Study guide
5.2 Traffic Signals and Lane Control Signals
British Columbia Class 6/8 Motorcycle Knowledge Test Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 About the BC Motorcycle Knowledge Test 1.2 Class 6L vs Class 8L Pathways and the Graduated Licensing Program
2 You in the Rider's Seat
2.1 Rider Responsibility and Fitness to Ride 2.2 Motorcycle Vulnerability, Visibility, and Risk Management
3 You and Your Motorcycle — Riding Gear
3.1 Approved Helmets and Eye/Face Protection 3.2 Protective Clothing, High-Visibility Gear, Gloves, and Footwear 3.3 Motorcycle Types, Fit, and Budgeting for Motorcycling
4 Knowing Your Motorcycle
4.1 Motorcycle Controls and Instruments 4.2 Riding Posture and the Pre-Trip Check 4.3 Routine Maintenance and Periodic Inspection
5 Signs, Signals and Road Markings
5.1 Traffic Signs (Regulatory, Warning, Construction, Railway, Information) 5.2 Traffic Signals and Lane Control Signals 5.3 Pavement Markings (Yellow/White Lines and Reserved Lanes)
6 Rules of the Road
6.1 Intersections and Right-of-Way 6.2 Lane Use, Turning, and Passing 6.3 Parking, Merging, Roundabouts, and Highway Entries/Exits
7 See-Think-Do
7.1 See: Observation and Hazard Perception 7.2 Think: Assessing Risk and Choosing a Solution 7.3 Do: Speed, Steering, Space Margins, and Communication
8 Sharing the Road
8.1 Pedestrians, Cyclists, and Vulnerable Road Users 8.2 Large Vehicles, School/Transit Buses, and Emergency Vehicles 8.3 Trains, Horses, Construction Zones, and Other Motorcycles
9 Personal Strategies
9.1 Fitness to Ride: Fatigue, Health, Vision, and Distraction 9.2 Impairment: Alcohol, Drugs, and Medications 9.3 Passengers, Peer Pressure, and Aggression
10 Challenging Riding Conditions
10.1 Reduced Visibility: Fog, Rain, Glare, and Night Riding 10.2 Reduced Traction: Slippery Surfaces, Gravel, Railway Tracks, and Hydroplaning 10.3 Curves, Hills, Crosswinds, Turbulence, and Cargo
11 Emergency Strategies
11.1 Collision Avoidance: Braking, Swerving, and Accelerating 11.2 Mechanical Problems and Obstacles 11.3 At the Scene of a Crash
12 Licensing, Testing, and Learner Rules
12.1 The Knowledge Test, Vision/Medical Screening, and Motorcycle Skills Test 12.2 Learner Restrictions and Road Test Progression 12.3 Penalties, Training Schools, and Rider Responsibilities
5.2 Traffic Signals and Lane Control Signals
Key Takeaways Explain This Topic AI
A steady red means stop, but after a full stop you may turn right — or turn left onto a one-way street — unless a sign forbids it; a steady amber means slow down and stop unless you cannot stop safely in time
In British Columbia a flashing green ball means a pedestrian-controlled light, not an advance left turn — go only if the intersection is clear; a flashing red is a stop sign and a flashing amber means proceed with caution
Lane control signals use a green downward arrow (drive in this lane), a flashing yellow X (move out of this lane), and a red X (do not drive in this lane); if every lane shows flashing yellow, slow down and proceed with caution
Riders should wait for a stable green (or a dedicated turn signal) and position themselves where oncoming drivers can see the motorcycle before committing to a turn
Last updated: August 2026
Traffic signals are the most common intersection control in B.C. cities, and intersections are where 60 per cent of B.C. crashes happen. Learn to Ride Smart stresses that the signal tells you who has right-of-way , not that it is safe to go — a rider must always confirm cross traffic has actually stopped before entering on green.
Standard Traffic Lights
Signal What it means in B.C. What you do
Steady red Stop Stop at the stop line. After a full stop you may turn right, or turn left onto a one-way street , unless a sign forbids it
Steady amber (yellow) The red is about to appear Slow down and stop before the intersection unless you cannot safely stop in time
Steady green Continue if the intersection is clear Still yield to pedestrians and any traffic already in the intersection
- Flashing red Treated as a stop sign Come to a complete stop, then continue only when it is safe
- Flashing amber Caution Slow down and proceed with caution
Flashing green A pedestrian-controlled light Go only if the intersection is clear — a pedestrian can activate the red at any moment
The amber-light decision
The amber light is the one riders get wrong most often. The rule is stop if you can stop safely ; only proceed if stopping would be unsafe — for example, you are already too close to the stop line at the speed limit and a hard stop would risk a rear-end or a skid. On a motorcycle, "safely" also means checking your mirror before braking, because a driver behind you may be planning to run the amber. Cover the brake early so the brake light warns the driver behind you.
The flashing green light — a B.C.-specific trap
This is the single most misread signal on the B.C. knowledge test, because it means something different here than in some other provinces. In British Columbia a flashing green ball marks a pedestrian-controlled intersection : the light stays green for the through road until a pedestrian presses the button, at which point it changes. It is not an advance left-turn signal.
For a rider, the practical consequences are:
Approach a flashing green ready for it to change — do not accelerate into it.
Expect a pedestrian at the crosswalk, because a pedestrian is the only reason it will change.
Cross only when the intersection is clear; you do not get a protected turn out of it.
The signals that do give you a protected left turn are the arrow signals below.
Flashing Red vs. Flashing Amber
A flashing red is legally a stop sign: complete stop, yield, proceed when safe. You will see flashing red at a fully failed intersection (all directions flashing red — treat as a four-way stop) or at certain pedestrian crossings.
A flashing amber is a caution signal, not a stop. Slow down, scan for pedestrians and cross traffic, and proceed when it is safe. Flashing amber often appears late at night at intersections where the full signal has been switched to a caution mode.
Arrow Signals and Protected Turns
B.C. uses several arrow patterns. Knowing which one you are looking at prevents turning into oncoming traffic.
Green arrow — turn in the direction of the arrow. Oncoming traffic has a red, so the turn is protected, but you must still yield to pedestrians in the crosswalk.
Green arrow pointing straight up — no turn is permitted; go straight through only.
Flashing green arrow with a steady green light — you may turn in the direction of the arrow or proceed straight through.
Flashing green arrow with a steady red light — the left turn is allowed, but through traffic must stop for the red.
Amber (yellow) arrow — the advance left-turn signal is about to change. Slow down and stop before the intersection unless you cannot safely stop in time.
Transit priority signal — a steady white rectangular light . Only buses may go on this signal; other traffic, including motorcycles, must wait for the regular signal.
Motorcycle positioning while waiting
When you are first in line at a red waiting to turn left, position yourself so your motorcycle is visible to oncoming drivers and to the driver behind you. Learn to Ride Smart recommends keeping both hands on the bars, the bike in first gear, and your eyes scanning the full intersection — not locked on the signal head. When the green appears, wait for a stable green and confirm oncoming traffic has actually stopped before you commit to the turn; a premature launch into a left turn is one of the most common motorcycle fatality scenarios.
Pedestrian Signals
Pedestrian signals tell walkers when they may cross, and they give riders a preview of what the traffic light is about to do.
Walk / walking-person symbol — pedestrians may cross; expect foot traffic in the crosswalk and be ready to yield.
Flashing hand / orange countdown — pedestrians should not start crossing; those already in the crosswalk are finishing. For a rider, the countdown is a countdown to amber — a useful cue that the light is about to change.
Steady hand / raised hand — pedestrians must not cross; the traffic signal is about to turn green for vehicles (or has already).
Reading the pedestrian countdown lets you predict the amber before it appears, which helps you decide whether to stop or proceed smoothly instead of braking hard.
Lane Control Signals
Lane control signals are the overhead lights above individual lanes on highways, bridges, and reversible commuter lanes. They tell you whether a lane is open to traffic.
- Signal Meaning
- Steady green downward arrow Drive in this lane
- Flashing yellow X Move out of this lane and into a lane showing a green arrow
- Red X Do not drive in this lane
One extra rule catches riders out: if the lane control signals over all the lanes are flashing yellow X, you do not have a lane to move into — slow down and proceed with caution .
A red X over a lane means a collision, a stalled vehicle, or a scheduled closure is ahead. Riding into a red-X lane is an offence and a serious crash risk, especially on a motorcycle where you may not see the hazard until you are in the lane. On bridges and counterflow routes the lane direction reverses by time of day — always read the signal, never assume the lane direction from yesterday.
Waiting for a Stable Signal
A signal can change the moment you commit to it. The rider's habit is to treat a freshly changed green as a cue to scan the intersection, not to launch. Glance left, glance right, confirm cross traffic has stopped, then proceed. The same applies to a protected arrow: confirm the oncoming red is actually showing before you turn. This is the core See-Think-Do behaviour the knowledge test rewards: the signal gives right-of-way, but your eyes confirm safety.