Study guide
First Aid, Medical Needs, Bloodborne Pathogens, and Universal Precautions
BCSP CHST Construction Health and Safety Technician Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: CHST Exam Orientation and Official Source Control
Official Sources and Credential Purpose Eligibility, Application, Fees, and Character Review Exam Format, Scoring, Beta Questions, and Blueprint Pearson VUE Scheduling, Test Day, Results, and Retakes Blueprint-Based Study Plan and Readiness
2 Chapter 2: Hazard and Risk Identification Methods, JHA, and Controls
Hierarchy of Controls and Construction Risk Logic Job Hazard Analysis and Pre-Task Planning Risk Ranking, Severity, Frequency, and Corrective Action Safety Through Design and Construction Means and Methods PPE Selection, Limitations, and Basic Monitoring Instruments Multi-Trade Coordination, Simultaneous Operations, and Interface Risk Field Observation, Documentation, and Control Verification
3 Chapter 3: High-Hazard Construction Operations I - Fall, Electrical, Excavation, Confined Space, Hot Work, Tools, and Concrete
Working at Heights: Ladders, Scaffolds, and Leading Edge Exposures Fall Protection: Arrest, Restraint, and Rescue Planning Excavation and Trenching: Soil, Protection, and Access/Egress Electrical Hazards: Temporary Power, GFCI, and LOTO Awareness Confined Space Recognition, Atmospheric Testing, and Entry Controls Hot Work: Fire Watch, Combustibles, and Permit Controls Hand and Power Tools, Powder-Actuated Tools, and Concrete Work
4 Chapter 4: High-Hazard Construction Operations II - Struck-By, Equipment, Hoisting, Rigging, Cranes, Material Handling, and Storage
Struck-By, Caught-Between, and Line-of-Fire Controls Mechanized Equipment, Mobile Equipment, and Traffic Control Hoisting, Rigging, Sling Inspection, and Load Control Crane Operations, Critical Lifts, Signaling, and Exclusion Zones Material Handling, Storage, Stacking, and Housekeeping Concrete Placement, Formwork, Rebar, and Impalement Controls Simultaneous Operations, Sequencing, and Stop-Work Decisions
5 Chapter 5: Construction Health, Environmental, Chemical, and Ergonomic Exposure Controls
Silica, Asbestos, Lead, Heavy Metals, and Dust Controls Noise, Vibration, Radiation, and Impact Exposure Control Chemical Exposure, GHS, SDS, and HazCom Field Use Heat, Cold, Extreme Climate, and Biological Hazard Controls Ergonomics, Manual Material Handling, and Work Practice Design Exposure Monitoring, PPE Limitations, and Medical Referral Triggers
6 Chapter 6: Emergency Preparedness, Incident Investigation, and Response
Emergency Action Plans, Site Mitigation, and Evacuation Fire Protection, Prevention, Hot Work, and Alarm Response Environmental Contamination, Spill Response, and Notifications Incident Command, Crisis Management, and Emergency Equipment First Aid, Medical Needs, Bloodborne Pathogens, and Universal Precautions Incident Investigation, Near Misses, Root Cause, and Corrective Action Drills, After-Action Reviews, and Return to Operations
7 Chapter 7: Safety Program Development, Implementation, and Sustainment
Site-Specific Safety Plans and Relevant Program Selection Applying Standards, Regulatory Authority, and Role Boundaries Inspections, Audits, Observations, and Corrective Action Tracking Equipment Manuals, Manufacturer Directives, and Field Compliance Risk Management, Data Gathering, Recordkeeping, and Document Control Incident Causation, Post-Incident Reporting, and Follow-Up Trends, Leading Indicators, and Program Sustainment
8 Chapter 8: Leadership, Communication, Training, and Total Worker Health
Safety Leadership, Credibility, and Field Influence Communication Strategy, Crew Briefings, and Conflict Management Training Needs, Task Analysis, and Adult Learning Delivery Toolbox Talks, Competency Verification, and Documentation Consulting Manufacturers, Suppliers, and Subject Matter Experts Confidentiality, Ethics, Document Control, and Current Information Total Worker Health, At-Risk Behavior, and Risk Reduction Activities
9 Chapter 9: Mixed CHST Construction Case Labs
Fall Protection, Scaffold, and Rescue Case Lab Excavation, Confined Space, and Atmospheric Hazard Case Lab Crane, Rigging, Equipment, and Struck-By Case Lab Hot Work, Fire, and HazCom Case Lab Silica, Noise, Heat, and Health Exposure Case Lab Incident Investigation, Program Failure, and Corrective Action Case Lab Superintendent Meeting, Training, and Stop-Work Case Lab
10 Chapter 10: Standards, References, Ethics, and Field Application
OSHA 1926 Navigation and Construction Standard Application Competent Person, Qualified Person, and Authority Boundaries Consensus Standards, Manufacturer Instructions, and Equipment Manuals BCSP Code of Ethics, Confidentiality, and Professional Conduct Exam-Style Reference Use and Best Answer Strategy
11 Chapter 11: Final Review, High-Yield Tables, and CHST Exam-Day Readiness
Blueprint Quick Reference and Domain Triage High-Yield Construction Hazard Control Tables Emergency Program Leadership and Documentation Review Final Week Practice Plan, Error Log, and Pacing Final 48 Hours, Pearson VUE Test Day, and Retake Planning
First Aid, Medical Needs, Bloodborne Pathogens, and Universal Precautions
Key Takeaways Explain This Topic AI
OSHA 1926.50 requires a trained first-aid provider when a clinic or hospital is not in near proximity to the worksite.
Scene safety precedes care — an untrained rescuer who enters a hazard becomes a second victim.
Universal (standard) precautions treat all blood and certain body fluids as potentially infectious regardless of the source person.
Bloodborne-pathogen controls under 29 CFR 1910.1030 include PPE, hand hygiene, sharps handling, an exposure-control plan, training, and the hepatitis B vaccine offered free.
Last updated: October 2026
- First Aid, Medical Needs, Bloodborne Pathogens, and Universal Precautions
- Medical Readiness
Construction medical planning must fit the site. Likely events include lacerations, burns, eye injuries, falls, struck-by and crush injuries, electrical shock, heat illness, cold stress, respiratory exposure, and cardiac emergencies. OSHA 29 CFR 1926.50 requires that, where a clinic, hospital, or physician is not in near proximity to the worksite, a person trained to render first aid be available, and that adequate first-aid supplies be readily accessible. Planning weighs crew size, shift schedule, gate access, EMS distance and response time, language needs, remote work, work at height, confined spaces, and rescue difficulty. A first-aid kit in a trailer is useless if the injured worker is six floors up and EMS cannot find the gate.
Even where EMS is close, trained workers can activate response, control bleeding, begin CPR and AED use, flush eyes, cool a heat-illness patient, and guide responders in. The EAP must tell workers how to report injuries and who meets EMS at the entrance.
Scene Safety and First-Aid Limits
Scene safety comes first. A responder must not enter an energized area, traffic lane, unstable excavation, confined space, fire area, chemical release, or collapse zone without proper training and controls — doing so creates a second casualty. The correct first actions are: assess hazards, call for help, control or isolate the scene if it can be done safely, then provide care within one's training.
Activate EMS for serious bleeding, loss of consciousness, chest pain, breathing difficulty, suspected stroke, severe burns, electrical shock, suspected spinal injury, major fracture, heat-stroke signs, significant chemical exposure, amputation, crushing injury, or any condition beyond first aid.
Need Control CHST check
Major bleeding Gloves, trauma dressings, tourniquet Who is trained and where are supplies?
Cardiac arrest AED plus CPR-trained responders Can EMS physically reach the patient?
Chemical splash to eyes Eyewash or emergency shower (15-min flush) Is access unobstructed and water tepid?
Heat illness Water, shade, active cooling Are supervisors trained to recognize it?
First-aid supplies must be inspected, stocked, visible, and protected from contamination. Higher-risk sites add AEDs, plumbed eyewash/showers, stretchers, rescue baskets, trauma kits, and heat-illness cooling supplies.
Universal Precautions and Bloodborne Pathogens
Universal precautions (today often called standard precautions) mean treating all blood and certain other potentially infectious materials as infectious every time, without judging risk by a person's appearance or job. Controls include gloves, eye and face protection for splash risk, CPR barriers, hand hygiene, disinfectant, biohazard bags, and sharps containers.
Bloodborne pathogens of greatest concern are hepatitis B virus (HBV), hepatitis C virus (HCV), and human immunodeficiency virus (HIV) . The governing standard is 29 CFR 1910.1030 , which applies to workers with reasonably anticipated occupational exposure — designated first-aid responders, cleanup crews, and anyone handling discarded needles or contaminated debris. The standard requires a written exposure control plan , engineering and work-practice controls, PPE, training, recordkeeping, and the hepatitis B vaccine offered at no cost to covered employees.
If blood or other potentially infectious material contacts broken skin, eyes, mouth, or mucous membranes, or enters through a needlestick or cut, the worker should wash or flush immediately, report the exposure, and obtain post-exposure medical evaluation under the exposure-control plan. Trained personnel perform contaminated cleanup using appropriate disinfectant. Never pick up broken glass or sharps by hand; use mechanical means and a sharps container. Dispose of contaminated material as regulated waste and wash hands after removing gloves.
Do not delay EMS activation to complete paperwork.
Keep medical access routes and gates open.
Document the care given, witnesses, and follow-up.
Honor medical restrictions before any return to work.
Heat Illness: A Construction Priority
Heat illness is one of the most common — and most preventable — medical emergencies on construction sites, and the exam treats recognition as a life-or-death distinction. Heat exhaustion presents with heavy sweating, weakness, nausea, headache, and a normal-to-elevated temperature; the worker is moved to shade, given water and active cooling, and monitored. Heat stroke is a true medical emergency: the worker may have hot skin, confusion or altered mental status, collapse, or seizures, and the temperature regulation has failed. Heat stroke requires immediate EMS activation and aggressive cooling (ice, cold water immersion, wetting and fanning) without delay — confusing the two and merely offering water can be fatal. Prevention follows water-rest-shade plus acclimatization for new and returning workers over the first week.
Distinguishing Emergencies From First Aid
The CHST must teach crews a clear line. Conditions like a fingertip laceration, a single-eye foreign body flushed clear, or a minor first-degree burn are first aid. Conditions like chest pain, altered consciousness, uncontrolled bleeding, suspected spinal injury, amputation, electrical contact, or heat stroke are EMS-now events.
- Sign or symptom Likely interpretation Action
- Confusion, hot dry skin after exertion Heat stroke EMS now, aggressive cooling
- Spurting or pooling blood Major hemorrhage Direct pressure, tourniquet, EMS
- No pulse, not breathing Cardiac arrest CPR, AED, EMS
- Numbness or weakness after a fall Possible spinal injury Do not move, EMS
- Exposure Incidents and Recordkeeping
When a needlestick or blood splash occurs, the post-exposure pathway under 1910.1030 is time-sensitive: immediate washing or flushing, prompt reporting, and confidential medical evaluation that may include source-individual testing and prophylaxis. The employer documents the route of exposure and circumstances and provides the evaluating professional with the relevant information. Sharps-injury logs and the exposure-control plan must be reviewed at least annually and updated for new tasks or safer devices.
Treat hot, confused, collapsed workers as heat stroke and call EMS immediately.
Pre-teach the EMS-now list so crews do not hesitate.
Follow the written post-exposure pathway after any blood contact.
Review the exposure-control plan and sharps log at least yearly.