Study guide
Eligibility, Application, Fees, and Character Review
BCSP CHST Construction Health and Safety Technician Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: CHST Exam Orientation and Official Source Control
Official Sources and Credential Purpose Eligibility, Application, Fees, and Character Review Exam Format, Scoring, Beta Questions, and Blueprint Pearson VUE Scheduling, Test Day, Results, and Retakes Blueprint-Based Study Plan and Readiness
2 Chapter 2: Hazard and Risk Identification Methods, JHA, and Controls
Hierarchy of Controls and Construction Risk Logic Job Hazard Analysis and Pre-Task Planning Risk Ranking, Severity, Frequency, and Corrective Action Safety Through Design and Construction Means and Methods PPE Selection, Limitations, and Basic Monitoring Instruments Multi-Trade Coordination, Simultaneous Operations, and Interface Risk Field Observation, Documentation, and Control Verification
3 Chapter 3: High-Hazard Construction Operations I - Fall, Electrical, Excavation, Confined Space, Hot Work, Tools, and Concrete
Working at Heights: Ladders, Scaffolds, and Leading Edge Exposures Fall Protection: Arrest, Restraint, and Rescue Planning Excavation and Trenching: Soil, Protection, and Access/Egress Electrical Hazards: Temporary Power, GFCI, and LOTO Awareness Confined Space Recognition, Atmospheric Testing, and Entry Controls Hot Work: Fire Watch, Combustibles, and Permit Controls Hand and Power Tools, Powder-Actuated Tools, and Concrete Work
4 Chapter 4: High-Hazard Construction Operations II - Struck-By, Equipment, Hoisting, Rigging, Cranes, Material Handling, and Storage
Struck-By, Caught-Between, and Line-of-Fire Controls Mechanized Equipment, Mobile Equipment, and Traffic Control Hoisting, Rigging, Sling Inspection, and Load Control Crane Operations, Critical Lifts, Signaling, and Exclusion Zones Material Handling, Storage, Stacking, and Housekeeping Concrete Placement, Formwork, Rebar, and Impalement Controls Simultaneous Operations, Sequencing, and Stop-Work Decisions
5 Chapter 5: Construction Health, Environmental, Chemical, and Ergonomic Exposure Controls
Silica, Asbestos, Lead, Heavy Metals, and Dust Controls Noise, Vibration, Radiation, and Impact Exposure Control Chemical Exposure, GHS, SDS, and HazCom Field Use Heat, Cold, Extreme Climate, and Biological Hazard Controls Ergonomics, Manual Material Handling, and Work Practice Design Exposure Monitoring, PPE Limitations, and Medical Referral Triggers
6 Chapter 6: Emergency Preparedness, Incident Investigation, and Response
Emergency Action Plans, Site Mitigation, and Evacuation Fire Protection, Prevention, Hot Work, and Alarm Response Environmental Contamination, Spill Response, and Notifications Incident Command, Crisis Management, and Emergency Equipment First Aid, Medical Needs, Bloodborne Pathogens, and Universal Precautions Incident Investigation, Near Misses, Root Cause, and Corrective Action Drills, After-Action Reviews, and Return to Operations
7 Chapter 7: Safety Program Development, Implementation, and Sustainment
Site-Specific Safety Plans and Relevant Program Selection Applying Standards, Regulatory Authority, and Role Boundaries Inspections, Audits, Observations, and Corrective Action Tracking Equipment Manuals, Manufacturer Directives, and Field Compliance Risk Management, Data Gathering, Recordkeeping, and Document Control Incident Causation, Post-Incident Reporting, and Follow-Up Trends, Leading Indicators, and Program Sustainment
8 Chapter 8: Leadership, Communication, Training, and Total Worker Health
Safety Leadership, Credibility, and Field Influence Communication Strategy, Crew Briefings, and Conflict Management Training Needs, Task Analysis, and Adult Learning Delivery Toolbox Talks, Competency Verification, and Documentation Consulting Manufacturers, Suppliers, and Subject Matter Experts Confidentiality, Ethics, Document Control, and Current Information Total Worker Health, At-Risk Behavior, and Risk Reduction Activities
9 Chapter 9: Mixed CHST Construction Case Labs
Fall Protection, Scaffold, and Rescue Case Lab Excavation, Confined Space, and Atmospheric Hazard Case Lab Crane, Rigging, Equipment, and Struck-By Case Lab Hot Work, Fire, and HazCom Case Lab Silica, Noise, Heat, and Health Exposure Case Lab Incident Investigation, Program Failure, and Corrective Action Case Lab Superintendent Meeting, Training, and Stop-Work Case Lab
10 Chapter 10: Standards, References, Ethics, and Field Application
OSHA 1926 Navigation and Construction Standard Application Competent Person, Qualified Person, and Authority Boundaries Consensus Standards, Manufacturer Instructions, and Equipment Manuals BCSP Code of Ethics, Confidentiality, and Professional Conduct Exam-Style Reference Use and Best Answer Strategy
11 Chapter 11: Final Review, High-Yield Tables, and CHST Exam-Day Readiness
Blueprint Quick Reference and Domain Triage High-Yield Construction Hazard Control Tables Emergency Program Leadership and Documentation Review Final Week Practice Plan, Error Log, and Pacing Final 48 Hours, Pearson VUE Test Day, and Retake Planning
Eligibility, Application, Fees, and Character Review
Key Takeaways Explain This Topic AI
CHST eligibility requires at least 3 years of construction safety, health, and environmental experience.
At least 35 percent of the candidate's duties must require technical SH&E knowledge.
No formal degree is required; eligibility is duty-based, not title-based.
Core fees are $140 application and $300 exam; budget for extension ($100) and annual renewal ($150) too.
Application includes honest character disclosure, and approval opens a one-year window to take and pass.
Last updated: October 2026
- Eligibility, Application, Fees, and Character Review
- Eligibility is part of exam readiness
CHST preparation starts before the first practice quiz. You must be eligible to sit, and eligibility is not just paperwork. BCSP identifies the CHST as a credential for people who work part-time or full-time in construction safety. The role must include at least 35 percent of duties that require technical SH&E knowledge, and you must have at least 3 years of construction safety, health, and environmental experience. Notably, no formal degree is required — the CHST is one of BCSP's experience-based technician credentials, which is part of why it is popular with field supervisors and safety coordinators.
The 35 percent requirement focuses on duty content, not job title alone. Someone may hold a safety-sounding title yet spend little time on technical SH&E work, while a field worker may spend substantial time inspecting work areas, supporting hazard controls, assisting training, reviewing incident trends, and coordinating emergency readiness. For CHST purposes, think in terms of actual duties, time allocation, and construction context.
Documenting your experience
Create a plain record of your construction SH&E experience before applying. Include employer names, project types, dates, supervisors, and concrete examples of duties. Use direct language that connects your work to technical SH&E knowledge — for example: hazard recognition, fall-protection inspections, excavation safety coordination, confined-space entry support, industrial-hygiene sampling assistance, environmental controls, incident investigation, pre-task planning, and toolbox safety training.
A strong record does not exaggerate; it shows the link between daily work and the eligibility standard. If your duties changed over time, separate them by period instead of averaging into a vague statement. If your construction work is part-time, still document the dates and your technical SH&E percentage carefully, because the 35 percent test applies to the proportion of qualifying duties, not raw hours.
Application and character review
The official process includes the application, character disclosure , passing the exam, and maintaining certification. Character disclosure means answering application questions honestly and completely about matters such as felony convictions or professional discipline. Do not treat disclosure as optional. If a question applies to you, read it carefully and respond as BCSP requires; when in doubt, follow BCSP's process rather than guessing based on another candidate's story. False or incomplete disclosure can jeopardize the credential even after passing.
Application approval creates an exam window. Candidates have one year from approval to take and pass the exam. This is a planning constraint: applying too early without a study plan wastes eligibility time, while waiting too long can compress study, scheduling, and any retake.
Fee planning
The official fee amounts to budget for are:
- Fee item Amount
- Application $140
- Exam $300
- Application + exam combo $426
- Exam bundle $550
- Application + exam bundle $676
- Eligibility extension $100
- Annual renewal $150
These amounts affect decisions. A candidate ready to move quickly may choose a combined payment option; a candidate still confirming eligibility may keep the steps separate. The application ($140) and exam ($300) are the unavoidable core, so a typical first-time path runs $440 before any bundle. Always confirm against current BCSP figures rather than a number copied from an old forum post — BCSP has adjusted these fees over time.
Maintain certification after passing
Passing the CHST is not the end of credential management. You must maintain it through a 5-year recertification cycle requiring 20 points , including an ethics requirement, plus the annual renewal fee. This matters even before testing, because the credential represents ongoing professional practice. Start the habit early: save training records, conference certificates, employer education records, and ethics documentation, so recertification is a matter of submitting evidence rather than reconstructing five years of activity.
Practical pre-submission checklist
Before submitting your application, confirm each item:
You work part-time or full-time in construction safety.
At least 35 percent of your duties require technical SH&E knowledge.
You have at least 3 years of construction SH&E experience.
Your application details are accurate and internally consistent.
You are ready to complete required character disclosure honestly.
Your study schedule fits the one-year approval window.
Your budget covers application, exam, possible extension, and renewal.
Treat eligibility as your first quality-control review. A careful candidate enters the process with fewer surprises and a cleaner path from application to scheduling.
How the 35 percent test is applied
The 35 percent rule is about the share of your role that requires technical SH&E knowledge, evaluated across your experience. Consider two candidates. Candidate A is a full-time "site safety coordinator" who spends about 80 percent of time on inspections, hazard analysis, training, and incident review — clearly above the threshold. Candidate B is a working foreman whose title sounds operational but who runs daily pre-task plans, conducts excavation and fall-protection checks, and leads toolbox talks for roughly 40 percent of the workweek; B also qualifies because duties, not title, control. A candidate who only signs forms or attends meetings without technical SH&E judgment would not qualify, even with a safety title. Document the percentage honestly and per role, because BCSP can request supporting detail.
Sequencing the application
A clean sequence prevents wasted eligibility time. Confirm your experience meets 3 years and 35 percent, draft your duty record, then submit the application ($140) and complete character disclosure. Once BCSP approves, the one-year clock to take and pass begins, so do not apply until your study runway is realistic. Only after approval should you pay the exam fee ($300) and schedule through Pearson VUE. If you risk running out of time, the $100 eligibility extension exists, but plan to avoid needing it. Mapping the steps in order — eligibility check, application, approval, exam payment, scheduling, sitting, and then recertification setup — keeps fees, deadlines, and disclosure aligned rather than colliding in the final weeks.