Study guide

Emergency Action Plans, Site Mitigation, and Evacuation

BCSP CHST Construction Health and Safety Technician Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: CHST Exam Orientation and Official Source Control

Official Sources and Credential Purpose Eligibility, Application, Fees, and Character Review Exam Format, Scoring, Beta Questions, and Blueprint Pearson VUE Scheduling, Test Day, Results, and Retakes Blueprint-Based Study Plan and Readiness

2 Chapter 2: Hazard and Risk Identification Methods, JHA, and Controls

Hierarchy of Controls and Construction Risk Logic Job Hazard Analysis and Pre-Task Planning Risk Ranking, Severity, Frequency, and Corrective Action Safety Through Design and Construction Means and Methods PPE Selection, Limitations, and Basic Monitoring Instruments Multi-Trade Coordination, Simultaneous Operations, and Interface Risk Field Observation, Documentation, and Control Verification

3 Chapter 3: High-Hazard Construction Operations I - Fall, Electrical, Excavation, Confined Space, Hot Work, Tools, and Concrete

Working at Heights: Ladders, Scaffolds, and Leading Edge Exposures Fall Protection: Arrest, Restraint, and Rescue Planning Excavation and Trenching: Soil, Protection, and Access/Egress Electrical Hazards: Temporary Power, GFCI, and LOTO Awareness Confined Space Recognition, Atmospheric Testing, and Entry Controls Hot Work: Fire Watch, Combustibles, and Permit Controls Hand and Power Tools, Powder-Actuated Tools, and Concrete Work

4 Chapter 4: High-Hazard Construction Operations II - Struck-By, Equipment, Hoisting, Rigging, Cranes, Material Handling, and Storage

Struck-By, Caught-Between, and Line-of-Fire Controls Mechanized Equipment, Mobile Equipment, and Traffic Control Hoisting, Rigging, Sling Inspection, and Load Control Crane Operations, Critical Lifts, Signaling, and Exclusion Zones Material Handling, Storage, Stacking, and Housekeeping Concrete Placement, Formwork, Rebar, and Impalement Controls Simultaneous Operations, Sequencing, and Stop-Work Decisions

5 Chapter 5: Construction Health, Environmental, Chemical, and Ergonomic Exposure Controls

Silica, Asbestos, Lead, Heavy Metals, and Dust Controls Noise, Vibration, Radiation, and Impact Exposure Control Chemical Exposure, GHS, SDS, and HazCom Field Use Heat, Cold, Extreme Climate, and Biological Hazard Controls Ergonomics, Manual Material Handling, and Work Practice Design Exposure Monitoring, PPE Limitations, and Medical Referral Triggers

6 Chapter 6: Emergency Preparedness, Incident Investigation, and Response

Emergency Action Plans, Site Mitigation, and Evacuation Fire Protection, Prevention, Hot Work, and Alarm Response Environmental Contamination, Spill Response, and Notifications Incident Command, Crisis Management, and Emergency Equipment First Aid, Medical Needs, Bloodborne Pathogens, and Universal Precautions Incident Investigation, Near Misses, Root Cause, and Corrective Action Drills, After-Action Reviews, and Return to Operations

7 Chapter 7: Safety Program Development, Implementation, and Sustainment

Site-Specific Safety Plans and Relevant Program Selection Applying Standards, Regulatory Authority, and Role Boundaries Inspections, Audits, Observations, and Corrective Action Tracking Equipment Manuals, Manufacturer Directives, and Field Compliance Risk Management, Data Gathering, Recordkeeping, and Document Control Incident Causation, Post-Incident Reporting, and Follow-Up Trends, Leading Indicators, and Program Sustainment

8 Chapter 8: Leadership, Communication, Training, and Total Worker Health

Safety Leadership, Credibility, and Field Influence Communication Strategy, Crew Briefings, and Conflict Management Training Needs, Task Analysis, and Adult Learning Delivery Toolbox Talks, Competency Verification, and Documentation Consulting Manufacturers, Suppliers, and Subject Matter Experts Confidentiality, Ethics, Document Control, and Current Information Total Worker Health, At-Risk Behavior, and Risk Reduction Activities

9 Chapter 9: Mixed CHST Construction Case Labs

Fall Protection, Scaffold, and Rescue Case Lab Excavation, Confined Space, and Atmospheric Hazard Case Lab Crane, Rigging, Equipment, and Struck-By Case Lab Hot Work, Fire, and HazCom Case Lab Silica, Noise, Heat, and Health Exposure Case Lab Incident Investigation, Program Failure, and Corrective Action Case Lab Superintendent Meeting, Training, and Stop-Work Case Lab

10 Chapter 10: Standards, References, Ethics, and Field Application

OSHA 1926 Navigation and Construction Standard Application Competent Person, Qualified Person, and Authority Boundaries Consensus Standards, Manufacturer Instructions, and Equipment Manuals BCSP Code of Ethics, Confidentiality, and Professional Conduct Exam-Style Reference Use and Best Answer Strategy

11 Chapter 11: Final Review, High-Yield Tables, and CHST Exam-Day Readiness

Blueprint Quick Reference and Domain Triage High-Yield Construction Hazard Control Tables Emergency Program Leadership and Documentation Review Final Week Practice Plan, Error Log, and Pacing Final 48 Hours, Pearson VUE Test Day, and Retake Planning

Emergency Action Plans, Site Mitigation, and Evacuation

Key Takeaways Explain This Topic AI

An OSHA emergency action plan (29 CFR 1926.35 / 1910.38) must be written when required, kept on site, and cover alarms, evacuation, accountability, and rescue limits.

Mitigation reduces likelihood or severity before an emergency by controlling fuel loads, access, egress routes, and alarm readiness.

Evacuation depends on accountability, accessible exits, trained wardens, and explicit criteria distinguishing evacuation from shelter-in-place.

A Construction Health and Safety Technician must recognize when site response is inadequate and public emergency services must be called.

Last updated: June 2026

  • Emergency Action Plans, Site Mitigation, and Evacuation
  • What the EAP Must Do

An emergency action plan (EAP) turns foreseeable jobsite emergencies into assigned actions. OSHA addresses it in 29 CFR 1926.35 for construction (which references the general-industry rule 1910.38 ). The plan must be written and kept on site when an employer has more than 10 employees; with 10 or fewer, the plan may be communicated orally. For the Construction Health and Safety Technician (CHST) exam, the issue is not whether a binder exists — it is whether the plan fits the site and workers can use it under stress.

A compliant EAP states procedures for reporting emergencies, evacuation including types of evacuation and exit-route assignments, procedures for employees who remain to operate critical operations before they evacuate, accountability after evacuation, rescue and medical duties, and the names or titles of contacts for more information. A CHST should confirm those elements plus alarms, shutdown duties, and coverage of subcontractors, visitors, and deliveries.

Mitigation Before the Event

Mitigation reduces the chance or severity of an emergency before it occurs. Examples include housekeeping, temporary-electrical inspections, hot-work controls, securing compressed-gas cylinders, trench protection, traffic separation, weather monitoring, and keeping fire lanes and hydrants clear. Mitigation also includes explicit rules for when site personnel must stop trying to control a problem and call public emergency services. A bridge project, hospital renovation, refinery turnaround, trenching operation, and high-rise concrete pour each have different hazards, exits, and muster needs, so the plan is reassessed as work phases change.

  • Hazard Mitigation Escalation trigger
  • Fire Remove combustibles, maintain 2A extinguishers Smoke spread, heat, blocked egress
  • Severe weather Monitor alerts, secure loose materials Lightning, tornado warning, high wind
  • Collapse Barricades, inspections, exclusion zones Missing worker, instability, rescue need
  • Medical event First aid, AED, EMS access route Unconsciousness, chest pain, major bleeding
  • Toxic release Substitution, ventilation, monitoring Vapor cloud, symptoms, unknown atmosphere
  • Evacuation Versus Shelter-in-Place

Evacuation is appropriate when remaining in place creates greater danger — fire, explosion potential, structural collapse, toxic release, or violence. Shelter-in-place may be safer for tornado warnings, certain off-site chemical releases that would expose workers if they went outdoors, or civil disturbance beyond the perimeter. The EAP must state who makes the decision and how workers are notified, because the wrong choice (sending workers outdoors into a passing chlorine plume, for example) can be fatal.

Accountability must be practical and current. Roll calls, badge scans, crew rosters, or foreman headcounts work only if they reflect today's workforce and are practiced. Missing-person information goes to incident command, not to a supervisor's truck. Untrained workers must never reenter trenches, confined spaces, fire areas, energized zones, or unknown atmospheres to search for missing coworkers — that is how a one-victim event becomes a multiple-fatality event.

CHST Field Check

A CHST should walk evacuation routes, inspect muster areas, verify gate access for responders, test communication methods when permitted, and ask line workers where they go when the alarm sounds. The plan is weak if it depends on one person remembering everything.

Keep exits and the full travel path to them unobstructed.

Orient every new subcontractor crew before they start work.

Update posted maps after layout changes (new fencing, excavation, hoist).

Pre-define the threshold at which public responders are summoned.

A strong plan gives workers two or three simple actions — stop, walk to the muster point, check in — and gives supervisors clear decision points rather than improvisation.

Site-Specific Triggers and Multi-Employer Coordination

The CHST exam favors scenario judgment over memorized lists, so a useful habit is to pre-write decision triggers into the plan. A trigger is an observable condition tied to a required action: "At a National Weather Service tornado warning, sound the long-blast horn and move all crews to the ground-floor interior core," or "If a worker is unaccounted for after two roll calls, the superintendent notifies 911 and no untrained worker reenters." Triggers remove hesitation and prevent each foreman from inventing a different response.

Multi-employer sites complicate accountability because the general contractor (the controlling employer) and each subcontractor share the same exits, alarms, and muster points but maintain separate rosters. The EAP should designate the controlling employer's emergency coordinator as the single point of accountability, require every subcontractor to report headcounts to that coordinator, and specify a common alarm signal so a sub's air horn is not mistaken for routine equipment. Orientation must reach every new crew the day they mobilize, not weeks later.

Finally, the plan must address special populations and conditions : lone workers, night-shift crews with reduced staffing, non-English-speaking workers (pictographs and bilingual wardens), workers with mobility limitations, and high-wind or lightning conditions that make some routes unusable. A plan written for a sunny day-shift workforce will fail at 2 a.m. in a storm.

Write observable triggers, not vague intentions, for each credible emergency.

Name one accountability point for the whole multi-employer site.

Provide bilingual or pictograph instructions where the workforce requires them.

Re-walk routes after every major layout change and re-brief affected crews.