Study guide
5.3 Pavement Markings (Yellow/White Lines and Reserved Lanes)
British Columbia Class 6/8 Motorcycle Knowledge Test Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 About the BC Motorcycle Knowledge Test 1.2 Class 6L vs Class 8L Pathways and the Graduated Licensing Program
2 You in the Rider's Seat
2.1 Rider Responsibility and Fitness to Ride 2.2 Motorcycle Vulnerability, Visibility, and Risk Management
3 You and Your Motorcycle — Riding Gear
3.1 Approved Helmets and Eye/Face Protection 3.2 Protective Clothing, High-Visibility Gear, Gloves, and Footwear 3.3 Motorcycle Types, Fit, and Budgeting for Motorcycling
4 Knowing Your Motorcycle
4.1 Motorcycle Controls and Instruments 4.2 Riding Posture and the Pre-Trip Check 4.3 Routine Maintenance and Periodic Inspection
5 Signs, Signals and Road Markings
5.1 Traffic Signs (Regulatory, Warning, Construction, Railway, Information) 5.2 Traffic Signals and Lane Control Signals 5.3 Pavement Markings (Yellow/White Lines and Reserved Lanes)
6 Rules of the Road
6.1 Intersections and Right-of-Way 6.2 Lane Use, Turning, and Passing 6.3 Parking, Merging, Roundabouts, and Highway Entries/Exits
7 See-Think-Do
7.1 See: Observation and Hazard Perception 7.2 Think: Assessing Risk and Choosing a Solution 7.3 Do: Speed, Steering, Space Margins, and Communication
8 Sharing the Road
8.1 Pedestrians, Cyclists, and Vulnerable Road Users 8.2 Large Vehicles, School/Transit Buses, and Emergency Vehicles 8.3 Trains, Horses, Construction Zones, and Other Motorcycles
9 Personal Strategies
9.1 Fitness to Ride: Fatigue, Health, Vision, and Distraction 9.2 Impairment: Alcohol, Drugs, and Medications 9.3 Passengers, Peer Pressure, and Aggression
10 Challenging Riding Conditions
10.1 Reduced Visibility: Fog, Rain, Glare, and Night Riding 10.2 Reduced Traction: Slippery Surfaces, Gravel, Railway Tracks, and Hydroplaning 10.3 Curves, Hills, Crosswinds, Turbulence, and Cargo
11 Emergency Strategies
11.1 Collision Avoidance: Braking, Swerving, and Accelerating 11.2 Mechanical Problems and Obstacles 11.3 At the Scene of a Crash
12 Licensing, Testing, and Learner Rules
12.1 The Knowledge Test, Vision/Medical Screening, and Motorcycle Skills Test 12.2 Learner Restrictions and Road Test Progression 12.3 Penalties, Training Schools, and Rider Responsibilities
5.3 Pavement Markings (Yellow/White Lines and Reserved Lanes)
Key Takeaways Explain This Topic AI
Yellow lines separate opposing traffic: a broken yellow allows passing when safe, a single solid yellow allows passing with extra caution, a broken-beside-solid line allows passing only from the broken side, and a double solid yellow allows no passing
White lines separate same-direction lanes: a broken white line allows lane changes when safe, and a solid white line means do not change lanes
A diamond painted in a lane marks a reserved lane; motorcycles may use B.C. HOV lanes without meeting the occupancy minimum unless a sign prohibits them, but bus-only and bicycle lanes remain closed to riders
Stop lines, crosswalk markings, and bicycle-lane symbols tell a rider where to stop and which space is set aside for cyclists
Last updated: August 2026
Pavement markings are the road's silent signs. Once you know the colour and line-type code, you can read lane rules at a glance without taking your eyes off the road for more than a flicker — essential for the See-Think-Do scan. Learn to Ride Smart groups B.C. pavement markings into yellow centre lines, white lane lines, reserved-lane diamonds, crosswalks, stop lines, and bicycle lanes.
Yellow Lines — Opposing Traffic
Yellow lines separate traffic moving in opposite directions. The pattern tells you whether passing (crossing the line to overtake) is legal from your side.
Line pattern Meaning What you do
Broken (dashed) yellow Passing is allowed when safe You may cross to overtake after a mirror check and a shoulder check
Single solid yellow Passing is allowed with extra caution Under the Motor Vehicle Act you may cross a single solid line only to pass a vehicle you are overtaking, and only when it is clearly safe
Broken line beside a solid line Passing is allowed only from the side with the broken line If the broken half is on your side you may pass when safe; if the solid half is on your side you may not
- Double solid yellow No passing allowed Do not cross to overtake
- Double broken yellow The lane is reversible A lane control signal overhead tells you whether you may use it
Two-way left-turn lane (solid outer, broken inner) Shared centre lane for left turns from both directions Enter it only to turn left or to wait to turn left — never to travel or pass in
The two yellow-line rules riders get wrong
A single solid yellow line is not a no-passing line in B.C. ICBC's own wording is "passing is allowed with extra caution," and the Motor Vehicle Act permits crossing a single solid line when passing an overtaken vehicle. The line that bans passing outright is the double solid yellow .
The other trap is the combination line — solid on one side, broken on the other. The rule is symmetric: you may pass only if the broken half is on your side. If the solid half is nearest your motorcycle, passing is illegal even if the road looks clear.
Left turns are a separate question. The Motor Vehicle Act suspends the line rules when you are entering or leaving a highway — turning into or out of a driveway, alley, or side road — provided the movement can be made safely. That is why you can turn left across a double solid yellow into a driveway but cannot use it to overtake.
One small rule that appears on knowledge tests: it is illegal to ride over freshly painted, wet pavement markings.
On a motorcycle, passing on a broken yellow still demands a full See-Think-Do sequence: mirror check, shoulder check, signal, re-check, then move. The small profile of a bike means oncoming drivers underestimate your closing speed — never pass near the crest of a hill or where sight lines are short.
White Lines — Same-Direction Traffic
White lines separate lanes of traffic moving in the same direction.
White lines also mark crosswalks, stopping positions, and the right shoulders of highways.
- Line pattern Meaning What you do
- Broken white Lane changing is allowed when safe Signal, mirror-check, shoulder-check, and move
- Solid white Do not change lanes Hold your lane until the line becomes broken again
- Stop line (solid white across the lane) Where you must stop Stop before the line, not on or past it
ICBC's wording on a solid white line is direct — do not change lanes — so treat it as a rule, not a suggestion. Solid white lines appear where a lane change would be dangerous or would conflict with merging traffic: at intersections, on freeway entrance and exit ramps, and approaching crosswalks. For a rider, the practical habit is to set your lane position before the solid white begins, so you are never forced to move across it.
Reserved Lanes — Diamond Markings
A white diamond painted in a lane , usually with thick solid or broken boundary lines, marks a reserved lane. In B.C. these are most often high-occupancy vehicle (HOV) lanes on highways or transit-priority lanes on urban arterials. The sign mounted with the lane states which vehicles are allowed.
Motorcycles may use B.C. HOV lanes even when they do not meet the posted minimum number of occupants — a solo rider is allowed. The exception matters, though: a rider cannot use an HOV lane where a sign prohibits motorcycles, and a lane signed for a narrower group (for example "Buses Only" or a transit-priority lane) is not an HOV lane at all and is closed to you. Always read the sign before you commit to the lane.
A bicycle lane is a different animal again: it is for cyclists only, is marked with an outline of a bicycle and sometimes a diamond, and is closed to motorcycles.
Other markings
Turn arrows painted in a lane tell you what that lane may do — a left arrow means vehicles in the lane must turn left; a straight-and-left arrow means they may go straight or turn left.
A painted island (a hatched or striped area) is not drivable space. Keep to the right of it and do not ride on or over it.
Loading diagram...
Crosswalks and Stop Lines
A crosswalk is marked by two parallel white lines (or a wider zebra-stripe pattern) crossing the roadway at an intersection or mid-block. Pedestrians have right-of-way within the crosswalk.
A stop line is a single solid white line set back from the intersection. When you are required to stop — at a red light, a stop sign, or for a pedestrian — you must stop before the stop line, not on or past it. On a motorcycle, stopping squarely behind the line keeps you out of the crosswalk and out of the path of turning trucks that cut the corner.
If there is no painted stop line, stop:
- at the stop sign itself, or
- before entering the crosswalk, or
before entering the intersection, in that order of precedence.
Bicycle Lanes
A bicycle lane is a reserved lane for cyclists, usually marked by a white line (often solid) and a bicycle symbol painted on the pavement, sometimes with a green surface treatment. Motorcycles must not ride in or stop in a bicycle lane, even to pass queued traffic. A common crash scenario is a rider filtering forward along the right edge of a stopped lane and drifting into the bike lane; keep your lane position within the vehicle lane, not in the cyclist's space.
When turning right across a bicycle lane, shoulder-check for cyclists on your right — they may be approaching faster than they appear, and they have right-of-way within their lane. A motorcycle's small silhouette means a cyclist can also fail to see you, so make eye contact or wait for a clear gap before completing the turn.
Putting Markings Into Lane Position
Pavement markings tell you the legal lane options. Your job as a rider is to choose the safe lane position within the legal options, balancing visibility, space, and traction:
In a single lane, position yourself so the driver ahead can see you in their mirror and so you have an escape route to the side.
Near a yellow centre line, do not hug it — keep space for oncoming mirrors, debris, and the lateral movement of larger vehicles.
Approaching a solid white before a turn, set up your lane position early, because you may not change lanes once the solid white begins.
At a crosswalk, stop behind the stop line and leave the crosswalk clear for pedestrians.
Reading markings as part of the 12-second scan means you are never surprised by a no-pass zone, a reserved lane, or a crosswalk — you adjust before you reach them, which is exactly the habit the Class 6/8 knowledge test questions are checking for.