Study guide
Hierarchy of Controls and Control Selection
Associate Safety Professional ASP
Track your progress as you read
Finished sections get a check mark.
1 Orientation: BCSP ASP Eligibility, Fees, Exam Day, and Scoring
1.1 Credential Purpose and ASP Role 1.2 Eligibility: Education and Professional Safety Experience 1.3 Application, Approval, and the One-Year Exam Window 1.4 Fees, Budgeting, and Payment Decisions 1.5 Pearson Scheduling and Closed-Book Exam Day 1.6 Scoring, Retakes, and Recertification
2 Mathematical Calculations: Safety Math, Noise, Rigging, Flow, and Radiation
2.1 Safety Math Process and Unit Conversions 2.2 Storage Capacity, Area, Volume, and Secondary Containment 2.3 Rigging, Load Calculations, and Sling Angle Effects 2.4 Flow Rates, Ventilation, and Pumping Calculations 2.5 Trenching Slope Angle and Depth Ratio 2.6 Noise TWA, Dual Machinery, and NRR 2.7 Radiation Exposure, Dose, and Distance
3 Safety Management Systems, Risk Analysis, and Hierarchy of Controls
Management System Foundations Program Design, Accountability, and Objectives Hierarchy of Controls and Control Selection Hazard Identification and Job Analysis Risk Assessment and Risk Matrices Analytical Tools: FMEA, Fault Tree, Fishbone, and Change Analysis
4 Technical Safety Programs: Lockout, Electrical, Work at Height, Confined Space, and PSM
Hazard Communication, GHS, SDS, and PPE Integration Lockout, Hazardous Energy, and Machine Guarding Electrical Safety and Energized Work Controls Work at Height, Ladders, Scaffolds, and Fall Protection Excavation, Trenching, and Confined Space Entry Forklifts, Hoisting, Rigging, and Material Handling Process Safety, MOC, Contractors, and Fleet Safety
5 Ergonomics: Human Performance, MSDs, NIOSH Lifting, and Controls
5.1 Ergonomics Program Elements 5.2 MSDs and Ergonomic Risk Factors 5.3 Physical Demands and Manual Material Handling 5.4 Workstation Design and Computer Work 5.5 Hand Tools, Equipment, and Vibration 5.6 Controls, Human Performance, and Evaluation
6 Fire Prevention and Protection: Hot Work, Dust, Electrical, and Suppression
6.1 Fire Science and Fire Classes 6.2 Flammable and Combustible Materials, Storage, and Ventilation 6.3 Hot Work Permits and Fire Watch 6.4 Combustible Dust and Housekeeping 6.5 Electrical Hazards and Ignition Control 6.6 Detection, Suppression, Extinguishers, Signs, and Labels
7 Emergency Preparedness, Response, ICS, Business Continuity, and Violence Prevention
7.1 Emergency Response Plans and the Preparedness Cycle 7.2 Natural, Human-Caused, and Biological Emergency Scenarios 7.3 Evacuation, Shelter, Life Safety, and Accountability 7.4 Medical, First Aid, Communications, and Response Resources 7.5 Incident Command System and Emergency Coordination 7.6 Business Continuity, Security, Violence Prevention, and Lone Workers
8 Industrial Hygiene, Occupational Health, Exposure Limits, Toxicology, and Total Worker Health
8.1 Industrial Hygiene Programs and Exposure Assessment 8.2 Routes of Entry, Toxicology, Dose, and Exposure Limits 8.3 Chemical Hazards, Chemistry, and Hazard Communication 8.4 Physical Hazards, Hearing Conservation, Radiation, Heat, and Vibration 8.5 Respiratory Protection, Ventilation, PPE, and Control Verification 8.6 Occupational Health, Medical Surveillance, Biological Hazards, and Total Worker Health
9 Environmental Management, Waste, Air, Water, ISO 14001, and ESG
9.1 Environmental Aspects, Impacts, and Risk Prioritization 9.2 Water, Wastewater, Stormwater, and Drainage Controls 9.3 Air Emissions, Odors, Dust, and Control Devices 9.4 Land, Soil, Storage, Spill Prevention, and Response 9.5 Waste Classification, Labeling, Treatment, and Disposal 9.6 ISO 14001, Conservation Hierarchy, and ESG Integration
10 Training, Education, Communication, Culture, Competency, and Procedures
10.1 Learning Theory and Training Design 10.2 Needs and Gap Analysis, Baseline Competency, and Audience Targeting 10.3 Training Methods, Tools, and Jobsite Delivery 10.4 Training Effectiveness, Feedback, Records, and Improvement 10.5 Safety Culture, Human Risk Factors, and Behavior 10.6 Competent and Qualified Persons, Procedures, and Communication
11 Chapter 11: Legal, Contractor Management, Multi-Employer Risk Transfer, and Professional Limits
11.1 Legal Liability and Compliance Frameworks 11.2 Contractor Prequalification, Selection, and Onboarding 11.3 Multi-Employer Worksites and Coordination 11.4 Contract Terms, Risk Transfer, and Insurance Boundaries 11.5 Worker Impairment, Fitness for Duty, and Sensitive Response 11.6 Professional Limits, Records, and Documentation
12 Chapter 12: Integrated ASP Review, Timed Practice, Diagnostics, and Final Readiness
12.1 Blueprint Map and Final Study Priorities 12.2 Five-Hour Pacing and Question Triage 12.3 Calculation Triage and Error Control 12.4 Mixed-Domain Scenario Practice 12.5 Practice Diagnostics and Remediation Loop 12.6 Final Readiness, Exam Day, and Retake Boundaries
Hierarchy of Controls and Control Selection
Key Takeaways Explain This Topic AI
The NIOSH hierarchy ranks five control strategies by reliability: elimination, substitution, engineering, administrative, PPE.
Elimination, substitution, and engineering controls are stronger because they reduce risk without depending on perfect human behavior.
Administrative controls and PPE remain necessary but require ongoing performance, supervision, fit, and maintenance.
ISO 45001 Clause 8.1.2 requires controls to be applied in hierarchy order, and complete strategies usually layer multiple controls.
Last updated: June 2026
Control selection follows risk-reduction logic
The hierarchy of controls is a ranked sequence of ways to reduce risk, codified by the National Institute for Occupational Safety and Health (NIOSH) and embedded in ANSI/ASSP Z10 and ISO 45001 Clause 8.1.2 . It is not just a list to memorize — it encodes a prevention principle: controls that remove the hazard or physically separate people from it are more reliable than controls that depend on attention, memory, or perfect behavior during every exposure.
The five levels, most to least effective:
Elimination — physically remove the hazard or the task entirely.
Substitution — replace the hazard with a less hazardous material, process, tool, or energy source.
Engineering controls — isolate people from the hazard by design (guards, ventilation, enclosure, interlocks).
Administrative controls — change how people work (procedures, permits, rotation, signage, training, scheduling).
Personal protective equipment (PPE) — a barrier worn on the worker (gloves, respirator, hearing protection, face shield).
- Control level Example Reliability concern
- Elimination Redesign material flow to remove a manual lift Highest — the task truly disappears
Substitution Swap a solvent for a water-based product; use a quieter tool Confirm no new hazards are introduced
- Engineering Guard a pinch point; ventilate a contaminant source Requires design, maintenance, verification
- Administrative Permit, rotation, procedure, sign, training Depends on consistent human performance
- PPE Gloves, respirator, hearing protection Requires selection, fit, use, storage, replacement
- Why the top three win
Elimination, substitution, and engineering controls reduce risk without significant human interaction , so their reliability does not erode shift to shift. Administrative controls and PPE are the lowest two tiers precisely because they require a worker to do the right thing every time. NIOSH groups the first three as inherently more protective for this reason.
ASP items frequently test whether you jump too quickly to training or PPE. Training is important, but it does not remove a rotating shaft, lower airborne concentration, or eliminate a fall exposure. PPE can be required, but it is the last line of defense . The stronger answer is usually to redesign, guard, enclose, ventilate, automate, or substitute at the source.
Checking for new hazards and layering
Control selection requires checking for introduced hazards . A substitution can cut toxicity but raise flammability (a lower flash point). A machine enclosure can trap heat or block maintenance access. Automation can introduce stored energy and troubleshooting exposure. Job rotation can lower individual dose while increasing the number of people exposed.
Layered controls are normal. A confined-space task may require eliminating entry where possible, isolation and lockout, ventilation, atmospheric testing, an entry permit, an attendant, rescue planning, communication, and PPE — all at once. The hierarchy does not say PPE is never used; it says PPE should not be the only answer when higher-level controls are feasible.
Worked example: workers are overexposed to noise at 92 dBA on an 8-hour shift, above the OSHA 90 dBA permissible exposure limit (PEL). Issuing earplugs (PPE) is the reflexive answer and the weakest tier. Stronger options follow the hierarchy: substitute quieter equipment, add engineering controls such as enclosures or damping, then use administrative limits on exposure time, and only then rely on hearing protection for residual exposure — always reassessing the residual dose.
Exam workflow
If the task can be removed, consider elimination .
If the hazard can be made less hazardous, consider substitution .
If exposure can be physically prevented or reduced, use engineering controls .
If work must still occur, add procedures, scheduling, permits, supervision, and training.
Select PPE for remaining exposure and verify suitability and fit.
Reassess residual risk after controls are installed, including during cleaning, maintenance, and abnormal conditions.
Feasibility, effectiveness, and the prevention-through-design link
Two feasibility tests appear in exam reasoning. Engineering feasibility asks whether a control can technically be built and operated; economic feasibility asks whether the cost is reasonable relative to the risk reduced. The hierarchy is a preference order , not a rigid mandate — but ISO 45001 Clause 8.1.2 requires that lower-tier controls be justified, meaning you should document why a higher tier was not used. The exam penalizes answers that leap to PPE "because it is cheaper" without showing that elimination, substitution, or engineering were infeasible.
Prevention through Design (PtD) , a NIOSH national initiative, applies the hierarchy at the earliest possible stage — in the design of facilities, equipment, processes, and work — when elimination and substitution are cheapest and most effective. The cost of changing a control rises sharply as a project moves from concept to construction to operation, so the highest-leverage controls are chosen before steel is set, not after an injury.
PPE as a managed system, never a single act
When PPE is required, it must be administered as a program, not handed out once. A defensible PPE program includes a hazard assessment to select the right equipment, proper fit (for respirators, a documented fit test under the OSHA respiratory protection standard, 29 CFR 1910.134), training on use and limitations, inspection, cleaning, storage, and replacement. Worked example: workers wear N95 respirators against a vapor, but vapors are not filtered by particulate respirators — the wrong PPE class was selected, so residual risk is essentially unchanged.
The lesson the exam tests: PPE only reduces risk if the right device is correctly selected, fitted, used, and maintained, which is exactly why it sits at the bottom of the hierarchy.