Study guide
4.1 Motorcycle Controls and Instruments
British Columbia Class 6/8 Motorcycle Knowledge Test Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 About the BC Motorcycle Knowledge Test 1.2 Class 6L vs Class 8L Pathways and the Graduated Licensing Program
2 You in the Rider's Seat
2.1 Rider Responsibility and Fitness to Ride 2.2 Motorcycle Vulnerability, Visibility, and Risk Management
3 You and Your Motorcycle — Riding Gear
3.1 Approved Helmets and Eye/Face Protection 3.2 Protective Clothing, High-Visibility Gear, Gloves, and Footwear 3.3 Motorcycle Types, Fit, and Budgeting for Motorcycling
4 Knowing Your Motorcycle
4.1 Motorcycle Controls and Instruments 4.2 Riding Posture and the Pre-Trip Check 4.3 Routine Maintenance and Periodic Inspection
5 Signs, Signals and Road Markings
5.1 Traffic Signs (Regulatory, Warning, Construction, Railway, Information) 5.2 Traffic Signals and Lane Control Signals 5.3 Pavement Markings (Yellow/White Lines and Reserved Lanes)
6 Rules of the Road
6.1 Intersections and Right-of-Way 6.2 Lane Use, Turning, and Passing 6.3 Parking, Merging, Roundabouts, and Highway Entries/Exits
7 See-Think-Do
7.1 See: Observation and Hazard Perception 7.2 Think: Assessing Risk and Choosing a Solution 7.3 Do: Speed, Steering, Space Margins, and Communication
8 Sharing the Road
8.1 Pedestrians, Cyclists, and Vulnerable Road Users 8.2 Large Vehicles, School/Transit Buses, and Emergency Vehicles 8.3 Trains, Horses, Construction Zones, and Other Motorcycles
9 Personal Strategies
9.1 Fitness to Ride: Fatigue, Health, Vision, and Distraction 9.2 Impairment: Alcohol, Drugs, and Medications 9.3 Passengers, Peer Pressure, and Aggression
10 Challenging Riding Conditions
10.1 Reduced Visibility: Fog, Rain, Glare, and Night Riding 10.2 Reduced Traction: Slippery Surfaces, Gravel, Railway Tracks, and Hydroplaning 10.3 Curves, Hills, Crosswinds, Turbulence, and Cargo
11 Emergency Strategies
11.1 Collision Avoidance: Braking, Swerving, and Accelerating 11.2 Mechanical Problems and Obstacles 11.3 At the Scene of a Crash
12 Licensing, Testing, and Learner Rules
12.1 The Knowledge Test, Vision/Medical Screening, and Motorcycle Skills Test 12.2 Learner Restrictions and Road Test Progression 12.3 Penalties, Training Schools, and Rider Responsibilities
4.1 Motorcycle Controls and Instruments
Key Takeaways Explain This Topic AI
The clutch lever is on the left handlebar and disengages engine power so you can shift gears; the front brake lever is on the right handlebar
The gearshift lever is operated by the left foot and the rear brake pedal by the right foot
The throttle is on the right handlebar and is spring-loaded — rolling it back toward you increases engine speed, releasing it closes the throttle
The fuel valve (petcock) controls fuel flow from the tank to the engine and must be turned to ON or RESERVE as needed on motorcycles that have one
The instrument panel includes the speedometer, tachometer, and indicator/warning lights such as the neutral, turn-signal, high-beam, and oil-pressure lights
Last updated: August 2026
Before you ride, you need to be able to find every control by feel — at speed you cannot afford to hunt for the horn or the turn-signal switch. ICBC's Learn to Ride Smart (Chapter 3) groups motorcycle controls by where they sit on the bike: the left handlebar , the right handlebar , the foot controls , and the instrument panel . This section walks through each group.
Left Handlebar Controls
The left handlebar carries the controls you use to manage engine power and signalling:
Clutch lever — The large lever in front of the left grip. Squeezing it disengages the engine from the transmission so you can shift gears smoothly and come to a stop without stalling. Release it progressively (the "friction zone") to move away from a stop.
High/low beam switch — Toggles the headlight between high and low beam. Use low beam in town and when meeting oncoming traffic; high beam is for dark open roads when no traffic is approaching.
Horn button — Usually a small button pressed with the left thumb. Use the horn to alert other road users who may not see you — a short tap, not a sustained blast.
Turn-signal switch — Slides left or right to activate the corresponding turn-signal lights. Motorcycle signals do not always cancel automatically, so re-apply the signal if it cancels early and always cancel it manually after the manoeuvre.
Choke or enrichener — On carbureted motorcycles, a lever or knob that enriches the fuel mixture for cold starting. Push it back in once the engine warms up; leaving it on wastes fuel and fouls plugs.
Headlight switch — On many motorcycles the headlight runs whenever the engine is on, but some models have an explicit ON/OFF switch on the left bar.
Right Handlebar Controls
The right handlebar carries the controls for speed and stopping:
Front brake lever — The large lever in front of the right grip. It operates the front brake, which provides most of your stopping power. Squeeze it smoothly — never grab it.
Throttle — The right grip itself. Roll it back (toward you) to increase engine speed; roll it forward (away from you) to decrease speed. The throttle is spring-loaded and returns to idle when you let go.
Engine cut-off switch (kill switch) — A red rocker or toggle above the throttle. Learn to Ride Smart lists it as a standard right-handlebar control, not an optional one. It stops the engine without reaching for the key — learn where it is so you can shut the engine down in an emergency.
Electric start button — Presses to engage the starter motor. Most modern bikes require the clutch lever to be pulled in and the side stand up before the starter will engage as a safety interlock.
Foot Controls
Gearshift lever — On the left side of the engine, operated by your left foot. A standard motorcycle gearbox uses a one-down, rest-up pattern: first gear is down, neutral is a half-step up from first, and higher gears are successive full lifts.
Rear brake pedal — On the right side, operated by your right foot. The rear brake is less powerful than the front but helps with stability and low-speed control.
Ignition, Fuel Valve, and Stands
Ignition switch — Usually on the steering column or right handlebar, it powers the electrical system and locks the steering when removed.
Fuel valve (petcock) — Found on motorcycles with a non-electronic fuel system. Positions are typically ON, OFF, and RESERVE. If the main supply runs low, switching to RESERVE uses the remaining fuel. Fuel-injected motorcycles usually have no manual petcock.
Kickstand / side stand — The left-side stand used for parking. The engine cut-off interlock prevents riding with the stand down on most bikes.
Centre stand — Some bikes have a centre stand for parking and maintenance; not all do.
Mirrors and Instrument Panel
Mirrors — Adjust them before you ride, trying to keep your own elbows and shoulders out of the rear view. ICBC tells you to look in your mirrors every few seconds, before you slow down or stop, and whenever you plan to change road position or direction — and to complete the whole observation cycle (12 seconds ahead, side to side, mirrors) every five to eight seconds.
Speedometer — Shows road speed, often in both km/h and mph; in B.C. focus on km/h.
Tachometer — Shows engine speed (RPM). Stay below the redline and shift to keep the engine in its usable range.
Indicator and warning lights — Include the neutral light, turn-signal indicator, high-beam indicator, oil-pressure warning, and on some bikes a temperature or check-engine light. Know what each one means before riding.
Controls Grouped by Location
- Location Controls
- Left handlebar Clutch lever, turn-signal switch, high/low beam switch, horn button, choke/enrichener
- Right handlebar Front brake lever, throttle, engine cut-off (kill) switch, electric start button
- Left foot Gearshift lever
- Right foot Rear brake pedal
- Steering column / bar Ignition switch
- Left side of tank or frame Fuel valve (petcock) on carbureted bikes
- Left side of frame Side (kick) stand
- Handlebar ends Mirrors
- Above the bars Instrument panel: speedometer, tachometer, indicator/warning lights
The single most important habit is muscle memory . Practise finding each control with the engine off, then again with the bike moving slowly in a safe area, until you never have to look down.