protection

3.1 Groundwater Sources, Well Components & Water Level Measurement 3.2 Surface Water Sources, Intakes & Reservoir Management 3.3 Watershed Management, Contamination Sources & Public Education 3.4 Pretreatment: Aeration, Presedimentation & Algae Control

4 Chapter 4: Source Water Quality, Coagulation & Flocculation

4.1 Arizona Source Water Quality & Arid Climate Challenges 4.2 Coagulation Chemistry, Coagulants & Jar Testing 4.3 Flocculation Basin Design & Process Control 4.4 Sedimentation Basins, Clarifiers & Solids Contact Units

5 Chapter 5: Filtration Systems & Advanced Separation

5.1 Granular Media Filtration Principles & Media Types 5.2 Filter Backwash Operations, Ripening & Filter-to-Waste 5.3 Membrane Filtration & Reverse Osmosis Desalination 5.4 Ion Exchange Softening, Arsenic Removal & GAC Adsorption

6 Chapter 6: Drinking Water Disinfection & Chemical Oxidation

6.1 Chlorine Chemistry & Break-Point Chlorination 6.2 The CT Disinfection Concept & Basin Hydraulics 6.3 Alternative Disinfectants: Chloramines, Ozone, UV & Chlorine Dioxide

7 Chapter 7: Specialized Drinking Water Treatment & Chemical Conditioning

7.1 Iron & Manganese Removal 7.2 Fluoridation: Chemicals, Dosage & Safety 7.3 Corrosion Control, Saturation Indices & the Lead and Copper Rule 7.4 Water Treatment Plant Residuals Handling & Disposal

8 Chapter 8: Water Treatment Plant Equipment Operation & Maintenance

8.1 Raw Water Intake, Screening & Pumping Equipment 8.2 Chemical Feed Equipment, Storage & Metering 8.3 Instrumentation, Online Analyzers, SCADA & Calibration 8.4 Valves, Motors, Auxiliary Systems & Maintenance Programs

9 Chapter 9: Wastewater Preliminary, Primary & Biological Treatment Principles

9.1 Wastewater Characteristics & Preliminary Treatment 9.2 Primary Clarification Design & Settling Mechanics 9.3 Biological Treatment Kinetics & Microbiology

10 Chapter 10: Activated Sludge Processes & Nutrient Removal

10.1 Activated Sludge Configurations & Operational Mass Balance 10.2 Process Control Parameters, Settleability & Troubleshooting 10.3 Biological Nutrient Removal: Nitrification, Denitrification & Phosphorus Removal

11 Chapter 11: Fixed-Film, Lagoon & Advanced Secondary Processes

11.1 Trickling Filters & Attached Growth Fundamentals 11.2 Rotating Biological Contactors & Hybrid Processes 11.3 Stabilization Ponds & Lagoon Systems 11.4 Membrane Bioreactors

12 Chapter 12: Tertiary Treatment, Wastewater Disinfection & Effluent Management

12.1 Tertiary Filtration & Advanced Effluent Polishing 12.2 Wastewater Chlorination & Dechlorination 12.3 Ultraviolet & Ozone Disinfection of Wastewater 12.4 Effluent Disposal, Reclaimed Water Reuse & Permit Compliance

13 Chapter 13: Residuals Management & Sludge Processing

13.1 Sludge Thickening & Digestion Processes 13.2 Sludge Dewatering Technologies & Drying Beds 13.3 EPA Part 503 Biosolids Rules & Arizona Beneficial Use

14 Chapter 14: Wastewater Plant Equipment Operation & Maintenance

14.1 Preliminary & Primary Treatment Equipment 14.2 Aeration Systems, Blowers, Diffusers & Dissolved Oxygen Control 14.3 Wastewater Pumps, Mixers & Chemical Dosing Equipment 14.4 Electrical Systems, Online Analyzers & Auxiliary Power

15 Chapter 15: Water Distribution Infrastructure & Hydraulic Management

15.1 Water Main Materials, Fittings & Appurtenances 15.2 Water Storage, Pressure Management & Water Age 15.3 Cross-Connection Control & Backflow Prevention 15.4 Main Maintenance, Unidirectional Flushing & Leak Detection 15.5 Distribution Hydraulics, Head Loss & C-Factor 15.6 System Mapping, GIS, Plans & Distribution SCADA

16 Chapter 16: Water Main Installation, Repair & Disinfection

16.1 Main & Service Line Installation, Tapping & Thrust Restraint 16.2 New Construction Inspection, Pressure Testing & Utility Locating 16.3 Disinfection of Mains, Storage Facilities & Repaired Components 16.4 Booster Stations, Meters & Storage Facility Inspection

17 Chapter 17: Distribution Water Quality Management & Field Testing

17.1 Distribution Chemical Feed, Dosage Adjustment & Booster Chlorination 17.2 Distribution Sampling Programs & Field Analyses 17.3 Chemical Transport, Storage & Handling in Distribution Operations 17.4 Interpreting Water Quality Data, Complaints & Nitrification Control

18 Chapter 18: Wastewater Collection Systems & Lift Stations

18.1 Gravity Sewer Design, Piping Materials & Manholes 18.2 Inflow & Infiltration (I&I) Assessment & Pipeline Rehabilitation 18.3 Wastewater Lift Stations, Pump Types & Force Mains 18.4 Hydrogen Sulfide Corrosion, Odor Control & Line Cleaning 18.5 Excavation, Heavy Equipment & Surface Restoration

19 Chapter 19: Collection System Cleaning, Inspection & Rehabilitation

19.1 Hydraulic Cleaning, Rodding & Blockage Removal 19.2 CCTV Inspection, Condition Assessment & FOG Control 19.3 Trenchless Rehabilitation: CIPP, Pipe Bursting & Lining 19.4 SSO Response, Flow Monitoring & Capacity Assurance

20 Chapter 20: Laboratory Testing, Quality Control & Monitoring

20.1 Drinking Water Analytical Methods & Compliance Testing 20.2 Wastewater Laboratory Analytics & Process Control Tests 20.3 Sampling Protocols, Chain of Custody & Laboratory QA/QC 20.4 Emerging Contaminants, PFAS & Advanced Analytical Methods

21 Chapter 21: Utility Safety Programs & Emergency Preparedness

21.1 Lockout/Tagout, Electrical Safety & Arc Flash 21.2 Personal Protective Equipment, Fall Protection & Bloodborne Pathogens 21.3 Traffic Control & Work Zone Safety 21.4 Emergency Response Planning & Disaster Recovery 21.5 Heat Illness Prevention, Respiratory Protection & Hearing Conservation

22 Chapter 22: Security, Administration & Utility Management

22.1 Facility Security, Vulnerability Assessment & Cybersecurity 22.2 Recordkeeping, Standard Operating Procedures & Regulatory Reporting 22.3 Budgets, Procurement, Cost Analysis & Capital Improvement Planning 22.4 Asset Management, Energy Optimization & Water Loss Control 22.5 Supervision, Training, Customer Service & Public Communication

23 Chapter 23: Applied Operator Mathematics, Pumping Hydraulics & Utility Safety

23.1 Chemical Feed Calculations & Dosage Problem Solving 23.2 Geometric Volumes, Hydraulic Loading & Detention Time Math 23.3 Pumping Mechanics, System Head & Horsepower Calculations 23.4 Plant Safety: Confined Spaces, Chemical Hazards & OSHA Standards 23.5 Unit Conversions & Using the Supplied Formula/Conversion Table 23.6 Percent Removal, Process Efficiency & Solution Blending

22.3 Budgets, Procurement, Cost Analysis & Capital Improvement Planning

Key Takeaways Explain This Topic AI

An operating budget funds recurring annual costs while a capital budget funds long-lived assets, and the two are funded and approved through different processes.

Rates must generate enough revenue to cover operations, debt service, and renewal, and a utility that funds only operations is deferring cost rather than avoiding it.

Life-cycle cost analysis compares the total cost of ownership over an asset's life, which frequently reverses a decision based on purchase price alone.

Competitive procurement uses formal bid thresholds, and splitting a purchase to stay below a threshold is a procurement violation.

Simple payback divides the incremental cost by annual savings and is the standard first screen for an efficiency investment.

Last updated: September 2026

22.3 Budgets, Procurement, Cost Analysis & Capital Improvement Planning

Operators contribute to budgets more than they usually realize: the equipment request, the chemical usage projection, the estimate of what a repair will cost. Understanding the framework makes those contributions credible.

Operating Versus Capital

  • Operating budget Capital budget
  • Funds Recurring annual costs Long-lived assets

Examples Salaries, chemicals, power, fuel, parts, contract services, laboratory fees New pump station, main replacement, plant expansion, major equipment

  • Horizon One fiscal year Multi-year
  • Funding Rate revenue Bonds, loans, grants, reserves, impact fees
  • Accounting Expensed in the year incurred Capitalized and depreciated over the asset's life

The threshold that separates them is usually a dollar amount plus a minimum useful life — commonly something like $5,000 and three years, set by the utility's policy.

Typical operating cost distribution at a water or wastewater utility:

  • Category Approximate share
  • Personnel 40 to 50%
  • Power 10 to 30% (aeration and pumping dominate)
  • Chemicals 5 to 15%
  • Maintenance and parts 10 to 15%
  • Contract services and laboratory 5 to 10%
  • Administration and insurance 5 to 10%
  • Debt service Varies widely
  • The Revenue Requirement

Rates must generate enough to cover: Revenue Requirement = O&M + Debt Service + Reserves + Capital funded from rates \text{Revenue Requirement} = \text{O\&M} + \text{Debt Service} + \text{Reserves} + \text{Capital funded from rates} Revenue Requirement = O&M + Debt Service + Reserves + Capital funded from rates

Important

A utility that funds only operations and maintenance is not saving money; it is deferring cost onto a future rate payer. Infrastructure fails eventually, and deferred renewal accumulates into a replacement burden far larger than the annual funding that would have prevented it. The industry term for the resulting condition is a replacement cliff . Rate structures that fund renewal — through depreciation funding, a capital reserve, or rate-funded capital — are what keep a system solvent over decades.

Rate structures include uniform volumetric rates, increasing block (tiered) rates that promote conservation and are widely used in Arizona, decreasing block rates (largely disfavored for a scarce resource), seasonal rates, and a fixed base charge plus volumetric charge , which is the most common structure because the base charge recovers the fixed costs that exist regardless of consumption.

The conservation paradox is real : successful conservation reduces sales volume while the utility's costs remain overwhelmingly fixed, so revenue falls faster than cost. A larger fixed component in the rate structure is the standard response.

Cost Estimating and Analysis

Simple Payback Payback (years) = Incremental Cost Annual Savings \text{Payback (years)} = \frac{\text{Incremental Cost}}{\text{Annual Savings}} Payback (years) = Annual Savings Incremental Cost ​

Worked example. A variable frequency drive costs $42,000 installed and reduces power consumption by $11,500 per year. 42 , 000 11 , 500 = 3.7 years \frac{42,000}{11,500} = 3.7\text{ years} 11 , 500 42 , 000 ​ = 3.7 years

Simple payback is the standard first screen because it is quick and intuitive. Its limitation is that it ignores everything after the payback period and ignores the time value of money.

Life-Cycle Cost Life-Cycle Cost = Purchase + Installation + Operating + Maintenance + Disposal − Salvage \text{Life-Cycle Cost} = \text{Purchase} + \text{Installation} + \text{Operating} + \text{Maintenance} + \text{Disposal} - \text{Salvage} Life-Cycle Cost = Purchase + Installation + Operating + Maintenance + Disposal − Salvage

Worked example. Two pumps, each with a 15-year life:

  • Pump A Pump B
  • Purchase and installation $28,000 $41,000
  • Annual energy $9,400 $6,800
  • Annual maintenance $2,100 $1,500
  • 15-year total $200,500 $165,500

Pump A is $13,000 cheaper to buy and $35,000 more expensive to own. This reversal is the entire point of life-cycle analysis, and it is why energy and maintenance costs belong in a procurement evaluation rather than only the bid price.

Estimating Chemical Cost Annual Cost = Dose (mg/L) × Flow (MGD) × 8.34 × 365 × Unit Cost per lb \text{Annual Cost} = \text{Dose (mg/L)} \times \text{Flow (MGD)} \times 8.34 \times 365 \times \text{Unit Cost per lb} Annual Cost = Dose (mg/L) × Flow (MGD) × 8.34 × 365 × Unit Cost per lb

Worked example. Alum at 22 mg/L, 4.6 MGD, $0.31 per pound: 22 × 4.6 × 8.34 × 365 × 0.31 = $ 95 , 500 per year 22 \times 4.6 \times 8.34 \times 365 \times 0.31 = \$95,500\text{ per year} 22 × 4.6 × 8.34 × 365 × 0.31 = $95 , 500 per year

That figure is exactly why a jar test that identifies a 3 mg/L dose reduction is worth roughly $13,000 a year — operator process optimization has direct budget consequences.

Procurement

  • Method Typical use
  • Small purchase / petty cash Below a low threshold; minimal documentation
  • Informal quotes Mid-range; commonly three written quotes

Formal sealed bid (invitation for bid) Above the formal threshold; award to the lowest responsive and responsible bidder

  • Request for proposals Where qualifications and approach matter, not only price
  • Qualifications-based selection Required for engineering and architectural services in many jurisdictions
  • Sole source Only where genuinely one source exists; requires written justification
  • Cooperative purchasing Piggybacking on another agency's competitively bid contract
  • Emergency procurement Expedited under a declared emergency; documented after the fact

Warning

Splitting a purchase to stay under a bid threshold is a procurement violation , even when the intent is only to avoid delay. Ordering the same pump in three separate transactions to remain below a formal bid threshold is treated as circumvention and can result in disciplinary action, audit findings, and personal liability. If the aggregate purchase exceeds the threshold, it goes out to bid.

"Lowest responsive and responsible bidder" is a term of art worth knowing: responsive means the bid conformed to the specification and bidding requirements, and responsible means the bidder has the capability, experience, and financial capacity to perform. The lowest price alone does not win if either test fails.

Conflict of interest rules bar an operator from participating in a purchase decision benefiting a business in which they or a family member hold an interest, and gift and gratuity restrictions apply. Vendor relationships in a small utility community require deliberate care.

Capital Improvement Planning

A capital improvement plan (CIP) is a multi-year schedule of capital projects with cost estimates and funding sources, typically covering five to ten years and updated annually.

Prioritization criteria : regulatory compliance and public health first, then risk of failure and its consequence, growth and capacity needs, energy and operational savings, and level-of-service improvements.

Funding sources available to Arizona utilities:

  • Source Notes
  • Rate revenue (pay-as-you-go) No interest cost; limited by annual capacity
  • Revenue bonds Repaid from utility revenue; requires coverage ratios
  • General obligation bonds Backed by taxing authority; usually requires voter approval

WIFA loans The Water Infrastructure Finance Authority of Arizona administers the state revolving funds; below-market rates and, for qualifying systems, forgivable principal

  • Grants USDA Rural Development, federal and state programs; heavily competitive
  • Development impact fees Growth pays for growth-related capacity

WIFA is the single most important capital funding channel for Arizona water and wastewater utilities , administering both the Drinking Water and Clean Water State Revolving Funds, and its application process rewards utilities that have a current CIP, an asset management program, and a demonstrated rate structure adequate to repay the loan.