Study guide

Forklifts, Hoisting, Rigging, and Material Handling

Associate Safety Professional ASP

Track your progress as you read

Finished sections get a check mark.

1 Orientation: BCSP ASP Eligibility, Fees, Exam Day, and Scoring

1.1 Credential Purpose and ASP Role 1.2 Eligibility: Education and Professional Safety Experience 1.3 Application, Approval, and the One-Year Exam Window 1.4 Fees, Budgeting, and Payment Decisions 1.5 Pearson Scheduling and Closed-Book Exam Day 1.6 Scoring, Retakes, and Recertification

2 Mathematical Calculations: Safety Math, Noise, Rigging, Flow, and Radiation

2.1 Safety Math Process and Unit Conversions 2.2 Storage Capacity, Area, Volume, and Secondary Containment 2.3 Rigging, Load Calculations, and Sling Angle Effects 2.4 Flow Rates, Ventilation, and Pumping Calculations 2.5 Trenching Slope Angle and Depth Ratio 2.6 Noise TWA, Dual Machinery, and NRR 2.7 Radiation Exposure, Dose, and Distance

3 Safety Management Systems, Risk Analysis, and Hierarchy of Controls

Management System Foundations Program Design, Accountability, and Objectives Hierarchy of Controls and Control Selection Hazard Identification and Job Analysis Risk Assessment and Risk Matrices Analytical Tools: FMEA, Fault Tree, Fishbone, and Change Analysis

4 Technical Safety Programs: Lockout, Electrical, Work at Height, Confined Space, and PSM

Hazard Communication, GHS, SDS, and PPE Integration Lockout, Hazardous Energy, and Machine Guarding Electrical Safety and Energized Work Controls Work at Height, Ladders, Scaffolds, and Fall Protection Excavation, Trenching, and Confined Space Entry Forklifts, Hoisting, Rigging, and Material Handling Process Safety, MOC, Contractors, and Fleet Safety

5 Ergonomics: Human Performance, MSDs, NIOSH Lifting, and Controls

5.1 Ergonomics Program Elements 5.2 MSDs and Ergonomic Risk Factors 5.3 Physical Demands and Manual Material Handling 5.4 Workstation Design and Computer Work 5.5 Hand Tools, Equipment, and Vibration 5.6 Controls, Human Performance, and Evaluation

6 Fire Prevention and Protection: Hot Work, Dust, Electrical, and Suppression

6.1 Fire Science and Fire Classes 6.2 Flammable and Combustible Materials, Storage, and Ventilation 6.3 Hot Work Permits and Fire Watch 6.4 Combustible Dust and Housekeeping 6.5 Electrical Hazards and Ignition Control 6.6 Detection, Suppression, Extinguishers, Signs, and Labels

7 Emergency Preparedness, Response, ICS, Business Continuity, and Violence Prevention

7.1 Emergency Response Plans and the Preparedness Cycle 7.2 Natural, Human-Caused, and Biological Emergency Scenarios 7.3 Evacuation, Shelter, Life Safety, and Accountability 7.4 Medical, First Aid, Communications, and Response Resources 7.5 Incident Command System and Emergency Coordination 7.6 Business Continuity, Security, Violence Prevention, and Lone Workers

8 Industrial Hygiene, Occupational Health, Exposure Limits, Toxicology, and Total Worker Health

8.1 Industrial Hygiene Programs and Exposure Assessment 8.2 Routes of Entry, Toxicology, Dose, and Exposure Limits 8.3 Chemical Hazards, Chemistry, and Hazard Communication 8.4 Physical Hazards, Hearing Conservation, Radiation, Heat, and Vibration 8.5 Respiratory Protection, Ventilation, PPE, and Control Verification 8.6 Occupational Health, Medical Surveillance, Biological Hazards, and Total Worker Health

9 Environmental Management, Waste, Air, Water, ISO 14001, and ESG

9.1 Environmental Aspects, Impacts, and Risk Prioritization 9.2 Water, Wastewater, Stormwater, and Drainage Controls 9.3 Air Emissions, Odors, Dust, and Control Devices 9.4 Land, Soil, Storage, Spill Prevention, and Response 9.5 Waste Classification, Labeling, Treatment, and Disposal 9.6 ISO 14001, Conservation Hierarchy, and ESG Integration

10 Training, Education, Communication, Culture, Competency, and Procedures

10.1 Learning Theory and Training Design 10.2 Needs and Gap Analysis, Baseline Competency, and Audience Targeting 10.3 Training Methods, Tools, and Jobsite Delivery 10.4 Training Effectiveness, Feedback, Records, and Improvement 10.5 Safety Culture, Human Risk Factors, and Behavior 10.6 Competent and Qualified Persons, Procedures, and Communication

11 Chapter 11: Legal, Contractor Management, Multi-Employer Risk Transfer, and Professional Limits

11.1 Legal Liability and Compliance Frameworks 11.2 Contractor Prequalification, Selection, and Onboarding 11.3 Multi-Employer Worksites and Coordination 11.4 Contract Terms, Risk Transfer, and Insurance Boundaries 11.5 Worker Impairment, Fitness for Duty, and Sensitive Response 11.6 Professional Limits, Records, and Documentation

12 Chapter 12: Integrated ASP Review, Timed Practice, Diagnostics, and Final Readiness

12.1 Blueprint Map and Final Study Priorities 12.2 Five-Hour Pacing and Question Triage 12.3 Calculation Triage and Error Control 12.4 Mixed-Domain Scenario Practice 12.5 Practice Diagnostics and Remediation Loop 12.6 Final Readiness, Exam Day, and Retake Boundaries

Forklifts, Hoisting, Rigging, and Material Handling

Key Takeaways Explain This Topic AI

OSHA 1910.178 requires powered industrial truck operators to be trained, evaluated, and re-evaluated at least every three years.

Forklift stability depends on keeping the combined load and truck center of gravity inside the stability triangle.

Sling tension rises sharply as the angle to horizontal decreases; a 30-degree sling angle doubles tension versus a vertical lift.

Workers must never stand or pass under a suspended load, and exclusion zones are required for overhead lifts.

Last updated: June 2026

Moving materials changes the hazard picture

Forklifts, cranes, hoists, slings, carts, conveyors, and fleet vehicles expose people to struck-by , caught-between , crushed-by , tip-over, dropped-load, visibility, and stability hazards. A sound material-handling program controls operator competence, equipment inspection, load planning, traffic routes, pedestrian separation, communication, and incident review.

Forklift (powered industrial truck) safety under OSHA 1910.178 is more than an operator issue. Operators must be trained, evaluated on the specific truck type and workplace, and re-evaluated at least every three years or after an incident or near miss. The site layout, aisle width, floor condition, blind corners, dock condition, rack stability, lighting, and pedestrian crossings all shape risk. Stability is governed by the stability triangle formed by the two front wheels and the center of the steer axle: as long as the combined center of gravity of the truck and load stays inside that triangle, the truck stays upright.

Raising a load or adding an attachment shifts the center of gravity and lowers rated capacity, which appears on the data plate .

  • Material handling hazard Control focus
  • Forklift-pedestrian interaction Physical separation, marked routes, mirrors at blind corners, speed limits
  • Unstable or overweight load Data-plate capacity, load center, securing, tilt-back travel position
  • Dock edge / trailer creep Wheel chocks or restraints, dock plates, communication
  • Overhead lift Lift plan, rigging inspection, tag lines, exclusion zone
  • Poor visibility over a load Travel in reverse, spotters, or route change
  • Battery charging / LPG fueling Ventilation, no ignition, eyewash, PPE for acid

Hoisting and rigging require a distinct skill set. The team must know the load weight , center of gravity , attachment points, sling and hardware rated capacity, hitch type, sharp edges (use softeners), and the load path. Critically, sling tension grows as the sling angle to horizontal decreases. At a 60-degree angle the load factor is about 1.155; at 45 degrees about 1.414; and at 30 degrees the tension in each leg is double the vertical share .

Worked example: a 2,000 lb load on a two-leg bridle splits to 1,000 lb per leg only when the legs are vertical; at 30 degrees each leg sees roughly 2,000 lb, which can overload a sling rated for the static weight. Never stand or pass under a suspended load, and establish an exclusion zone.

Rigging inspection is mandatory before use. Remove from service any sling with broken wires beyond the allowable count, severe wear, distortion, heat or chemical damage, or a missing capacity tag. Distorted, cracked, or stretched hooks (throat opening increased beyond about 15%, or twist beyond 10 degrees) must be discarded. The program should define who may rig, who may signal, and when a more formal critical lift plan is required - generally as load value, complexity, environment, and consequence increase.

Manual handling completes the picture. Awkward reaches, heavy loads, twisting, and repetition create ergonomic risk; the NIOSH lifting equation can quantify a recommended weight limit. Mechanical aids (carts, hoists, vacuum lifters) reduce force but only if available, maintained, and unobstructed.

Forklift classes, tip-over response, and the load moment

Powered industrial trucks fall into seven OSHA/ASME classes, and matching the truck to the environment is a tested concept: internal-combustion trucks emit carbon monoxide and are unsuitable indoors without ventilation, while electric trucks suit enclosed spaces but require ventilated battery charging because charging releases flammable hydrogen. Load moment explains tip-over: capacity is rated at a standard load center , usually 24 inches from the fork face.

A load whose center of gravity sits farther out, or that is raised high, increases the forward moment and can exceed the data-plate capacity even though the weight is unchanged.

  • Tip-over situation Correct operator response
  • Lateral tip-over (truck rolling) Stay in the seat, brace, lean away from the fall; do not jump
  • Traveling on a ramp with a load Drive with the load pointed uphill
  • Heavy load raised high Lower before traveling; travel with mast tilted back
  • Approaching a dock edge Chock trailer wheels; verify dock plate

The counterintuitive but exam-correct rule for a tipping sit-down forklift is to stay belted in the seat and lean away - jumping puts the operator under the overhead guard. Seat belts and the operator restraint exist precisely for this.

Crane and hoist work adds load-chart and ground-condition concerns: outriggers must be fully extended on firm cribbing, the rated capacity drops as boom radius increases, and a qualified signal person uses standard hand signals. A tag line controls load rotation without putting a worker under the load. As with rigging, the exam rewards stopping to verify weight, path, and clearances rather than "lifting carefully."

Material handling program checks include:

Operators and riggers are trained and currently evaluated for their equipment.

The truck class matches the environment (ventilation, fuel, atmosphere).

Equipment is inspected and any defect affecting safe operation removes it from service.

Load weight, center of gravity, route, and landing area are known before the move.

Pedestrians are separated by barriers, routes, or controls.

Exclusion zones and tag lines control overhead loads.

Near misses and rack/dock damage trigger review before a serious injury occurs.