Study guide
4.2 Coagulation Chemistry, Coagulants & Jar Testing
Arizona Water/Wastewater Operator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Arizona Regulatory Framework & ADEQ Certification
1.1 ADEQ Operator Certification Rules & Grade Structure 1.2 Facility Classification & Operator in Direct Responsible Charge (ODRC) 1.3 Arizona Aquifer Protection Permit (APP) Program & BADCT 1.4 AZPDES Surface Water Discharges & Arizona Reclaimed Water Standards 1.5 The WPI Need-to-Know Criteria: What Is Actually on Your Exam
2 Chapter 2: Federal Drinking Water & Clean Water Act Compliance
2.1 Safe Drinking Water Act (SDWA) Primary & Secondary MCLs 2.2 Surface Water Treatment Rules & Revised Total Coliform Rule (RTCR) 2.3 Stage 1 & Stage 2 Disinfectants/Disinfection Byproducts Rules (D/DBPR)
3 Chapter 3: Source Water Assessment, Wells & Watershed Protection
3.1 Groundwater Sources, Well Components & Water Level Measurement 3.2 Surface Water Sources, Intakes & Reservoir Management 3.3 Watershed Management, Contamination Sources & Public Education 3.4 Pretreatment: Aeration, Presedimentation & Algae Control
4 Chapter 4: Source Water Quality, Coagulation & Flocculation
4.1 Arizona Source Water Quality & Arid Climate Challenges 4.2 Coagulation Chemistry, Coagulants & Jar Testing 4.3 Flocculation Basin Design & Process Control 4.4 Sedimentation Basins, Clarifiers & Solids Contact Units
5 Chapter 5: Filtration Systems & Advanced Separation
5.1 Granular Media Filtration Principles & Media Types 5.2 Filter Backwash Operations, Ripening & Filter-to-Waste 5.3 Membrane Filtration & Reverse Osmosis Desalination 5.4 Ion Exchange Softening, Arsenic Removal & GAC Adsorption
6 Chapter 6: Drinking Water Disinfection & Chemical Oxidation
6.1 Chlorine Chemistry & Break-Point Chlorination 6.2 The CT Disinfection Concept & Basin Hydraulics 6.3 Alternative Disinfectants: Chloramines, Ozone, UV & Chlorine Dioxide
7 Chapter 7: Specialized Drinking Water Treatment & Chemical Conditioning
7.1 Iron & Manganese Removal 7.2 Fluoridation: Chemicals, Dosage & Safety 7.3 Corrosion Control, Saturation Indices & the Lead and Copper Rule 7.4 Water Treatment Plant Residuals Handling & Disposal
8 Chapter 8: Water Treatment Plant Equipment Operation & Maintenance
8.1 Raw Water Intake, Screening & Pumping Equipment 8.2 Chemical Feed Equipment, Storage & Metering 8.3 Instrumentation, Online Analyzers, SCADA & Calibration 8.4 Valves, Motors, Auxiliary Systems & Maintenance Programs
9 Chapter 9: Wastewater Preliminary, Primary & Biological Treatment Principles
9.1 Wastewater Characteristics & Preliminary Treatment 9.2 Primary Clarification Design & Settling Mechanics 9.3 Biological Treatment Kinetics & Microbiology
10 Chapter 10: Activated Sludge Processes & Nutrient Removal
10.1 Activated Sludge Configurations & Operational Mass Balance 10.2 Process Control Parameters, Settleability & Troubleshooting 10.3 Biological Nutrient Removal: Nitrification, Denitrification & Phosphorus Removal
11 Chapter 11: Fixed-Film, Lagoon & Advanced Secondary Processes
11.1 Trickling Filters & Attached Growth Fundamentals 11.2 Rotating Biological Contactors & Hybrid Processes 11.3 Stabilization Ponds & Lagoon Systems 11.4 Membrane Bioreactors
12 Chapter 12: Tertiary Treatment, Wastewater Disinfection & Effluent Management
12.1 Tertiary Filtration & Advanced Effluent Polishing 12.2 Wastewater Chlorination & Dechlorination 12.3 Ultraviolet & Ozone Disinfection of Wastewater 12.4 Effluent Disposal, Reclaimed Water Reuse & Permit Compliance
13 Chapter 13: Residuals Management & Sludge Processing
13.1 Sludge Thickening & Digestion Processes 13.2 Sludge Dewatering Technologies & Drying Beds 13.3 EPA Part 503 Biosolids Rules & Arizona Beneficial Use
14 Chapter 14: Wastewater Plant Equipment Operation & Maintenance
14.1 Preliminary & Primary Treatment Equipment 14.2 Aeration Systems, Blowers, Diffusers & Dissolved Oxygen Control 14.3 Wastewater Pumps, Mixers & Chemical Dosing Equipment 14.4 Electrical Systems, Online Analyzers & Auxiliary Power
15 Chapter 15: Water Distribution Infrastructure & Hydraulic Management
15.1 Water Main Materials, Fittings & Appurtenances 15.2 Water Storage, Pressure Management & Water Age 15.3 Cross-Connection Control & Backflow Prevention 15.4 Main Maintenance, Unidirectional Flushing & Leak Detection 15.5 Distribution Hydraulics, Head Loss & C-Factor 15.6 System Mapping, GIS, Plans & Distribution SCADA
16 Chapter 16: Water Main Installation, Repair & Disinfection
16.1 Main & Service Line Installation, Tapping & Thrust Restraint 16.2 New Construction Inspection, Pressure Testing & Utility Locating 16.3 Disinfection of Mains, Storage Facilities & Repaired Components 16.4 Booster Stations, Meters & Storage Facility Inspection
17 Chapter 17: Distribution Water Quality Management & Field Testing
17.1 Distribution Chemical Feed, Dosage Adjustment & Booster Chlorination 17.2 Distribution Sampling Programs & Field Analyses 17.3 Chemical Transport, Storage & Handling in Distribution Operations 17.4 Interpreting Water Quality Data, Complaints & Nitrification Control
18 Chapter 18: Wastewater Collection Systems & Lift Stations
18.1 Gravity Sewer Design, Piping Materials & Manholes 18.2 Inflow & Infiltration (I&I) Assessment & Pipeline Rehabilitation 18.3 Wastewater Lift Stations, Pump Types & Force Mains 18.4 Hydrogen Sulfide Corrosion, Odor Control & Line Cleaning 18.5 Excavation, Heavy Equipment & Surface Restoration
19 Chapter 19: Collection System Cleaning, Inspection & Rehabilitation
19.1 Hydraulic Cleaning, Rodding & Blockage Removal 19.2 CCTV Inspection, Condition Assessment & FOG Control 19.3 Trenchless Rehabilitation: CIPP, Pipe Bursting & Lining 19.4 SSO Response, Flow Monitoring & Capacity Assurance
20 Chapter 20: Laboratory Testing, Quality Control & Monitoring
20.1 Drinking Water Analytical Methods & Compliance Testing 20.2 Wastewater Laboratory Analytics & Process Control Tests 20.3 Sampling Protocols, Chain of Custody & Laboratory QA/QC 20.4 Emerging Contaminants, PFAS & Advanced Analytical Methods
21 Chapter 21: Utility Safety Programs & Emergency Preparedness
21.1 Lockout/Tagout, Electrical Safety & Arc Flash 21.2 Personal Protective Equipment, Fall Protection & Bloodborne Pathogens 21.3 Traffic Control & Work Zone Safety 21.4 Emergency Response Planning & Disaster Recovery 21.5 Heat Illness Prevention, Respiratory Protection & Hearing Conservation
22 Chapter 22: Security, Administration & Utility Management
22.1 Facility Security, Vulnerability Assessment & Cybersecurity 22.2 Recordkeeping, Standard Operating Procedures & Regulatory Reporting 22.3 Budgets, Procurement, Cost Analysis & Capital Improvement Planning 22.4 Asset Management, Energy Optimization & Water Loss Control 22.5 Supervision, Training, Customer Service & Public Communication
23 Chapter 23: Applied Operator Mathematics, Pumping Hydraulics & Utility Safety
23.1 Chemical Feed Calculations & Dosage Problem Solving 23.2 Geometric Volumes, Hydraulic Loading & Detention Time Math 23.3 Pumping Mechanics, System Head & Horsepower Calculations 23.4 Plant Safety: Confined Spaces, Chemical Hazards & OSHA Standards 23.5 Unit Conversions & Using the Supplied Formula/Conversion Table 23.6 Percent Removal, Process Efficiency & Solution Blending
4.2 Coagulation Chemistry, Coagulants & Jar Testing
Key Takeaways Explain This Topic AI
Colloidal particles in raw water maintain physical suspension due to negative surface charges generating electrostatic repulsion and a negative zeta potential (-15 to -30 mV) that overpowers attractive van der Waals forces.
Primary coagulation destabilizes colloids through charge neutralization at stoichiometric dosages or sweep coagulation (enmeshment) at higher dosages where precipitated metal hydroxides mechanically trap particles.
Commercial aluminum sulfate (alum) consumes approximately 0.5 mg/L of natural alkalinity as CaCO₃ for every 1.0 mg/L of alum applied, requiring supplemental base addition (lime, soda ash, or caustic soda) if natural alkalinity is low.
Flash mixing requires high velocity gradients (G > 700 to 1,000 s⁻¹) and short detention times (1 to 5 seconds) to disperse coagulants before hydrolysis reactions complete, while Streaming Current Detectors provide automated dose pacing.
Last updated: September 2026
4.2 Coagulation Chemistry, Coagulants & Jar Testing
Note
Process Control Reality : Coagulation is the single most critical chemical barrier in conventional surface water treatment. If coagulation fails to destabilize sub-micron colloids, subsequent flocculation, sedimentation, and granular media filtration cannot achieve regulatory pathogen removal limits. Operators must thoroughly understand coagulant hydrolysis, alkalinity stoichiometry, and jar testing mechanics to adapt to changing raw water supplies.
Raw surface waters carry thousands of tiny particles—clay, silt, organic humic acids, bacteria, and viruses. Because these particles are microscopic and naturally repel one another, gravity alone cannot settle them within reasonable plant detention times. Coagulation is the chemical destabilization of these charged particles, allowing them to adhere and agglomerate.
Colloidal Stability, Surface Chemistry & Zeta Potential
To understand why chemical coagulants are necessary, operators must grasp the physical forces governing colloidal suspensions in water. Diffuse Gouy-Chapman Layer
- ┌─────────────────────────┐
- │ + + + + + │
- │ + + + + │
- │ ┌───────────────────┐ │
- │ │ Stern Layer │ │
- │ │ + + + + │ │
- │ │ ┌───────────────┐ │ │
- │ │ │ - - - - - - - │ │ │
- │ │ │ Colloidal │ │ │
- │ │ │ Particle │ │ │
- │ │ │ - - - - - - - │ │ │
- │ │ └───────────────┘ │ │
- │ │ + + + + │ │
- │ └───────────────────┘ │
- │ ▲ │
- └──┼──────────────────────┘
- │
- Shear / Slipping Plane
- (Zeta Potential: -15 to -30 mV)
- The Nature of Colloids
Colloids are suspended particles ranging from 0.001 to 1.0 micron (µm) in size. Because they possess an immense surface area relative to their microscopic mass, surface electrostatic forces completely overwhelm gravity. A 0.1 µm clay colloid would take hundreds of days to settle just one foot through quiescent water.
Origin of Surface Charges
In natural drinking water supplies (pH 6.5 to 8.5), colloids carry a net negative electrical surface charge . This negative charge arises from two primary mechanisms:
Isomorphous Substitution : In mineral clays (montmorillonite, kaolinite), higher-valence metal ions in the crystal lattice are replaced by lower-valence cations (e.g., Al³⁺ substituting for Si⁴⁺), producing a permanent net negative crystal charge.
Ionization of Functional Groups : Humic and fulvic organic acids possess carboxyl (–COOH) and phenolic hydroxyl (–OH) functional groups that dissociate in water, leaving negatively charged carboxylate (–COO⁻) and phenolate (–O⁻) sites on the particle exterior.
The Electrical Double Layer
Because the colloidal surface is negatively charged, it attracts positively charged ions (cations, or counter-ions) from the surrounding water, forming an electrical double layer :
Stern Layer : A thin, rigid layer of positively charged counter-ions held tightly against the negative particle surface by strong electrostatic attraction.
Diffuse Layer (Gouy-Chapman Layer) : An outer, mobile cloud of counter-ions that gradually decreases in concentration until electroneutrality with bulk water is reached.
Zeta Potential vs. Van der Waals Forces
As a colloidal particle moves through water, the tightly bound Stern layer and a portion of the diffuse layer move with it. The boundary between this moving fluid packet and the bulk water is the shear plane (slipping plane) .
Zeta Potential (ZP) : The electrical potential measured at the slipping plane, expressed in millivolts (mV). In stable natural waters, colloids exhibit a zeta potential between -15 and -30 mV . This negative charge creates strong mutual electrostatic repulsion between approaching particles.
Van der Waals Forces : Universal, short-range attractive forces that exist between all mass particles. However, van der Waals attraction drops off steeply with distance.
Colloidal Stability : Under natural conditions, the repulsive electrostatic energy barrier generated by negative zeta potential prevents particles from approaching close enough for attractive van der Waals forces to engage. Particles bounce apart upon collision, remaining in permanent suspension.
Destabilization Goal : Adding chemical coagulants collapses the electrical double layer, reducing the zeta potential to near-neutral ( between -5 and +5 mV ). When electrostatic repulsion drops below the van der Waals attraction, colliding particles stick together.
Primary Coagulation Mechanisms
Coagulation proceeds through three distinct physical-chemical pathways depending on chemical dosage, pH, and raw water solids concentration. +--------------------------------------------------------------------------------+
- | Primary Coagulation Mechanisms |
- +--------------------------------------------------------------------------------+
- | Mechanism | Operating Conditions | Physical Description |
- |------------------------+----------------------------+--------------------------|
- | 1. Charge | Low to moderate dosage; | Trivalent cations |
- | Neutralization | stoichiometric dose tied | (Al³⁺, Fe³⁺) adsorb |
- | | to colloidal surface area | directly to neutralize ZP|
- | 2. Sweep Coagulation | Moderate to high dosage; | Metal salt exceeds |
- | (Enmeshment) | higher pH; indispensable | solubility; precipitate |
- | | for low-turbidity waters | physically traps colloids|
- | 3. Inter-Particle | High-molecular-weight | Long polymer chains bind |
- | Bridging | synthetic polymers; | to multiple particles |
- | | organic polymers | forming structural web |
- +--------------------------------------------------------------------------------+
- 1. Charge Neutralization (Adsorption-Destabilization)
When trivalent metal salts (alum or ferric) dissolve in water, they rapidly dissociate and hydrolyze into highly charged polynuclear cationic complexes (such as Al₈(OH)₂₀⁴⁺ or Fe₃(OH)₄⁵⁺). These positively charged species adsorb directly onto the negatively charged surfaces of colloids within milliseconds, neutralizing the surface charge and collapsing the double layer.
Stoichiometric Requirement : The required coagulant dose is directly proportional to the surface area and concentration of colloids.
Risk of Restabilization : If an operator overdoses coagulant under charge-neutralization conditions, excess positive ions adsorb onto particles, flipping the zeta potential to a positive value (+15 to +30 mV). The colloids restabilize with positive charges and refuse to settle.
2. Sweep Coagulation (Enmeshment)
When metal coagulant is applied in concentrations that exceed the solubility limit of the metal hydroxide at the operating pH, the metal ions precipitate out as amorphous aluminum hydroxide [Al(OH)₃] or ferric hydroxide [Fe(OH)₃] .
The "Sweep Net" Effect : These precipitates form voluminous, sticky, amorphous floc clouds. As these dense precipitates settle through the water column, they physically collide with, entrap, and sweep colloidal particles down with them.
Low-Turbidity Water : In clear waters (raw turbidity <5 NTU), particle concentrations are too sparse for charge neutralization alone to cause collisions. Operators must apply higher coagulant doses to force sweep coagulation, creating artificial precipitate bulk to capture the sparse colloids.
3. Inter-Particle Bridging
Bridging occurs when high-molecular-weight synthetic polymers are introduced. A single long-chain polymer molecule attaches chemically or electrostatically to adsorption sites on two or more distinct colloidal particles simultaneously, forming an extended physical bridge that links microfloc into massive, shear-resistant clusters.
Primary Chemical Coagulants & Alkalinity Consumption
Water utilities select primary coagulants based on raw water pH, temperature, buffering capacity, and sludge handling infrastructure.
Coagulant Name Chemical Formula Effective pH Window Alkalinity Consumed (mg/L CaCO₃ per mg/L coagulant) Operational Advantages / Disadvantages
Aluminum Sulfate (Alum) Al₂(SO₄)₃·14H₂O 5.8 to 7.5 ~0.50 mg/L Inexpensive, standard benchmark; narrow pH window; temperature sensitive in cold water
Ferric Chloride FeCl₃ 4.0 to 11.0 0.92 mg/L Wide pH range; forms heavy, fast-settling floc; highly corrosive; stains equipment
Ferric Sulfate Fe₂(SO₄)₃ 4.0 to 11.0 0.75 mg/L Dense floc; effective in cold water and high-pH softening; corrosive liquid/dry handling
Polyaluminum Chloride (PAC) Al_n Cl_{3n-m}(OH)_m 6.0 to 9.0 0.15 to 0.30 mg/L Pre-hydrolyzed; minimal alkalinity consumption; superior cold-water kinetics; lower sludge
Aluminum Sulfate (Alum) Chemistry & Alkalinity Depletion
Commercial filter alum is an acidic hydrated salt. When injected into raw water, alum reacts with natural calcium and magnesium bicarbonate alkalinity to form insoluble aluminum hydroxide floc: Al 2 ( SO 4 ) 3 ⋅ 14 H 2 O + 3 Ca(HCO 3 ) 2 → 2 Al(OH) 3 ↓ + 3 CaSO 4 + 6 CO 2 + 14 H 2 O \text{Al}_2(\text{SO}_4)_3\cdot 14\text{H}_2\text{O} + 3\text{Ca(HCO}_3)_2 \rightarrow 2\text{Al(OH)}_3\downarrow + 3\text{CaSO}_4 + 6\text{CO}_2 + 14\text{H}_2\text{O} Al 2 ( SO 4 ) 3 ⋅ 14 H 2 O + 3 Ca(HCO 3 ) 2 → 2 Al(OH) 3 ↓ + 3 CaSO 4 + 6 CO 2 + 14 H 2 O
Alkalinity Consumption Factor : Every 1.0 mg/L of commercial dry alum consumes approximately 0.50 mg/L (nominally 0.45 to 0.50 mg/L) of natural alkalinity as CaCO₃ .
The Alkalinity Crash : If raw water possesses insufficient natural alkalinity (<40 to 50 mg/L as CaCO₃), the acid generated by alum addition consumes all available bicarbonate buffering, causing water pH to plummet below 5.5. At this depressed pH:
Aluminum hydroxide cannot precipitate and remains as soluble, toxic Al³⁺ or Al(OH)²⁺ ions.
Floc formation ceases, and cloudy, uncoagulated water passes directly to the filters.
Finished water contains high dissolved aluminum residuals (>0.2 mg/L) and becomes aggressively corrosive to distribution piping.
Supplemental Alkalinity : Operators treating low-alkalinity waters must feed chemical bases ahead of or alongside alum:
Hydrated Lime [Ca(OH)₂] : Conserves/restores alkalinity; adds calcium.
Soda Ash [Na₂CO₃] : Restores carbonate alkalinity without increasing calcium hardness.
Caustic Soda [NaOH] : Concentrated liquid base; raises pH rapidly with low chemical sludge production.
Ferric Salts: Ferric Chloride & Ferric Sulfate
Iron salts provide distinct chemical advantages over alum in many desert surface water treatment plants:
Broader Operating Range : Ferric coagulants function across a wide pH window (4.0 to 11.0), making them exceptionally effective for coagulating high-pH, high-alkalinity waters (such as CAP canal water) without requiring acid addition.
Floc Density : Ferric hydroxide [Fe(OH)₃] precipitates are substantially denser and heavier than alum floc, resulting in significantly higher settling velocities in clarifiers.
Higher Alkalinity Consumption : Liquid ferric chloride consumes 0.92 mg/L of alkalinity as CaCO₃ per 1.0 mg/L of anhydrous FeCl₃ —nearly double that of alum.
Corrosivity : Ferric chloride solutions have a pH < 2.0 and severely corrode mild steel, stainless steel, and concrete, demanding titanium, PVDF, rubber-lined, or fiberglass-reinforced chemical feed systems.
Coagulant Aids & Synthetic Polymers
To improve floc formation and structural strength, operators utilize synthetic and natural polymers as coagulant aids:
Cationic Polymers (e.g., PolyDADMAC, Epi-DMA): Positively charged, low-to-medium molecular weight polymers. They function as primary coagulants or coagulant aids for charge neutralization, reducing required metal coagulant dosages by 50% to 75% and dramatically reducing aluminum chemical sludge production.
Anionic Polymers (hydrolyzed polyacrylamides): Negatively charged, high-molecular-weight polymers. Used downstream as flocculant aids to link microfloc into massive macrofloc via inter-particle bridging.
Non-Ionic Polymers : Uncharged polyacrylamides used for bridging and strengthening floc against hydraulic shear.
Weighting Agents : Finely ground bentonite clay or calcium carbonate added to low-turbidity waters to provide ballast and increase particle collision frequency.
Flash Mixing (Rapid Mix) Hydraulics & Design Standards
The primary objective of the flash mix is to achieve instantaneous, homogeneous dispersion of coagulant chemicals throughout the incoming raw water stream. Influent Raw Water ───> [ High-Energy Flash Mix ] ───> Rapid Microfloc Formation
- │
- Coagulant Injected
- G > 700 - 1,000 s⁻¹
- Detention Time: 1 - 5 Seconds
- Why High Energy & Low Detention Time Are Critical
When alum or ferric salts enter water, the formation of positively charged primary hydrolysis species occurs within fractions of a second (100 to 500 milliseconds) . If chemicals are not uniformly blended across every cubic inch of water within that instant:
A portion of the stream is overdosed, causing local charge reversal and chemical waste.
The remaining stream is underdosed, leaving colloids uncoagulated.
Flash mix requires an intense velocity gradient ( G > 700 to 1,000 s⁻¹ ).
Detention time must be extremely brief—typically 1 to 5 seconds for in-line systems, and no more than 10 to 30 seconds for mechanical chambers. Prolonged violent agitation will fracture newly formed microfloc.
Common Flash-Mix Technologies
In-Line Static Mixers : Fixed geometric helical elements installed inside the raw water pipeline. High-velocity pipe flow across the elements generates violent turbulence with zero moving mechanical parts.
Mechanical Impellers : Vertical high-speed radial-flow or axial-flow turbines installed in small square or circular contact chambers.
Hydraulic Jumps : Utilizing the dissipation of kinetic energy where water drops over a weir or passes through a Parshall flume from high-velocity supercritical flow into subcritical flow. Highly reliable with zero electrical power demand.
The Standard 6-Gang Jar Testing Protocol
The jar test is the foundational bench-scale laboratory simulation used by water operators to establish optimal coagulant dosage, coagulant aid selection, and target pH. Jar 1 Jar 2 Jar 3 Jar 4 Jar 5 Jar 6
- +-------+ +-------+ +-------+ +-------+ +-------+ +-------+
- | 10 ppm| | 15 ppm| | 20 ppm| | 25 ppm| | 30 ppm| | 35 ppm|
- | Alum | | Alum | | Alum | | Alum | | Alum | | Alum |
- +-------+ +-------+ +-------+ +-------+ +-------+ +-------+
- │ │ │ │ │ │
- └──────────┴──────────┴────┬─────┴──────────┴──────────┘
- ▼
- 1. Rapid Mix: 100-300 RPM for 1 min
- 2. Flocculation: 30-40 RPM for 15 min
- 3. Settling: Quiescent for 15-20 min
- 4. Sample Supernatant Turbidity & pH
- Standardized Laboratory Procedure
Apparatus Setup : Use a 6-gang laboratory stirrer equipped with square 2-liter jars (B-Ker jars). Square jars are essential because flat walls eliminate vortex formation, simulating basin baffled flow without requiring internal baffles.
Sample Loading : Collect fresh, unchlorinated raw water and fill all six jars to the 2.0-liter line. Measure and record baseline raw water temperature, turbidity, pH, and alkalinity.
Dosing Sequence : Add incremental dosages of coagulant across the jars (e.g., 10, 15, 20, 25, 30, and 35 mg/L) while the paddles run at low speed, or inject simultaneously using a multi-syringe manifold.
Simulation Stages :
Rapid Mix Stage : Spin paddles at 100 to 300 rpm (G ≈ 300 to 500 s⁻¹) for 1 minute to simulate the plant flash mixer.
Flocculation Stage : Drop paddle speed to 30 to 40 rpm for 15 minutes , followed by 15 rpm for 5 minutes , to simulate multi-stage tapered flocculation basins.
Settling Stage : Stop paddle rotation, raise paddles out of the jars, and allow quiescent settling for 15 to 20 minutes to simulate clarifier retention.
Observation & Analytical Evaluation :
Observe and record the time to first visible pin-point floc formation (e.g., <2 minutes is ideal).
Assess floc size and structural density (feather-like vs. dense ball-like aggregates).
Measure settling velocity (inches of clarified supernatant cleared per minute).
Siphon supernatant liquid from the sampling port located 2 inches below the water surface in each jar.
Analyze supernatant for turbidity (NTU) , finished pH, and residual alkalinity.
Selection Criteria : The optimal dose is not simply the dosage that yields the lowest turbidity. It is the lowest chemical dose that reliably produces a stable, fast-settling floc leaving a clarified supernatant turbidity <1.0 to 2.0 NTU , while preserving adequate residual alkalinity and minimizing chemical costs and sludge generation.
Automated Process Control: Streaming Current Detectors (SCD)
While jar testing provides static batch optimization, raw water quality can swing abruptly during storms or canal source switching. Modern water treatment plants employ Streaming Current Detectors (SCD) for automated, real-time coagulant dose pacing.
Principle of Operation
A continuous sample of coagulated water (drawn immediately downstream of the flash mixer) flows into a measurement chamber housing a reciprocating piston and cylinder.
Colloidal particles in the sample adsorb onto the stationary walls of the cylinder, carrying their diffuse layer counter-ions with them.
As the motor-driven piston oscillates up and down at high frequency, it shears the mobile counter-ions away from the adsorbed particles.
The displacement of these charged counter-ions creates a microscopic alternating electrical current—the streaming current .
This current is measured by electrodes at opposite ends of the cylinder, amplified, and displayed as a dimensionless Streaming Current Value (typically ranging from -100 to +100).
Closed-Loop Chemical Feed Automation
Because streaming current directly correlates with the net colloidal surface charge (zeta potential), it provides immediate feedback on chemical performance:
If raw water turbidity or TOC increases, unneutralized negative colloids increase, causing the streaming current value to drop negative. The plant SCADA controller senses the deficit and automatically ramps up coagulant metering pump speed.
If raw turbidity drops or coagulant is overdosed, streaming current shifts positive toward charge reversal. The controller throttles back the chemical feed rate, preventing chemical waste and filter blinding.