Study guide
High-Yield Construction Hazard Control Tables
BCSP CHST Construction Health and Safety Technician Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: CHST Exam Orientation and Official Source Control
Official Sources and Credential Purpose Eligibility, Application, Fees, and Character Review Exam Format, Scoring, Beta Questions, and Blueprint Pearson VUE Scheduling, Test Day, Results, and Retakes Blueprint-Based Study Plan and Readiness
2 Chapter 2: Hazard and Risk Identification Methods, JHA, and Controls
Hierarchy of Controls and Construction Risk Logic Job Hazard Analysis and Pre-Task Planning Risk Ranking, Severity, Frequency, and Corrective Action Safety Through Design and Construction Means and Methods PPE Selection, Limitations, and Basic Monitoring Instruments Multi-Trade Coordination, Simultaneous Operations, and Interface Risk Field Observation, Documentation, and Control Verification
3 Chapter 3: High-Hazard Construction Operations I - Fall, Electrical, Excavation, Confined Space, Hot Work, Tools, and Concrete
Working at Heights: Ladders, Scaffolds, and Leading Edge Exposures Fall Protection: Arrest, Restraint, and Rescue Planning Excavation and Trenching: Soil, Protection, and Access/Egress Electrical Hazards: Temporary Power, GFCI, and LOTO Awareness Confined Space Recognition, Atmospheric Testing, and Entry Controls Hot Work: Fire Watch, Combustibles, and Permit Controls Hand and Power Tools, Powder-Actuated Tools, and Concrete Work
4 Chapter 4: High-Hazard Construction Operations II - Struck-By, Equipment, Hoisting, Rigging, Cranes, Material Handling, and Storage
Struck-By, Caught-Between, and Line-of-Fire Controls Mechanized Equipment, Mobile Equipment, and Traffic Control Hoisting, Rigging, Sling Inspection, and Load Control Crane Operations, Critical Lifts, Signaling, and Exclusion Zones Material Handling, Storage, Stacking, and Housekeeping Concrete Placement, Formwork, Rebar, and Impalement Controls Simultaneous Operations, Sequencing, and Stop-Work Decisions
5 Chapter 5: Construction Health, Environmental, Chemical, and Ergonomic Exposure Controls
Silica, Asbestos, Lead, Heavy Metals, and Dust Controls Noise, Vibration, Radiation, and Impact Exposure Control Chemical Exposure, GHS, SDS, and HazCom Field Use Heat, Cold, Extreme Climate, and Biological Hazard Controls Ergonomics, Manual Material Handling, and Work Practice Design Exposure Monitoring, PPE Limitations, and Medical Referral Triggers
6 Chapter 6: Emergency Preparedness, Incident Investigation, and Response
Emergency Action Plans, Site Mitigation, and Evacuation Fire Protection, Prevention, Hot Work, and Alarm Response Environmental Contamination, Spill Response, and Notifications Incident Command, Crisis Management, and Emergency Equipment First Aid, Medical Needs, Bloodborne Pathogens, and Universal Precautions Incident Investigation, Near Misses, Root Cause, and Corrective Action Drills, After-Action Reviews, and Return to Operations
7 Chapter 7: Safety Program Development, Implementation, and Sustainment
Site-Specific Safety Plans and Relevant Program Selection Applying Standards, Regulatory Authority, and Role Boundaries Inspections, Audits, Observations, and Corrective Action Tracking Equipment Manuals, Manufacturer Directives, and Field Compliance Risk Management, Data Gathering, Recordkeeping, and Document Control Incident Causation, Post-Incident Reporting, and Follow-Up Trends, Leading Indicators, and Program Sustainment
8 Chapter 8: Leadership, Communication, Training, and Total Worker Health
Safety Leadership, Credibility, and Field Influence Communication Strategy, Crew Briefings, and Conflict Management Training Needs, Task Analysis, and Adult Learning Delivery Toolbox Talks, Competency Verification, and Documentation Consulting Manufacturers, Suppliers, and Subject Matter Experts Confidentiality, Ethics, Document Control, and Current Information Total Worker Health, At-Risk Behavior, and Risk Reduction Activities
9 Chapter 9: Mixed CHST Construction Case Labs
Fall Protection, Scaffold, and Rescue Case Lab Excavation, Confined Space, and Atmospheric Hazard Case Lab Crane, Rigging, Equipment, and Struck-By Case Lab Hot Work, Fire, and HazCom Case Lab Silica, Noise, Heat, and Health Exposure Case Lab Incident Investigation, Program Failure, and Corrective Action Case Lab Superintendent Meeting, Training, and Stop-Work Case Lab
10 Chapter 10: Standards, References, Ethics, and Field Application
OSHA 1926 Navigation and Construction Standard Application Competent Person, Qualified Person, and Authority Boundaries Consensus Standards, Manufacturer Instructions, and Equipment Manuals BCSP Code of Ethics, Confidentiality, and Professional Conduct Exam-Style Reference Use and Best Answer Strategy
11 Chapter 11: Final Review, High-Yield Tables, and CHST Exam-Day Readiness
Blueprint Quick Reference and Domain Triage High-Yield Construction Hazard Control Tables Emergency Program Leadership and Documentation Review Final Week Practice Plan, Error Log, and Pacing Final 48 Hours, Pearson VUE Test Day, and Retake Planning
High-Yield Construction Hazard Control Tables
Key Takeaways Explain This Topic AI
High-yield review connects hazards, exposures, controls, and the verification evidence that proves control.
The hierarchy of controls (elimination, substitution, engineering, administrative, PPE) is the fastest answer filter.
Construction questions often test recognition of changing conditions, not static definitions.
OSHA construction triggers (6-foot fall protection, trench protection at 5 feet, 50 micrograms-per-cubic-meter silica PEL) are high-yield anchors.
A CHST should choose controls that are feasible, timely, and stronger than warning-only responses.
Last updated: June 2026
- High-Yield Construction Hazard Control Tables
- How To Use The Tables
A final-review table should do more than list hazards. It should connect the hazard to the exposure , the preferred control , and the evidence that the control is working. CHST questions often place you in field conditions where several facts are true at once: the crew is behind schedule, weather changed, the subcontractor is new, a permit exists, and a worker is exposed anyway. In that setting, the best answer is usually the one that controls the exposure now and improves the system afterward.
Core Hazard Controls With OSHA Triggers
Hazard area Key OSHA trigger (29 CFR 1926) Stronger controls Weak answer pattern
Falls Fall protection at 6 ft in construction (Subpart M) Guardrails, hole covers, personal fall arrest system (PFAS), platform selection, inspection Tell workers to be careful
Excavation Protective system required at 5 ft (Subpart P) Sloping/shoring/shielding, competent person daily inspection, safe egress within 25 ft, spoil 2 ft from edge Enter quickly to finish
Electrical GFCI or assured grounding on temp power (Subpart K) De-energize, lockout/tagout, GFCI, inspect cords, qualified repair Tape damaged cords and continue
Struck-by High-visibility apparel, traffic control (Subpart G/O) Exclusion zones, spotters, internal traffic control plan, lift plans Rely only on backup alarms
Caught-in Machine guarding, energy control (Subpart O) Fixed guards, lockout, blocking, barricades Remove guards for speed
Respirable crystalline silica PEL 50 micrograms-per-cubic-meter, action level 25 (1926.1153) Substitute, wet methods, local exhaust ventilation, Table 1 controls, respirators, monitoring Give PPE without assessment
Hierarchy Of Controls Under Pressure
Use the hierarchy as your answer filter: elimination, substitution, engineering controls, administrative controls, PPE . Elimination and engineering controls outrank training-only or PPE-only choices when the question asks for the best long-term control. Administrative controls still matter, especially permits, inspections, competent-person review, pre-task planning, exposure rotation, and access control, but they should never excuse a missing physical control.
A common trap is a familiar but incomplete answer. A toolbox talk may help after repeated ladder misuse, but if the stem says a ladder is damaged , the immediate best action is to remove it from service. A written hot-work permit may be required, but it does not replace fire watch, combustible control, extinguisher readiness, and post-work monitoring when the situation needs them.
Changing Conditions Table
Condition changed CHST concern Best review question
Rain after excavation inspection Soil stability, water accumulation Has the competent person reinspected before entry?
New subcontractor arrives Orientation, site-specific hazards Did workers receive current instructions?
Crane path changes Swing radius, ground bearing, power lines (20 ft for under 350 kV) Was the lift plan or exclusion zone updated?
Heat index rises Heat illness prevention Are water, rest, shade, and acclimatization addressed?
Work moves indoors Ventilation, evacuation Are fumes, noise, access, and alarms controlled?
Documentation That Supports Control
Good records prove a control was planned, communicated, inspected, and corrected: job hazard analyses (JHAs) , pre-task plans, inspection forms, permits, exposure monitoring, training records, incident reports, corrective-action logs, equipment inspections, and safety data sheet (SDS) access. When the exam asks what to review after a trend appears, choose the document that reveals the source of risk and whether controls were maintained.
Worked Hazard Scenario
Walk one scenario the way the exam frames it. A crew cuts concrete with a gas-powered handheld saw indoors after a schedule change moved the work inside. Dust is visible, the area is poorly ventilated, and two workers wear no respirators. The weak answer hands out dust masks and continues. The strong answer applies the silica standard's hierarchy: first reduce dust at the source with wet cutting or an integrated water-feed and a vacuum dust collector (engineering controls), then add ventilation, and only then assign appropriate respiratory protection while exposures remain above the action level. Verification follows: confirm wet methods are running, check that the vacuum filter is rated and maintained, and use air monitoring to compare exposure against the 50-microgram-per-cubic-meter permissible exposure limit. Notice the order: controls before paperwork, source before PPE, and verification before declaring the problem solved.
Reading The Trap Answers
Hazard items are built so one answer is technically true but incomplete, and the trap is choosing it. Common trap shapes include: a control that is real but lower in the hierarchy than a feasible stronger one; an administrative fix offered while an active physical exposure goes uncontrolled; a step that is correct but out of sequence (PPE before engineering controls); and a confident-sounding action that exceeds the CHST role, such as authorizing a structural repair. When you spot two answers that both "work," ask which one controls the exposure at the highest feasible level and which one a safety auditor would defend. That comparison, not familiarity with the wording, is what the one-best-answer format is testing.
Final Drill
For each hazard missed in practice, write one line: hazard, exposure, best control, verification. Example: silica cutting, respirable dust, wet method plus local exhaust ventilation with respirators as needed, verify by observation and exposure monitoring against the 50-microgram PEL. This habit turns memorized words into defensible field decisions, and reviewing the list daily keeps the strongest control top of mind for the largest-weight domain.