Study guide
Official Sources and Credential Purpose
BCSP CHST Construction Health and Safety Technician Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: CHST Exam Orientation and Official Source Control
Official Sources and Credential Purpose Eligibility, Application, Fees, and Character Review Exam Format, Scoring, Beta Questions, and Blueprint Pearson VUE Scheduling, Test Day, Results, and Retakes Blueprint-Based Study Plan and Readiness
2 Chapter 2: Hazard and Risk Identification Methods, JHA, and Controls
Hierarchy of Controls and Construction Risk Logic Job Hazard Analysis and Pre-Task Planning Risk Ranking, Severity, Frequency, and Corrective Action Safety Through Design and Construction Means and Methods PPE Selection, Limitations, and Basic Monitoring Instruments Multi-Trade Coordination, Simultaneous Operations, and Interface Risk Field Observation, Documentation, and Control Verification
3 Chapter 3: High-Hazard Construction Operations I - Fall, Electrical, Excavation, Confined Space, Hot Work, Tools, and Concrete
Working at Heights: Ladders, Scaffolds, and Leading Edge Exposures Fall Protection: Arrest, Restraint, and Rescue Planning Excavation and Trenching: Soil, Protection, and Access/Egress Electrical Hazards: Temporary Power, GFCI, and LOTO Awareness Confined Space Recognition, Atmospheric Testing, and Entry Controls Hot Work: Fire Watch, Combustibles, and Permit Controls Hand and Power Tools, Powder-Actuated Tools, and Concrete Work
4 Chapter 4: High-Hazard Construction Operations II - Struck-By, Equipment, Hoisting, Rigging, Cranes, Material Handling, and Storage
Struck-By, Caught-Between, and Line-of-Fire Controls Mechanized Equipment, Mobile Equipment, and Traffic Control Hoisting, Rigging, Sling Inspection, and Load Control Crane Operations, Critical Lifts, Signaling, and Exclusion Zones Material Handling, Storage, Stacking, and Housekeeping Concrete Placement, Formwork, Rebar, and Impalement Controls Simultaneous Operations, Sequencing, and Stop-Work Decisions
5 Chapter 5: Construction Health, Environmental, Chemical, and Ergonomic Exposure Controls
Silica, Asbestos, Lead, Heavy Metals, and Dust Controls Noise, Vibration, Radiation, and Impact Exposure Control Chemical Exposure, GHS, SDS, and HazCom Field Use Heat, Cold, Extreme Climate, and Biological Hazard Controls Ergonomics, Manual Material Handling, and Work Practice Design Exposure Monitoring, PPE Limitations, and Medical Referral Triggers
6 Chapter 6: Emergency Preparedness, Incident Investigation, and Response
Emergency Action Plans, Site Mitigation, and Evacuation Fire Protection, Prevention, Hot Work, and Alarm Response Environmental Contamination, Spill Response, and Notifications Incident Command, Crisis Management, and Emergency Equipment First Aid, Medical Needs, Bloodborne Pathogens, and Universal Precautions Incident Investigation, Near Misses, Root Cause, and Corrective Action Drills, After-Action Reviews, and Return to Operations
7 Chapter 7: Safety Program Development, Implementation, and Sustainment
Site-Specific Safety Plans and Relevant Program Selection Applying Standards, Regulatory Authority, and Role Boundaries Inspections, Audits, Observations, and Corrective Action Tracking Equipment Manuals, Manufacturer Directives, and Field Compliance Risk Management, Data Gathering, Recordkeeping, and Document Control Incident Causation, Post-Incident Reporting, and Follow-Up Trends, Leading Indicators, and Program Sustainment
8 Chapter 8: Leadership, Communication, Training, and Total Worker Health
Safety Leadership, Credibility, and Field Influence Communication Strategy, Crew Briefings, and Conflict Management Training Needs, Task Analysis, and Adult Learning Delivery Toolbox Talks, Competency Verification, and Documentation Consulting Manufacturers, Suppliers, and Subject Matter Experts Confidentiality, Ethics, Document Control, and Current Information Total Worker Health, At-Risk Behavior, and Risk Reduction Activities
9 Chapter 9: Mixed CHST Construction Case Labs
Fall Protection, Scaffold, and Rescue Case Lab Excavation, Confined Space, and Atmospheric Hazard Case Lab Crane, Rigging, Equipment, and Struck-By Case Lab Hot Work, Fire, and HazCom Case Lab Silica, Noise, Heat, and Health Exposure Case Lab Incident Investigation, Program Failure, and Corrective Action Case Lab Superintendent Meeting, Training, and Stop-Work Case Lab
10 Chapter 10: Standards, References, Ethics, and Field Application
OSHA 1926 Navigation and Construction Standard Application Competent Person, Qualified Person, and Authority Boundaries Consensus Standards, Manufacturer Instructions, and Equipment Manuals BCSP Code of Ethics, Confidentiality, and Professional Conduct Exam-Style Reference Use and Best Answer Strategy
11 Chapter 11: Final Review, High-Yield Tables, and CHST Exam-Day Readiness
Blueprint Quick Reference and Domain Triage High-Yield Construction Hazard Control Tables Emergency Program Leadership and Documentation Review Final Week Practice Plan, Error Log, and Pacing Final 48 Hours, Pearson VUE Test Day, and Retake Planning
Official Sources and Credential Purpose
Key Takeaways Explain This Topic AI
The CHST is a Board of Certified Safety Professionals (BCSP) credential for construction safety, health, and environmental practice.
Source control means BCSP-published facts override any commercial book, forum, or class handout when they conflict.
The current exam blueprint is CHST5 V.2022.04.12, with four weighted domains.
Hazard and Risk Identification and Control is the largest domain at 36.6 percent of the exam.
Keep a source log recording each fact, the date checked, and the BCSP source so administrative claims stay current.
Last updated: October 2026
- Official Sources and Credential Purpose
- Why source control matters
The Construction Health and Safety Technician (CHST) is a credential from the Board of Certified Safety Professionals (BCSP) . Before studying hazards, programs, training, or emergency response, you need a reliable way to separate official exam facts from jobsite habits and outdated internet summaries. Source control is the practice of deciding which reference has authority when two sources conflict. For this guide, official BCSP facts control the credential name, eligibility rules, fee amounts, exam timing, question count, retake window, recertification cycle, the exam blueprint, and exam-day policies. Everything else is a learning aid.
This distinction matters because administrative rules change independently of safety knowledge. A practice question may teach a sound concept yet describe an old fee, a retired blueprint, or a former scheduling process. BCSP raised exam fees and revised the blueprint in recent cycles, so a 2019 study book can be technically correct about fall protection while being wrong about the $300 exam fee or the four-domain structure. Treat the BCSP source as the record of truth and treat every commercial book, flashcard deck, video, or forum post as secondary.
Credential purpose
The CHST recognizes people who perform construction safety, health, and environmental (SH&E) work. It is not tied to a single trade, contractor tier, or project type. It validates applied technical SH&E knowledge in construction settings: recognizing hazards, helping control risk, supporting programs, communicating requirements, training workers, preparing for emergencies, and responding to incidents. Importantly, the CHST is a professional certification — not a license. It does not authorize you to enforce OSHA standards, sign off on engineering designs, or act with regulatory authority.
That purpose should shape your method. The exam does not ask you to recite isolated definitions; it tests whether you can choose the best answer for a realistic construction situation. Many items reward candidates who understand the hierarchy of controls, job hazard analysis, inspections, incident investigation, training delivery, and leadership communication under practical conditions. Source control is therefore not separate from technical study — it keeps your attention on the kinds of decisions the credential measures.
Official facts to protect
Use these official anchors as fixed reference points for the whole chapter:
- Item Official orientation fact
- Organization Board of Certified Safety Professionals (BCSP)
- Credential Construction Health and Safety Technician (CHST)
- Exam blueprint CHST5 V.2022.04.12
- Total questions 200 (roughly 12% are unscored beta items)
- Exam time 4 hours
- Delivery vendor Pearson VUE test center via BCSP My Profile single sign-on
- Retake minimum At least 6 weeks from last attempt
- Recertification 20 points over a 5-year cycle, including ethics
- Passing score Criterion-referenced; no fixed public percentage
These anchors let you audit future notes. If a lecture slide, employer handout, or old checklist uses a different credential title, a different blueprint version, a fixed passing percentage, or a fee number that does not match BCSP, flag it before relying on it. The goal is not to reject outside resources — it is to know which parts are support and which are official requirements.
How to use unofficial materials
Unofficial materials are valuable for explanations, worked practice, examples, and repetition. They become risky when they make administrative claims without a date or source. A simple rule works: learn concepts from many sources, but verify rules with BCSP. If a question bank claims the exam has a fixed passing percentage such as "you only need 70 percent," do not memorize it — BCSP uses criterion-referenced scoring and publishes no fixed public percentage. If a guide says the exam has 175 questions, correct it: BCSP lists 200 items, and its exam-day guidance says roughly 12 percent are unscored beta questions that are not identified.
Use outside materials to build fluency across the blueprint, then map every session back to the four domains. This prevents overstudying familiar material and understudying high-weight domains. For example, if you enjoy training topics but avoid quantitative hazard analysis, the blueprint tells you that Hazard and Risk Identification and Control carries the largest share at 36.6 percent — far more than any other single domain.
Candidate file checklist
Build one candidate file before deep study begins:
BCSP My Profile login access and current contact information.
Eligibility notes showing at least 3 years of construction SH&E experience.
Fee and deadline notes checked against current BCSP figures.
Blueprint percentages copied from CHST5 V.2022.04.12.
A study calendar tied to the one-year approval window.
A retake note showing the minimum 6-week wait after any attempt.
This file reduces friction when scheduling, retesting, renewing, and choosing where to study next. The first exam skill is operational control: know the credential, know the official source, and know which facts are not negotiable.
A worked source-control example
Suppose three resources disagree about the exam. A 2018 study book says the CHST has 175 questions; a forum thread says you need 70 percent to pass; a recent class handout lists the blueprint domains but omits weights. Source control resolves all three. BCSP states the exam delivers 200 items and that roughly 12 percent are unscored beta questions, so the book's 175 does not describe the current exam — correct the number in your note rather than discarding the whole book. The forum's 70 percent claim conflicts with BCSP's criterion-referenced model, so reject it outright; there is no published percentage. The handout's domain list is fine, but pull the weights from CHST5 V.2022.04.12 because weights drive your time budget. In each case the rule is the same: BCSP wins, and you record the date you checked.
Common orientation traps
Candidates lose points and time on a handful of avoidable errors. First, assuming the CHST is an OSHA program — it is a BCSP certification, separate from any government agency. Second, confusing the CHST with the related Safety Trained Supervisor Construction (STSC) or the Associate Safety Professional (ASP) ; each is a distinct BCSP credential with its own blueprint and eligibility. Third, copying a fixed passing percentage from a competitor exam into CHST notes. Fourth, trusting a screenshot of fees from an undated post. Treat each of these as a flag in your source log, resolve it against BCSP, and move on with a clean, current set of anchors.