Study guide

4.1 Monitor Classification with Data Explorer and Content Explorer

SC-401: Administering Information Security in Microsoft 365 Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current SC-401 Exam Facts 1.2 Scoring, Retakes, and Annual Renewal 1.3 Role, Blueprint, and Prep Path

2 Data Classification Foundations

2.1 Identify Sensitive Information Requirements 2.2 Translate Requirements into Sensitive Info Types 2.3 Create and Manage Custom Sensitive Info Types

3 Specialized Classification Methods

3.1 Document Fingerprinting 3.2 Exact Data Match Sensitive Info Types 3.3 Trainable Classifiers

4 Classification Monitoring and OCR

4.1 Monitor Classification with Data Explorer and Content Explorer 4.2 Configure OCR Support for Sensitive Info Types

5 Sensitivity Label Design

5.1 Roles and Permissions for Sensitivity Labels 5.2 Define and Create Sensitivity Labels for Items and Containers 5.3 Protection Settings and Content Marking

6 Label Policies, Containers, and Defender for Cloud Apps

6.1 Configure Publishing Policies for Sensitivity Labels 6.2 Configure Auto-Labeling Policies 6.3 Apply Sensitivity Labels to Containers 6.4 Apply Sensitivity Labels with Microsoft Defender for Cloud Apps

7 Information Protection Client and Scanner

7.1 Plan and Implement the Microsoft Purview Information Protection Client 7.2 Manage Files with the Information Protection Client 7.3 Bulk Classification with the Information Protection Scanner

8 Microsoft Purview Message Encryption

8.1 Design and Implement Microsoft Purview Message Encryption 8.2 Design and Implement Advanced Message Encryption

9 DLP Policy Design

9.1 Design Data Loss Prevention Policies 9.2 Roles and Permissions for Data Loss Prevention 9.3 Create and Manage DLP Policies

10 Adaptive Protection, DLP Precedence, and MDCA File Policies

10.1 Configure DLP Policies for Adaptive Protection 10.2 Interpret DLP Policy and Rule Precedence 10.3 Create File Policies in Defender for Cloud Apps Using DLP

11 Endpoint DLP Configuration

11.1 Device Requirements for Endpoint DLP Including Extensions 11.2 Configure Advanced DLP Rules for Devices 11.3 Configure Endpoint DLP Settings

12 Just-in-Time Protection and Endpoint Monitoring

12.1 Configure Just-in-Time Protection 12.2 Monitor Endpoint Activities

13 Retention Labels and Adaptive Scopes

13.1 Plan Information Retention and Disposition with Retention Labels 13.2 Create and Manage Adaptive Policy Scopes 13.3 Create Retention Labels for Data Lifecycle Management

14 Publishing, Auto-Apply, and Retention Precedence

14.1 Publish Retention Labels 14.2 Auto-Apply Retention Labels 14.3 Retention Precedence and Policy Lookup

15 Retention Policies and Recovering Retained Content

15.1 Create and Configure Retention Policies 15.2 Recover Retained Content in Microsoft 365

16 Insider Risk Management Foundation

16.1 Roles and Permissions for Insider Risk Management 16.2 Plan and Implement Insider Risk Management Connectors 16.3 Integrate Insider Risk Management with Microsoft Defender for Endpoint

17 IRM Settings, Indicators, and Templates

17.1 Configure Insider Risk Management Settings 17.2 Configure Policy Indicators 17.3 Select an Appropriate Policy Template

18 IRM Policies, Forensic Evidence, and Adaptive Protection

18.1 Create and Manage Insider Risk Management Policies 18.2 Manage Forensic Evidence Settings 18.3 Enable Insider Risk Levels for Adaptive Protection

19 IRM Alerts, Cases, and Workflow

19.1 Manage Insider Risk Alerts and Cases 19.2 Insider Risk Workflow and Notice Templates

20 Purview Audit and Activity Explorer

20.1 Assign Microsoft Purview Audit (Premium) User Licenses 20.2 Investigate Activities with Microsoft Purview Audit 20.3 Configure Audit Retention Policies 20.4 Analyze Purview Activities with Activity Explorer

21 DLP, Insider Risk, and Defender XDR Alert Response

21.1 Respond to DLP Alerts in the Microsoft Purview Portal 21.2 Investigate Insider Risk Activities in the Microsoft Purview Portal 21.3 Respond to Purview Alerts in Microsoft Defender XDR

22 MDCA File Policy Alerts and eDiscovery

22.1 Respond to Defender for Cloud Apps File Policy Alerts 22.2 Perform Searches by Using eDiscovery

23 Protecting Content Used by AI Services

23.1 Implement Purview Controls for AI Services 23.2 Implement Microsoft 365 Workload Controls for AI

24 Data Security Posture Management for AI

24.1 Prerequisites for DSPM for AI 24.2 Manage Roles and Permissions for DSPM for AI 24.3 Configure DSPM for AI Policies 24.4 Monitor Activities in DSPM for AI

4.1 Monitor Classification with Data Explorer and Content Explorer

Key Takeaways Explain This Topic AI

Data explorer and Content explorer (classic) show a current snapshot of items that already have a sensitivity label, retention label, sensitive information type (SIT) match, or trainable classifier match—not a 30-day activity log.

Compliance administrator (and similar tab-level roles) do not grant item listing or file preview. List viewer shows locations; Content viewer is required to preview contents and to see item names that may contain sensitive data.

Explorer counts can take up to seven days to update, and up to 14 days for SharePoint files. Encrypted sensitivity labels on SharePoint and OneDrive do not surface; encrypted document preview and download are disabled.

Activity explorer, Purview Audit, and eDiscovery answer different questions (recent actions, longer audit trail, legal search/hold) and are not substitutes for classification inventory.

Published licensing: Content Explorer and Activity Explorer analytics interfaces require E5-class plans (or Office 365 E5); E3-class tenants still receive Content Explorer data aggregation.

Last updated: August 2026

Monitor classification with Data explorer and Content explorer

Quick Answer: Data explorer and Content explorer (classic) show a current snapshot of items that already have a sensitivity label, a retention label, a sensitive information type (SIT) match, or a trainable classifier match. They are inventory tools. Activity explorer answers “what did someone do?” for about 30 days . Purview Audit is the longer audit trail. eDiscovery is how you search and hold items for a case (the July 28, 2026 SC-401 list uses eDiscovery, not the older Content search wording).

Microsoft Purview classifies content before you publish a DLP or auto-labeling policy. Microsoft calls that zero change management : the platform scans for built-in SITs, labels, and classifiers so you can see the blast radius of a future policy. The SC-401 bullet Monitor data classification and label usage by using Data explorer and Content explorer tests whether you know which explorer answers which question and whether you can assign the least-privilege roles that actually open item lists and previews.

Where the explorers live

In the Microsoft Purview portal , open Solutions > Information Protection > Explorers . You will see three related surfaces; only the first two are this skill:

Data explorer — the current, consolidated view of classified and labeled items. Information Protection Reports (sensitivity label usage, SIT concentration, trainable classifier usage, data sources with sensitive info) link here when you leave a chart and inspect the underlying items.

Content explorer (classic) — the older, location-based browse experience. Microsoft Learn still titles the product doc Get started with Content Explorer (classic) . You can also reach it from Data Lifecycle Management > Explorers > Content explorer .

Activity explorer — not an inventory. It is a transformed view of Microsoft 365 unified audit logs covering up to 30 days of actions on labeled and sensitive content. It belongs to Analyze Purview activities by using Activity explorer in the alerts-and-activities domain, not this classification-monitoring bullet.

Use Data explorer for most analysis. Use Content explorer (classic) when you need the older location-drill UI, saved views keyed to specific SITs and labels, or a procedure written against the classic tool. Microsoft Learn’s SC-401-aligned training is explicit: Data explorer is the unified interactive view; Content explorer (classic) remains for continuity and does not replace Data explorer’s report-linked investigation path.

What “monitor classification and label usage” actually means

Both explorers show a snapshot of items that are already classified or labeled , not a live catalog of every file in the tenant and not a who-did-what timeline.

Signal What the explorers show Prerequisite that trips exam items

Sensitive information types Items that matched a built-in or custom SIT (credit card, national ID, custom pattern, and so on) The item must have been scanned; a SIT that exists but has never matched anything appears empty

Sensitivity labels Items tagged with labels such as Confidential or Highly Confidential You must enable sensitivity labels for files in SharePoint and OneDrive or those files never surface on the data classification page

Retention labels Items with a retention or records label Explorers snapshot labeled items; Activity explorer does not monitor Exchange retention activities

Trainable classifiers Items the classifier identified from examples rather than a regex Match / Not a match feedback is documented for SharePoint and OneDrive matched items

Encrypted sensitivity labels do not surface in Content explorer for SharePoint and OneDrive. Document preview and download are disabled when a document is encrypted, so a Content viewer still cannot open the payload. That is a security control, not a misconfiguration.

When you update a SIT definition, existing files are not reclassified until someone modifies them. New files created after the change use the new definition. An item that says “I tightened the SIT but Content explorer still lists last month’s matches” is describing this behavior.

Counts are not real-time . Microsoft publishes that it can take up to seven days for counts to update in Data explorer and Content explorer, and up to 14 days for files in SharePoint . A labeled contract uploaded this morning that is missing from the count is usually latency, not a failed label policy.

Data explorer versus Content explorer

Capability Data explorer Content explorer (classic)

Job Unified snapshot of SITs, sensitivity labels, retention labels, and trainable classifiers Same classified-item universe, browsed by location

How you work Filter by label, classifier, or SIT, then drill Data source (Exchange, OneDrive, SharePoint, Teams, and connected sources such as Copilot in the current UI) Expand a label or SIT, then drill All locations through the folder tree

Reports Linked from Information Protection Reports for “explore applied labels / SITs” Opened separately from reports

Saved views Filter-centric investigation You can save customized views (SITs, sensitivity labels, trainable classifiers, retention labels) and mark a default view

Export Export writes a CSV of whatever the current pane is focused on Same CSV export of the current pane

Both tools let you double-click an item to open it natively in the explorer when you have Content viewer rights and the file is not encrypted. Neither tool places a hold, runs a case query, or builds a review set.

Filters you can actually search on

When you drill into a location, a Filter tool appears. Scope is whatever the locations pane is showing.

Exchange or Teams: search on the full mailbox address , for example user@contoso.com . Partial display names are the wrong mental model.

SharePoint or OneDrive: search on full site URL ( https://contoso.onmicrosoft.com/sites/sitename ), file name ( RES_Resume_1234.txt ), the prefix before an underscore ( RES ), the token after an underscore ( Resume or 1234 ), or the extension ( txt ).

Export is a listing of the current focus , not an automatic tenant-wide dump of every classified file. Filter first, then export.

Permissions: the exam’s favorite trap

Access is highly restricted because explorers can show the contents of scanned files. Those Purview roles supersede the SharePoint, OneDrive, or mailbox permissions on the item. A user who cannot open a file in OneDrive can still read it in Content explorer if you grant Content viewer. Treat that as a privileged investigation role, not a convenience add-on to Compliance administrator.

Microsoft documents two layers :

Reach the explorer tab. Entra ID / Microsoft 365 roles such as Compliance administrator, Security administrator, and Compliance data administrator (Data explorer’s tab list also includes Global administrator) get you onto the page. Information Protection Admin, Analyst, Investigator, and Reader roles, plus the matching Information Protection role groups, appear in the fine-tune list. Membership here does not let you see the item list or the file contents.

See items and contents. Independent role groups (you can also add the roles to a custom group):

Role group Underlying role What it allows

Content Explorer List viewer / Data Explorer List viewer data classification list viewer Each item and its location in list view

Content Explorer Content viewer / Data Explorer Content viewer data classification content viewer Contents of each item. Also required to see item names in list view, because names themselves can be sensitive

The two groups are not cumulative . List viewer alone never becomes a preview. If the account must both locate files and open them, assign both . Role Management holders in Purview assign these groups. Administrative units can further restrict list/content viewer members so they only see items in their AU.

Least privilege on SC-401: do not hand Global administrator to a classification analyst. Do not assume Compliance administrator can preview payment-card data in Content explorer. Microsoft recommends the role with the fewest permissions; Global administrator is documented as a last resort.

Accuracy feedback and previews

In Data explorer and Content explorer you can see how many matches a SIT or trainable classifier produced and mark Match or Not a match . That feedback is how you tune classifiers. Microsoft documents the contextual summary / feedback path for SharePoint and OneDrive matched items. Open the SIT link on a document to see which types matched and at what confidence, then use Contextual Summary to judge the hit.

Content explorer can preview Exchange email attachments without downloading the message for a published set of types (Office documents, PDF, text/CSV/HTML/XML/JSON/RTF, several source extensions, JPG/PNG/JPEG, and EML). Excel preview in Content explorer supports files up to 25 MB .

Licensing (published service description only)

The Microsoft Purview service description states that data classification analytics (the Content Explorer and Activity Explorer interfaces ) requires Microsoft 365 E5/A5/G5 , Microsoft 365 E5/A5/G5 Compliance, Microsoft 365 E5/A5/G5 Information Protection & Governance, or Office 365 E5 . Content Explorer data aggregation still runs on Microsoft 365 E3/A3/G3 and Office 365 E3 so the platform can keep counting even when the full analytics UI is not licensed. Microsoft does not publish a separate SKU row labeled only “Data explorer” in that table; treat Data explorer as part of the same data-classification analytics family and verify the current service description rather than inventing a unique SKU.

Loading diagram... Pick the right Purview surface for classification versus activity versus legal search

Do not pick the wrong Microsoft 365 search surface

SC-401 mixes four tools that all “find sensitive stuff.” Only Data explorer and Content explorer are this chapter.

Question Correct surface Why the others fail

How many items currently have label X or SIT Y, and where do they live? Data explorer (aggregated usage and drill-down) and Content explorer (item list with access controls) Activity explorer is actions, not inventory

Did someone downgrade a label, copy a file to USB, or hit a DLP rule? Activity explorer (about 30 days from unified audit) or Purview Audit for a longer search Explorers do not reconstruct who clicked what

Produce or hold mailbox/site content for a legal matter eDiscovery Explorers are not a case, hold, or review set

Confirm an activity that Activity explorer has not shown yet Audit (core workloads often take 60–90 minutes to appear in Activity explorer; Activity explorer is not real-time) Waiting on explorer counts will not surface an audit event

A practical monitoring workflow that matches the exam:

Open Information Protection Reports to see label coverage, top SITs, and where sensitive data concentrates.

Pivot into Data explorer for the classifier or label that looks wrong (too many credit-card hits in a public site, too few Highly Confidential files in Finance).

If you need the classic tree or a saved view of “only these 12 SITs,” open Content explorer .

Assign List viewer to people who may know that a file exists; add Content viewer only for investigators who must read it.

When the question is about a user action, leave this chapter’s tools and go to Activity explorer or Audit.

If you remember only three sentences: explorers are a snapshot of classified and labeled items , List viewer and Content viewer are independent and Content viewer is required for names and previews , and Activity explorer / Audit / eDiscovery are different jobs .