Study guide

Hazard Identification and Job Analysis

Associate Safety Professional ASP

Track your progress as you read

Finished sections get a check mark.

1 Orientation: BCSP ASP Eligibility, Fees, Exam Day, and Scoring

1.1 Credential Purpose and ASP Role 1.2 Eligibility: Education and Professional Safety Experience 1.3 Application, Approval, and the One-Year Exam Window 1.4 Fees, Budgeting, and Payment Decisions 1.5 Pearson Scheduling and Closed-Book Exam Day 1.6 Scoring, Retakes, and Recertification

2 Mathematical Calculations: Safety Math, Noise, Rigging, Flow, and Radiation

2.1 Safety Math Process and Unit Conversions 2.2 Storage Capacity, Area, Volume, and Secondary Containment 2.3 Rigging, Load Calculations, and Sling Angle Effects 2.4 Flow Rates, Ventilation, and Pumping Calculations 2.5 Trenching Slope Angle and Depth Ratio 2.6 Noise TWA, Dual Machinery, and NRR 2.7 Radiation Exposure, Dose, and Distance

3 Safety Management Systems, Risk Analysis, and Hierarchy of Controls

Management System Foundations Program Design, Accountability, and Objectives Hierarchy of Controls and Control Selection Hazard Identification and Job Analysis Risk Assessment and Risk Matrices Analytical Tools: FMEA, Fault Tree, Fishbone, and Change Analysis

4 Technical Safety Programs: Lockout, Electrical, Work at Height, Confined Space, and PSM

Hazard Communication, GHS, SDS, and PPE Integration Lockout, Hazardous Energy, and Machine Guarding Electrical Safety and Energized Work Controls Work at Height, Ladders, Scaffolds, and Fall Protection Excavation, Trenching, and Confined Space Entry Forklifts, Hoisting, Rigging, and Material Handling Process Safety, MOC, Contractors, and Fleet Safety

5 Ergonomics: Human Performance, MSDs, NIOSH Lifting, and Controls

5.1 Ergonomics Program Elements 5.2 MSDs and Ergonomic Risk Factors 5.3 Physical Demands and Manual Material Handling 5.4 Workstation Design and Computer Work 5.5 Hand Tools, Equipment, and Vibration 5.6 Controls, Human Performance, and Evaluation

6 Fire Prevention and Protection: Hot Work, Dust, Electrical, and Suppression

6.1 Fire Science and Fire Classes 6.2 Flammable and Combustible Materials, Storage, and Ventilation 6.3 Hot Work Permits and Fire Watch 6.4 Combustible Dust and Housekeeping 6.5 Electrical Hazards and Ignition Control 6.6 Detection, Suppression, Extinguishers, Signs, and Labels

7 Emergency Preparedness, Response, ICS, Business Continuity, and Violence Prevention

7.1 Emergency Response Plans and the Preparedness Cycle 7.2 Natural, Human-Caused, and Biological Emergency Scenarios 7.3 Evacuation, Shelter, Life Safety, and Accountability 7.4 Medical, First Aid, Communications, and Response Resources 7.5 Incident Command System and Emergency Coordination 7.6 Business Continuity, Security, Violence Prevention, and Lone Workers

8 Industrial Hygiene, Occupational Health, Exposure Limits, Toxicology, and Total Worker Health

8.1 Industrial Hygiene Programs and Exposure Assessment 8.2 Routes of Entry, Toxicology, Dose, and Exposure Limits 8.3 Chemical Hazards, Chemistry, and Hazard Communication 8.4 Physical Hazards, Hearing Conservation, Radiation, Heat, and Vibration 8.5 Respiratory Protection, Ventilation, PPE, and Control Verification 8.6 Occupational Health, Medical Surveillance, Biological Hazards, and Total Worker Health

9 Environmental Management, Waste, Air, Water, ISO 14001, and ESG

9.1 Environmental Aspects, Impacts, and Risk Prioritization 9.2 Water, Wastewater, Stormwater, and Drainage Controls 9.3 Air Emissions, Odors, Dust, and Control Devices 9.4 Land, Soil, Storage, Spill Prevention, and Response 9.5 Waste Classification, Labeling, Treatment, and Disposal 9.6 ISO 14001, Conservation Hierarchy, and ESG Integration

10 Training, Education, Communication, Culture, Competency, and Procedures

10.1 Learning Theory and Training Design 10.2 Needs and Gap Analysis, Baseline Competency, and Audience Targeting 10.3 Training Methods, Tools, and Jobsite Delivery 10.4 Training Effectiveness, Feedback, Records, and Improvement 10.5 Safety Culture, Human Risk Factors, and Behavior 10.6 Competent and Qualified Persons, Procedures, and Communication

11 Chapter 11: Legal, Contractor Management, Multi-Employer Risk Transfer, and Professional Limits

11.1 Legal Liability and Compliance Frameworks 11.2 Contractor Prequalification, Selection, and Onboarding 11.3 Multi-Employer Worksites and Coordination 11.4 Contract Terms, Risk Transfer, and Insurance Boundaries 11.5 Worker Impairment, Fitness for Duty, and Sensitive Response 11.6 Professional Limits, Records, and Documentation

12 Chapter 12: Integrated ASP Review, Timed Practice, Diagnostics, and Final Readiness

12.1 Blueprint Map and Final Study Priorities 12.2 Five-Hour Pacing and Question Triage 12.3 Calculation Triage and Error Control 12.4 Mixed-Domain Scenario Practice 12.5 Practice Diagnostics and Remediation Loop 12.6 Final Readiness, Exam Day, and Retake Boundaries

Hazard Identification and Job Analysis

Key Takeaways Explain This Topic AI

Hazard identification must cover routine, nonroutine, emergency, maintenance, and contractor work — not just incident reports.

A job hazard analysis breaks a task into steps, identifies hazards at each step, and selects controls before work begins.

Checklists, inspections, worker interviews, observations, incident reviews, and exposure data each reveal different hazard signals.

A useful hazard description names the harmful mechanism, who is exposed, and how controls will be verified.

Last updated: June 2026

Hazard identification starts before the event

A hazard is a source or situation with the potential to cause injury, illness, property damage, environmental harm, or other loss. Hazard identification is the disciplined search for those sources before people are harmed. It spans physical, chemical, biological, ergonomic, psychosocial, energy, environmental, and organizational contributors.

Do not limit the search to routine production. Many serious exposures occur during setup, cleaning, line clearing, maintenance, troubleshooting, startup, shutdown, contractor work, emergency response, and changes in equipment or materials. A workplace that looks controlled during normal operation can become far more hazardous when a guard is removed, a valve is opened, or an employee reaches into a jammed machine.

Job hazard analysis

A job hazard analysis (JHA) — also called a job safety analysis (JSA) — breaks a job into steps, identifies hazards for each step, evaluates exposure, and selects controls. OSHA's recommended method (Publication 3071) is a four-part loop: select the job, break it into steps, identify hazards at each step, and determine preventive measures. The strongest JHAs are built with the people who do the task and verified by observing actual work; a JHA copied from another site without field review misses layout, staffing, climate, communication, and maintenance differences.

  • Hazard-finding method Good for Limitation
  • Worker interview Informal workarounds, practical concerns Needs trust and follow-up observation
  • Field observation Actual task flow and exposure points May miss rare nonroutine steps
  • Checklist inspection Prompting review of known requirements Misses unusual hazards not on the list
  • Incident / near-miss review Failure patterns and weak controls Reacts to events that already occurred
  • Exposure / monitoring data Quantifies noise, air, heat agents Requires a correct sampling strategy
  • Procedure review Gaps between written and actual work Paper review alone is insufficient
  • Make steps and hazards specific

A JHA must not become a paperwork exercise. Each step should be specific enough to reveal hazards. "Clean tank" is too broad; useful steps include isolate equipment, verify zero energy, open the access point, test the atmosphere, ventilate, enter, remove residue, and exit — each with distinct hazards and controls.

The hazard description should name the harmful mechanism . Instead of "poor housekeeping," write "slip hazard from oil on the walking surface near the press." Instead of "chemical hazard," write "solvent vapor inhalation during open-container transfer." Specific hazards lead to specific controls — and to correct quiz answers, because vague distractors such as "employee was careless" never name a mechanism.

Risk thinking starts during identification

Risk thinking begins here. Ask who is exposed, how often, for how long, under what conditions, and with what severity if controls fail. Include employees, temporary workers, contractors, visitors, maintenance personnel, emergency responders, and nearby operations. Also ask whether existing controls are engineered, administrative, PPE-based, informal, missing, or defeated.

Worked example: a packaging line has never produced a recordable injury, but operators report clearing jams roughly 15 times per shift by reaching past a partially open guard while the conveyor still has stored energy. The low lagging metric is misleading — this is a high-energy, high-frequency nonroutine task. The correct ASP move is to analyze the jam-clearing task now, with worker input, and apply energy isolation and a guard redesign, rather than wait for an injury to "confirm" the hazard.

A practical JHA workflow:

Select the job based on risk, frequency, change, or incident history.

Involve workers and supervisors familiar with the task.

Break the job into clear, specific steps.

Identify hazards and exposure at each step.

Choose controls using the hierarchy of controls.

Communicate, train on, and verify the revised method.

Review after changes, incidents, or field feedback.

Common trap: distractors that jump straight to discipline, generic annual retraining, or PPE without first understanding the task. Worker input improves identification but never replaces observation, verification, or management responsibility.

Energy and exposure as organizing lenses

Two lenses sharpen hazard identification on the exam. The first is the energy concept : harm comes from an uncontrolled release of energy — kinetic, potential (gravity), electrical, chemical, thermal, radiation, mechanical, or pressure. Asking "what energy could reach a person here?" surfaces hazards a tidy walkthrough misses, especially stored energy in springs, capacitors, pressurized lines, or raised loads that lockout/tagout must address.

The second is occupational health exposure , where the question is not "could it strike a person" but "what dose accumulates over time." Health hazards such as noise, airborne contaminants, heat, and radiation require quantification against limits — for example the OSHA permissible exposure limits (PELs) or the ACGIH Threshold Limit Values (TLVs) — using sampling rather than visual inspection. A task can look clean yet produce an overexposure, so identification must include monitoring data, not just observation.

Proactive identification programs

Hazard identification is a continuous program, not a one-time event. Mature systems combine scheduled inspections, behavior-based safety observations , hazard-reporting cards, pre-task planning or "take-five" reviews, and management of change triggers. Each method catches a different signal: inspections catch condition hazards, observations catch act and exposure hazards, and reporting cards catch the worker knowledge that audits miss. Worked example: a site relies solely on a quarterly checklist inspection and is surprised by an ergonomic injury cluster in shipping.

The checklist never prompted ergonomic exposure; adding worker reporting and a task-level JHA on the repetitive lifting station would have surfaced the awkward-posture, high-frequency hazard long before the strain claims appeared. The takeaway: layer multiple methods, weight them toward proactive and nonroutine work, and feed findings into risk assessment rather than filing them.