Study guide

3.2 Surface Water Sources, Intakes & Reservoir Management

Arizona Water/Wastewater Operator Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Arizona Regulatory Framework & ADEQ Certification

1.1 ADEQ Operator Certification Rules & Grade Structure 1.2 Facility Classification & Operator in Direct Responsible Charge (ODRC) 1.3 Arizona Aquifer Protection Permit (APP) Program & BADCT 1.4 AZPDES Surface Water Discharges & Arizona Reclaimed Water Standards 1.5 The WPI Need-to-Know Criteria: What Is Actually on Your Exam

2 Chapter 2: Federal Drinking Water & Clean Water Act Compliance

2.1 Safe Drinking Water Act (SDWA) Primary & Secondary MCLs 2.2 Surface Water Treatment Rules & Revised Total Coliform Rule (RTCR) 2.3 Stage 1 & Stage 2 Disinfectants/Disinfection Byproducts Rules (D/DBPR)

3 Chapter 3: Source Water Assessment, Wells & Watershed Protection

3.1 Groundwater Sources, Well Components & Water Level Measurement 3.2 Surface Water Sources, Intakes & Reservoir Management 3.3 Watershed Management, Contamination Sources & Public Education 3.4 Pretreatment: Aeration, Presedimentation & Algae Control

4 Chapter 4: Source Water Quality, Coagulation & Flocculation

4.1 Arizona Source Water Quality & Arid Climate Challenges 4.2 Coagulation Chemistry, Coagulants & Jar Testing 4.3 Flocculation Basin Design & Process Control 4.4 Sedimentation Basins, Clarifiers & Solids Contact Units

5 Chapter 5: Filtration Systems & Advanced Separation

5.1 Granular Media Filtration Principles & Media Types 5.2 Filter Backwash Operations, Ripening & Filter-to-Waste 5.3 Membrane Filtration & Reverse Osmosis Desalination 5.4 Ion Exchange Softening, Arsenic Removal & GAC Adsorption

6 Chapter 6: Drinking Water Disinfection & Chemical Oxidation

6.1 Chlorine Chemistry & Break-Point Chlorination 6.2 The CT Disinfection Concept & Basin Hydraulics 6.3 Alternative Disinfectants: Chloramines, Ozone, UV & Chlorine Dioxide

7 Chapter 7: Specialized Drinking Water Treatment & Chemical Conditioning

7.1 Iron & Manganese Removal 7.2 Fluoridation: Chemicals, Dosage & Safety 7.3 Corrosion Control, Saturation Indices & the Lead and Copper Rule 7.4 Water Treatment Plant Residuals Handling & Disposal

8 Chapter 8: Water Treatment Plant Equipment Operation & Maintenance

8.1 Raw Water Intake, Screening & Pumping Equipment 8.2 Chemical Feed Equipment, Storage & Metering 8.3 Instrumentation, Online Analyzers, SCADA & Calibration 8.4 Valves, Motors, Auxiliary Systems & Maintenance Programs

9 Chapter 9: Wastewater Preliminary, Primary & Biological Treatment Principles

9.1 Wastewater Characteristics & Preliminary Treatment 9.2 Primary Clarification Design & Settling Mechanics 9.3 Biological Treatment Kinetics & Microbiology

10 Chapter 10: Activated Sludge Processes & Nutrient Removal

10.1 Activated Sludge Configurations & Operational Mass Balance 10.2 Process Control Parameters, Settleability & Troubleshooting 10.3 Biological Nutrient Removal: Nitrification, Denitrification & Phosphorus Removal

11 Chapter 11: Fixed-Film, Lagoon & Advanced Secondary Processes

11.1 Trickling Filters & Attached Growth Fundamentals 11.2 Rotating Biological Contactors & Hybrid Processes 11.3 Stabilization Ponds & Lagoon Systems 11.4 Membrane Bioreactors

12 Chapter 12: Tertiary Treatment, Wastewater Disinfection & Effluent Management

12.1 Tertiary Filtration & Advanced Effluent Polishing 12.2 Wastewater Chlorination & Dechlorination 12.3 Ultraviolet & Ozone Disinfection of Wastewater 12.4 Effluent Disposal, Reclaimed Water Reuse & Permit Compliance

13 Chapter 13: Residuals Management & Sludge Processing

13.1 Sludge Thickening & Digestion Processes 13.2 Sludge Dewatering Technologies & Drying Beds 13.3 EPA Part 503 Biosolids Rules & Arizona Beneficial Use

14 Chapter 14: Wastewater Plant Equipment Operation & Maintenance

14.1 Preliminary & Primary Treatment Equipment 14.2 Aeration Systems, Blowers, Diffusers & Dissolved Oxygen Control 14.3 Wastewater Pumps, Mixers & Chemical Dosing Equipment 14.4 Electrical Systems, Online Analyzers & Auxiliary Power

15 Chapter 15: Water Distribution Infrastructure & Hydraulic Management

15.1 Water Main Materials, Fittings & Appurtenances 15.2 Water Storage, Pressure Management & Water Age 15.3 Cross-Connection Control & Backflow Prevention 15.4 Main Maintenance, Unidirectional Flushing & Leak Detection 15.5 Distribution Hydraulics, Head Loss & C-Factor 15.6 System Mapping, GIS, Plans & Distribution SCADA

16 Chapter 16: Water Main Installation, Repair & Disinfection

16.1 Main & Service Line Installation, Tapping & Thrust Restraint 16.2 New Construction Inspection, Pressure Testing & Utility Locating 16.3 Disinfection of Mains, Storage Facilities & Repaired Components 16.4 Booster Stations, Meters & Storage Facility Inspection

17 Chapter 17: Distribution Water Quality Management & Field Testing

17.1 Distribution Chemical Feed, Dosage Adjustment & Booster Chlorination 17.2 Distribution Sampling Programs & Field Analyses 17.3 Chemical Transport, Storage & Handling in Distribution Operations 17.4 Interpreting Water Quality Data, Complaints & Nitrification Control

18 Chapter 18: Wastewater Collection Systems & Lift Stations

18.1 Gravity Sewer Design, Piping Materials & Manholes 18.2 Inflow & Infiltration (I&I) Assessment & Pipeline Rehabilitation 18.3 Wastewater Lift Stations, Pump Types & Force Mains 18.4 Hydrogen Sulfide Corrosion, Odor Control & Line Cleaning 18.5 Excavation, Heavy Equipment & Surface Restoration

19 Chapter 19: Collection System Cleaning, Inspection & Rehabilitation

19.1 Hydraulic Cleaning, Rodding & Blockage Removal 19.2 CCTV Inspection, Condition Assessment & FOG Control 19.3 Trenchless Rehabilitation: CIPP, Pipe Bursting & Lining 19.4 SSO Response, Flow Monitoring & Capacity Assurance

20 Chapter 20: Laboratory Testing, Quality Control & Monitoring

20.1 Drinking Water Analytical Methods & Compliance Testing 20.2 Wastewater Laboratory Analytics & Process Control Tests 20.3 Sampling Protocols, Chain of Custody & Laboratory QA/QC 20.4 Emerging Contaminants, PFAS & Advanced Analytical Methods

21 Chapter 21: Utility Safety Programs & Emergency Preparedness

21.1 Lockout/Tagout, Electrical Safety & Arc Flash 21.2 Personal Protective Equipment, Fall Protection & Bloodborne Pathogens 21.3 Traffic Control & Work Zone Safety 21.4 Emergency Response Planning & Disaster Recovery 21.5 Heat Illness Prevention, Respiratory Protection & Hearing Conservation

22 Chapter 22: Security, Administration & Utility Management

22.1 Facility Security, Vulnerability Assessment & Cybersecurity 22.2 Recordkeeping, Standard Operating Procedures & Regulatory Reporting 22.3 Budgets, Procurement, Cost Analysis & Capital Improvement Planning 22.4 Asset Management, Energy Optimization & Water Loss Control 22.5 Supervision, Training, Customer Service & Public Communication

23 Chapter 23: Applied Operator Mathematics, Pumping Hydraulics & Utility Safety

23.1 Chemical Feed Calculations & Dosage Problem Solving 23.2 Geometric Volumes, Hydraulic Loading & Detention Time Math 23.3 Pumping Mechanics, System Head & Horsepower Calculations 23.4 Plant Safety: Confined Spaces, Chemical Hazards & OSHA Standards 23.5 Unit Conversions & Using the Supplied Formula/Conversion Table 23.6 Percent Removal, Process Efficiency & Solution Blending

3.2 Surface Water Sources, Intakes & Reservoir Management

Key Takeaways Explain This Topic AI

Thermal stratification separates a reservoir into epilimnion, metalimnion, and hypolimnion, and the anoxic hypolimnion is where dissolved iron, manganese, hydrogen sulfide, and taste and odor compounds accumulate.

Spring and fall turnover mixes hypolimnetic water through the whole reservoir and typically produces the worst raw water quality of the year at the intake.

Multi-level intakes let an operator select the depth with the best raw water quality instead of accepting whatever the reservoir delivers at a single fixed elevation.

Geosmin and 2-methylisoborneol from cyanobacteria and actinomycetes cause earthy and musty tastes at nanogram-per-liter levels and are not removed by conventional treatment or free chlorine.

Quagga mussels are established in Colorado River water delivered by the Central Arizona Project and foul intakes, screens, and raw water piping.

Last updated: September 2026

3.2 Surface Water Sources, Intakes & Reservoir Management

The Need-to-Know Criteria require Water Treatment operators to "inspect surface water sources for issues that may affect water quality (e.g., non-native plant species, mussels, algae, erosion)," "perform raw water reservoir inspection, maintenance, and cleaning," and "manage stored water release based on forecasted demand." In Arizona these tasks center on a handful of very large, very hot, heavily managed reservoirs.

Arizona's Surface Water Sources

Colorado River via the Central Arizona Project (CAP) : a 336-mile canal delivering water to Phoenix and Tucson. Long open-channel residence time means warming, evaporation-driven mineral concentration, and algal growth in the canal itself .

Salt and Verde Rivers : the Salt River Project reservoir chain (Roosevelt, Apache, Canyon, Saguaro on the Salt; Horseshoe and Bartlett on the Verde) serving the Phoenix metropolitan area.

Local reservoirs and direct diversions serving smaller communities.

Common characteristics: high evaporation, elevated total dissolved solids, warm water for much of the year, extreme monsoon turbidity spikes, and long detention that favors algal growth.

Thermal Stratification: Why a Lake Is Three Lakes

Water reaches maximum density at about 39°F (4°C). As a reservoir warms through spring and summer, warm low-density water floats on cold dense water and the lake separates into layers that no longer mix.

  • Layer Position Temperature Dissolved oxygen Water quality
  • Epilimnion Top Warm, uniform Near saturation Algae, high pH from photosynthesis, warm
  • Metalimnion (thermocline) Middle Rapid temperature drop with depth Transitional Transition zone

Hypolimnion Bottom Cold, uniform Depleted to anoxic Dissolved iron and manganese, hydrogen sulfide, ammonia, taste and odor

The hypolimnion is the operator's problem. Cut off from the atmosphere and from photosynthesis, bacteria decomposing settled organic matter consume the oxygen. Once the water goes anoxic, reducing conditions convert insoluble ferric iron and manganic manganese into soluble ferrous iron (Fe²⁺) and manganous manganese (Mn²⁺) , which dissolve out of the sediments. Sulfate reduction generates hydrogen sulfide with its rotten-egg odor, and ammonia accumulates.

Turnover

In fall, surface water cools until it matches the density of the deeper water, and wind then mixes the entire reservoir top to bottom. Fall turnover distributes accumulated hypolimnetic iron, manganese, sulfide, ammonia, and organic matter throughout the water column, including past your intake. In many climates a second, weaker spring turnover follows ice-out.

Warning

Turnover is the single most predictable raw water quality crisis of the year. Symptoms at the plant: sudden manganese in finished water producing black water complaints, a jump in chlorine demand from ammonia and sulfide, taste and odor complaints, and coagulation upset from a changed raw water character. Anticipate it — do not react to it.

Intakes and Depth Selection

A multi-level (multi-port) intake tower has gated openings at several elevations, letting the operator select withdrawal depth. This is the most powerful raw water quality tool available, and the NTK expects operators to understand it.

Selection logic through the year:

Summer stratified conditions : avoid the epilimnion during a heavy algal bloom (algae, high pH, taste and odor) and avoid the anoxic hypolimnion (iron, manganese, sulfide). Draw from the metalimnion.

During turnover : the reservoir is mixed, so depth selection buys little. This is when treatment adjustments carry the load.

High turbidity after monsoon runoff : draw deeper, below the turbid inflow plume, or above a density current running along the bottom.

Other intake features:

Trash racks exclude logs and large debris; traveling screens or bar screens remove smaller material.

Low-lift (raw water) pumps move water to the plant.

Zebra and quagga mussel control — chlorination, copper-based coatings, or mechanical removal.

Intake depth alarms protect against pumping air as reservoir levels fall.

Reservoir Inspection and Maintenance Tasks

Routine work includes checking for shoreline erosion and sedimentation reducing storage, non-native and invasive plant species , evidence of animal or human contamination in the watershed , algal bloom development , and the physical integrity of intake structures, gates, screens, and hoists. Sediment surveys quantify lost capacity over decades.

Managing Stored Water Release

The NTK asks operators to "manage stored water release based on forecasted demand." Practically, that means coordinating reservoir withdrawals against projected system demand, downstream delivery obligations, water rights and allocations, seasonal peaking, and the raw water quality expected at the chosen depth. In Arizona this is bound up with CAP allocations and Colorado River shortage tiers, which can change how much surface water a utility may take in a given year.

Loading diagram... Reservoir stratification, turnover, and intake depth selection

Algae, Taste and Odor, and Cyanotoxins

Warm, nutrient-rich, long-detention Arizona reservoirs and canals are excellent algae habitat.

Taste and Odor Compounds

The two dominant culprits are geosmin and 2-methylisoborneol (MIB) , produced by cyanobacteria (blue-green algae) and actinomycetes.

Geosmin produces an earthy, beet-like odor. MIB produces a musty, camphor-like odor.

Human detection thresholds are around 5 to 10 nanograms per liter — parts per trillion . Customers will complain at concentrations far below any health concern.

Neither is removed by conventional coagulation, sedimentation, and filtration, and free chlorine does not destroy them. Chlorinating a taste and odor event can make it worse by lysing algal cells and releasing more compound.

Effective controls: powdered activated carbon (PAC) dosed ahead of treatment, granular activated carbon contactors, ozone , or advanced oxidation. Source control includes reservoir aeration or destratification, and algaecide application, usually copper sulfate.

Note

Copper sulfate application is a judgment call. It kills algae, but cell lysis releases intracellular taste and odor compounds and, for toxin-producing cyanobacteria, intracellular toxins. Treating a heavy cyanobacterial bloom with an algaecide immediately upstream of an intake can create a worse problem than it solves.

Cyanotoxins

Harmful algal blooms of Microcystis , Anabaena (Dolichospermum), and Cylindrospermopsis can produce microcystins , cylindrospermopsin , anatoxin-a , and saxitoxins . EPA has issued health advisories for microcystins and cylindrospermopsin and lists cyanotoxins for monitoring consideration. Operating principle: keep cells intact through coagulation, sedimentation, and filtration so that toxins remain inside the cells and are physically removed, rather than lysing cells and releasing dissolved toxin that then requires oxidation or activated carbon.

Invasive Species

Quagga mussels are established in the Colorado River system and therefore in CAP-delivered water. They colonize intake structures, screens, trash racks, and raw water piping, restricting flow, fouling instruments, and creating taste and odor and corrosion problems when they die and decay. Control combines continuous or periodic chlorination at the intake, antifouling coatings, mechanical removal, and vigilance at boat launches. Non-native plant species such as salt cedar (tamarisk) along reservoir margins consume large volumes of water and alter shoreline conditions, which is why the NTK lists them among the inspection items.

Monsoon Turbidity

Arizona's summer monsoon delivers intense, short-duration storms onto sparsely vegetated watersheds, generating flash runoff that can raise raw water turbidity from a few nephelometric turbidity units to hundreds or thousands within hours. Operators respond by adjusting the intake depth, sharply increasing coagulant dose (confirmed by jar testing), adding a coagulant aid polymer, reducing plant flow rate to preserve settling and filtration performance, and shortening filter runs. Watershed erosion, wildfire burn scars, and post-fire debris flows all make these events worse and are legitimate inspection concerns.