Study guide
Analytical Tools: FMEA, Fault Tree, Fishbone, and Change Analysis
Associate Safety Professional ASP
Track your progress as you read
Finished sections get a check mark.
1 Orientation: BCSP ASP Eligibility, Fees, Exam Day, and Scoring
1.1 Credential Purpose and ASP Role 1.2 Eligibility: Education and Professional Safety Experience 1.3 Application, Approval, and the One-Year Exam Window 1.4 Fees, Budgeting, and Payment Decisions 1.5 Pearson Scheduling and Closed-Book Exam Day 1.6 Scoring, Retakes, and Recertification
2 Mathematical Calculations: Safety Math, Noise, Rigging, Flow, and Radiation
2.1 Safety Math Process and Unit Conversions 2.2 Storage Capacity, Area, Volume, and Secondary Containment 2.3 Rigging, Load Calculations, and Sling Angle Effects 2.4 Flow Rates, Ventilation, and Pumping Calculations 2.5 Trenching Slope Angle and Depth Ratio 2.6 Noise TWA, Dual Machinery, and NRR 2.7 Radiation Exposure, Dose, and Distance
3 Safety Management Systems, Risk Analysis, and Hierarchy of Controls
Management System Foundations Program Design, Accountability, and Objectives Hierarchy of Controls and Control Selection Hazard Identification and Job Analysis Risk Assessment and Risk Matrices Analytical Tools: FMEA, Fault Tree, Fishbone, and Change Analysis
4 Technical Safety Programs: Lockout, Electrical, Work at Height, Confined Space, and PSM
Hazard Communication, GHS, SDS, and PPE Integration Lockout, Hazardous Energy, and Machine Guarding Electrical Safety and Energized Work Controls Work at Height, Ladders, Scaffolds, and Fall Protection Excavation, Trenching, and Confined Space Entry Forklifts, Hoisting, Rigging, and Material Handling Process Safety, MOC, Contractors, and Fleet Safety
5 Ergonomics: Human Performance, MSDs, NIOSH Lifting, and Controls
5.1 Ergonomics Program Elements 5.2 MSDs and Ergonomic Risk Factors 5.3 Physical Demands and Manual Material Handling 5.4 Workstation Design and Computer Work 5.5 Hand Tools, Equipment, and Vibration 5.6 Controls, Human Performance, and Evaluation
6 Fire Prevention and Protection: Hot Work, Dust, Electrical, and Suppression
6.1 Fire Science and Fire Classes 6.2 Flammable and Combustible Materials, Storage, and Ventilation 6.3 Hot Work Permits and Fire Watch 6.4 Combustible Dust and Housekeeping 6.5 Electrical Hazards and Ignition Control 6.6 Detection, Suppression, Extinguishers, Signs, and Labels
7 Emergency Preparedness, Response, ICS, Business Continuity, and Violence Prevention
7.1 Emergency Response Plans and the Preparedness Cycle 7.2 Natural, Human-Caused, and Biological Emergency Scenarios 7.3 Evacuation, Shelter, Life Safety, and Accountability 7.4 Medical, First Aid, Communications, and Response Resources 7.5 Incident Command System and Emergency Coordination 7.6 Business Continuity, Security, Violence Prevention, and Lone Workers
8 Industrial Hygiene, Occupational Health, Exposure Limits, Toxicology, and Total Worker Health
8.1 Industrial Hygiene Programs and Exposure Assessment 8.2 Routes of Entry, Toxicology, Dose, and Exposure Limits 8.3 Chemical Hazards, Chemistry, and Hazard Communication 8.4 Physical Hazards, Hearing Conservation, Radiation, Heat, and Vibration 8.5 Respiratory Protection, Ventilation, PPE, and Control Verification 8.6 Occupational Health, Medical Surveillance, Biological Hazards, and Total Worker Health
9 Environmental Management, Waste, Air, Water, ISO 14001, and ESG
9.1 Environmental Aspects, Impacts, and Risk Prioritization 9.2 Water, Wastewater, Stormwater, and Drainage Controls 9.3 Air Emissions, Odors, Dust, and Control Devices 9.4 Land, Soil, Storage, Spill Prevention, and Response 9.5 Waste Classification, Labeling, Treatment, and Disposal 9.6 ISO 14001, Conservation Hierarchy, and ESG Integration
10 Training, Education, Communication, Culture, Competency, and Procedures
10.1 Learning Theory and Training Design 10.2 Needs and Gap Analysis, Baseline Competency, and Audience Targeting 10.3 Training Methods, Tools, and Jobsite Delivery 10.4 Training Effectiveness, Feedback, Records, and Improvement 10.5 Safety Culture, Human Risk Factors, and Behavior 10.6 Competent and Qualified Persons, Procedures, and Communication
11 Chapter 11: Legal, Contractor Management, Multi-Employer Risk Transfer, and Professional Limits
11.1 Legal Liability and Compliance Frameworks 11.2 Contractor Prequalification, Selection, and Onboarding 11.3 Multi-Employer Worksites and Coordination 11.4 Contract Terms, Risk Transfer, and Insurance Boundaries 11.5 Worker Impairment, Fitness for Duty, and Sensitive Response 11.6 Professional Limits, Records, and Documentation
12 Chapter 12: Integrated ASP Review, Timed Practice, Diagnostics, and Final Readiness
12.1 Blueprint Map and Final Study Priorities 12.2 Five-Hour Pacing and Question Triage 12.3 Calculation Triage and Error Control 12.4 Mixed-Domain Scenario Practice 12.5 Practice Diagnostics and Remediation Loop 12.6 Final Readiness, Exam Day, and Retake Boundaries
Analytical Tools: FMEA, Fault Tree, Fishbone, and Change Analysis
Key Takeaways Explain This Topic AI
FMEA is forward-looking: it asks how components, tasks, or steps can fail, the effects, and ranks them with a Risk Priority Number.
Fault tree analysis works backward from an undesired top event through AND/OR gates to combinations of causes and barriers.
Fishbone (Ishikawa) diagrams organize possible causes by category but never prove which cause is correct without evidence.
Change analysis compares what changed against what was expected — strongest after incidents or before modifications.
Last updated: June 2026
Choose the analysis tool that fits the question
Safety professionals use structured tools to reduce guessing, and the tool must match the decision. Some tools look forward to find failures before an event; some work backward from an event; some organize candidate causes for discussion; some compare a changed condition with the expected condition. ASP items frequently give a scenario and ask which tool is most appropriate — the cue words in the stem decide the answer.
FMEA — forward, component-level
Failure modes and effects analysis (FMEA) is forward-looking. A team reviews each process step, component, or task and asks how it can fail, what the effect would be, the cause, the existing controls, and the actions needed. FMEA ranks items with a Risk Priority Number (RPN) = Severity × Occurrence × Detection , where each factor is typically scored 1–10 (so the RPN ranges from 1 to 1000). The highest RPNs get attention first. FMEA fits design, procedure development, equipment selection, maintenance planning, and process change — anytime the question is "how could this fail before we run it?"
Fault tree analysis — backward, top-down logic
Fault tree analysis (FTA) starts with an undesired top event — explosion, fall from elevation, chemical release, or unexpected startup — and maps the combinations of failures that could produce it using Boolean AND/OR gates . An AND gate means several things must fail together; an OR gate means any one failure suffices. FTA reveals how barriers interact: a serious event may require that isolation was not performed AND verification was skipped AND another worker initiated startup. It can be quantified if failure probabilities are known.
Fishbone and change analysis
Fishbone (Ishikawa / cause-and-effect) diagrams organize possible causes into categories — commonly the 6 Ms : People (manpower), Methods, Machines, Materials, Measurement, and Environment (Mother Nature). Fishbones structure brainstorming during investigations, but they are not proof; each branch still needs evidence.
Change analysis compares the incident or new condition with the normal or expected baseline, asking what changed in people, equipment, materials, methods, environment, timing, workload, supervision, software, layout, production rate, maintenance, or contractors. It is most powerful when a familiar process suddenly produces an unexpected result.
Tool Direction Best use Caution
FMEA Forward, by step/component Anticipating failures before harm; RPN ranking Needs knowledgeable team and realistic ratings
Fault tree Backward from a top event Combinations of causes via AND/OR gates Misses causes if the top event is poorly defined
Fishbone Organizes candidate causes Brainstorming and investigation structure Does not prove causation by itself
Change analysis Compares changed vs. normal Incidents, modifications, process drift Requires an accurate baseline
Matching cue words to tools
A common error is picking a tool because it sounds sophisticated. Read the cue: "how could each component fail before startup" → FMEA; "what combinations of failures could lead to a catastrophic top event" → fault tree; "organize the many possible causes the team brainstormed" → fishbone; "it ran fine for years until something changed" → change analysis.
Worked example: a press that operated safely for three years suddenly double-cycles and injures an operator. Nothing in the written procedure changed. The strongest first tool is change analysis — it surfaces that a control-relay vendor was switched during the last PM, a change MOC never captured. A fishbone could then organize candidate causes, and an FMEA of the new relay could prevent recurrence.
These tools must lead to controls . Analysis without action is not risk reduction. Results should produce higher-level controls, procedure changes, training, maintenance changes, purchasing changes, alarms, interlocks, inspections, or management-system improvements — each assigned, tracked, verified, and reviewed for residual risk.
Finally, use evidence to avoid bias. Interviews, records, photographs, monitoring data, maintenance history, training records, inspection reports, and field observations confirm or reject suspected causes. Do not stop at the first explanation — especially one that blames the worker while ignoring design, scheduling, supervision, or system contributors.
Related tools the exam may name
The blueprint can reference several adjacent techniques you should recognize. Root cause analysis (RCA) is the broad goal — finding the underlying system causes rather than the immediate symptom — and the tools above are means to that end. The 5 Whys is a simple iterative questioning method that drills from a symptom toward a root cause; it is quick but can stop too early or follow a single line.
Hazard and operability study (HAZOP) is a structured process-industry technique that applies guide words (such as no, more, less, reverse) to process parameters to find deviations; it is forward-looking like FMEA but organized around process flow rather than components. Energy trace and barrier analysis examines each energy source and the barriers meant to separate it from people, identifying which barrier failed or was missing.
Bow-tie and combining methods
The bow-tie model joins the two directions visually: the left side is a fault-tree-style view of threats leading to a top event, and the right side is an event-tree-style view of consequences, with preventive barriers on the left and mitigative barriers on the right. It is valued because it shows, on one diagram, both why an event could occur and what limits the harm if it does.
In practice, experienced safety professionals combine tools. Worked example: after a chemical release, a team uses change analysis to spot what differed from normal, a fishbone to organize candidate causes across the 6 Ms, the 5 Whys to drill the most likely branch to its system root, and finally an FMEA of the redesigned procedure to prevent recurrence. No single tool proves causation alone; each narrows the search, and every conclusion must be backed by evidence and converted into tracked, verified corrective actions that reduce residual risk.