Study guide
Competent Person, Qualified Person, and Authority Boundaries
BCSP CHST Construction Health and Safety Technician Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: CHST Exam Orientation and Official Source Control
Official Sources and Credential Purpose Eligibility, Application, Fees, and Character Review Exam Format, Scoring, Beta Questions, and Blueprint Pearson VUE Scheduling, Test Day, Results, and Retakes Blueprint-Based Study Plan and Readiness
2 Chapter 2: Hazard and Risk Identification Methods, JHA, and Controls
Hierarchy of Controls and Construction Risk Logic Job Hazard Analysis and Pre-Task Planning Risk Ranking, Severity, Frequency, and Corrective Action Safety Through Design and Construction Means and Methods PPE Selection, Limitations, and Basic Monitoring Instruments Multi-Trade Coordination, Simultaneous Operations, and Interface Risk Field Observation, Documentation, and Control Verification
3 Chapter 3: High-Hazard Construction Operations I - Fall, Electrical, Excavation, Confined Space, Hot Work, Tools, and Concrete
Working at Heights: Ladders, Scaffolds, and Leading Edge Exposures Fall Protection: Arrest, Restraint, and Rescue Planning Excavation and Trenching: Soil, Protection, and Access/Egress Electrical Hazards: Temporary Power, GFCI, and LOTO Awareness Confined Space Recognition, Atmospheric Testing, and Entry Controls Hot Work: Fire Watch, Combustibles, and Permit Controls Hand and Power Tools, Powder-Actuated Tools, and Concrete Work
4 Chapter 4: High-Hazard Construction Operations II - Struck-By, Equipment, Hoisting, Rigging, Cranes, Material Handling, and Storage
Struck-By, Caught-Between, and Line-of-Fire Controls Mechanized Equipment, Mobile Equipment, and Traffic Control Hoisting, Rigging, Sling Inspection, and Load Control Crane Operations, Critical Lifts, Signaling, and Exclusion Zones Material Handling, Storage, Stacking, and Housekeeping Concrete Placement, Formwork, Rebar, and Impalement Controls Simultaneous Operations, Sequencing, and Stop-Work Decisions
5 Chapter 5: Construction Health, Environmental, Chemical, and Ergonomic Exposure Controls
Silica, Asbestos, Lead, Heavy Metals, and Dust Controls Noise, Vibration, Radiation, and Impact Exposure Control Chemical Exposure, GHS, SDS, and HazCom Field Use Heat, Cold, Extreme Climate, and Biological Hazard Controls Ergonomics, Manual Material Handling, and Work Practice Design Exposure Monitoring, PPE Limitations, and Medical Referral Triggers
6 Chapter 6: Emergency Preparedness, Incident Investigation, and Response
Emergency Action Plans, Site Mitigation, and Evacuation Fire Protection, Prevention, Hot Work, and Alarm Response Environmental Contamination, Spill Response, and Notifications Incident Command, Crisis Management, and Emergency Equipment First Aid, Medical Needs, Bloodborne Pathogens, and Universal Precautions Incident Investigation, Near Misses, Root Cause, and Corrective Action Drills, After-Action Reviews, and Return to Operations
7 Chapter 7: Safety Program Development, Implementation, and Sustainment
Site-Specific Safety Plans and Relevant Program Selection Applying Standards, Regulatory Authority, and Role Boundaries Inspections, Audits, Observations, and Corrective Action Tracking Equipment Manuals, Manufacturer Directives, and Field Compliance Risk Management, Data Gathering, Recordkeeping, and Document Control Incident Causation, Post-Incident Reporting, and Follow-Up Trends, Leading Indicators, and Program Sustainment
8 Chapter 8: Leadership, Communication, Training, and Total Worker Health
Safety Leadership, Credibility, and Field Influence Communication Strategy, Crew Briefings, and Conflict Management Training Needs, Task Analysis, and Adult Learning Delivery Toolbox Talks, Competency Verification, and Documentation Consulting Manufacturers, Suppliers, and Subject Matter Experts Confidentiality, Ethics, Document Control, and Current Information Total Worker Health, At-Risk Behavior, and Risk Reduction Activities
9 Chapter 9: Mixed CHST Construction Case Labs
Fall Protection, Scaffold, and Rescue Case Lab Excavation, Confined Space, and Atmospheric Hazard Case Lab Crane, Rigging, Equipment, and Struck-By Case Lab Hot Work, Fire, and HazCom Case Lab Silica, Noise, Heat, and Health Exposure Case Lab Incident Investigation, Program Failure, and Corrective Action Case Lab Superintendent Meeting, Training, and Stop-Work Case Lab
10 Chapter 10: Standards, References, Ethics, and Field Application
OSHA 1926 Navigation and Construction Standard Application Competent Person, Qualified Person, and Authority Boundaries Consensus Standards, Manufacturer Instructions, and Equipment Manuals BCSP Code of Ethics, Confidentiality, and Professional Conduct Exam-Style Reference Use and Best Answer Strategy
11 Chapter 11: Final Review, High-Yield Tables, and CHST Exam-Day Readiness
Blueprint Quick Reference and Domain Triage High-Yield Construction Hazard Control Tables Emergency Program Leadership and Documentation Review Final Week Practice Plan, Error Log, and Pacing Final 48 Hours, Pearson VUE Test Day, and Retake Planning
Competent Person, Qualified Person, and Authority Boundaries
Key Takeaways Explain This Topic AI
A competent person (per 1926.32(f)) is capable of identifying existing and predictable hazards AND is authorized to take prompt corrective measures; both halves are required.
A qualified person (per 1926.32(m)) possesses a recognized degree, certificate, or professional standing, or by extensive knowledge and experience can solve problems on the subject.
The same employee may be competent for one activity and neither competent nor qualified for another; the roles are task-specific.
Authority boundaries matter: a CHST should know when to stop work, escalate, document, or defer to engineering, manufacturer, or regulatory direction.
Exam questions reward assigning the decision to the correct person rather than to whoever is nearby.
Last updated: June 2026
- Competent Person, Qualified Person, and Authority Boundaries
- Why These Terms Matter
Construction standards use person-based authority because some decisions cannot be made safely by a generic supervisor or a checklist. OSHA defines both terms in 1926.32 . A competent person (1926.32(f)) is "one who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them." A qualified person (1926.32(m)) is "one who, by possession of a recognized degree, certificate, or professional standing, or who by extensive knowledge, training, and experience, has successfully demonstrated his ability to solve or resolve problems relating to the subject matter, the work, or the project." The exam rarely asks for the words verbatim, but it constantly tests whether you route a decision to the right authority level.
These roles are task-specific. A superintendent may be the competent person for excavation inspections yet not qualified to design a complex scaffold, approve crane assembly engineering, or evaluate a damaged fall arrest system. A professional engineer (PE) may be qualified to design a protective system yet not be the on-site competent person who inspects daily and removes workers from danger. Titles do not automatically create authority; the standard's two-part definition does.
Where the Standards Name Each Role
Memorize which subparts demand which person. Competent person is named in Excavations (Subpart P, daily and post-rain inspection), Scaffolds (Subpart L), Fall Protection (Subpart M), Stairways and Ladders (Subpart X), Steel Erection (Subpart R), and Cranes (Subpart CC, for several inspections). Qualified person is named for fall protection system and anchorage design where the 5,000-pound anchor rule is not met, certain scaffold designs, crane assembly/disassembly direction (the A/D director must be both competent and qualified), and engineered shoring. When a scenario mentions designing, calculating, or modifying, lean toward qualified person or engineer; when it mentions inspecting, recognizing, or correcting field conditions, lean toward competent person.
Competent Person in the Field
The competent person is needed where conditions change quickly. The key exam phrase is authority to take prompt corrective action . If a person can identify a hazard but cannot stop work, remove employees, tag equipment, or require escalation, that person may be knowledgeable but is not functioning as the required competent person. Subpart P is the classic trap: the competent person must inspect excavations daily, before each shift, and after every rainstorm or other hazard-increasing event , and must remove workers when hazards appear.
Scenario Correct authority signal Weak answer
Water enters a trench after rain Competent person reinspects per 1926.651 and removes workers if needed Continue because inspection was done at 7 a.m.
Scaffold plank is cracked Competent person tags, removes, or restricts use Let workers decide whether it feels stable
Confined space conditions change Entry supervisor / competent authority revalidates the permit Rely on yesterday's permit
Fall arrest gear arrested a fall Remove from service permanently; competent or manufacturer evaluation Put it back if it looks clean
Crane assembly underway Assembly/disassembly director (competent AND qualified) directs Let the most senior operator wing it
Qualified Person Decisions
Qualified person decisions involve specialized technical judgment: designing scaffold components, engineered excavation protective systems, fall protection anchorage or horizontal lifeline systems, crane assembly or modification issues, and structural support decisions. The qualified person may be an engineer, manufacturer representative, or trained specialist depending on the standard. A common exam trap assigns a design decision to a competent person when the scenario requires a qualified person . Competent persons inspect, recognize, and act within scope; qualified persons solve technical problems within their expertise. Both are often required on the same activity, as when a qualified person designs an anchorage and a competent person verifies workers use it and removes damaged gear.
CHST Authority and Limits
A CHST may recommend controls, conduct inspections, stop unsafe work under company policy, coordinate training, review documents, and escalate issues. But the CHST should not approve a deviation from a standard, alter equipment contrary to a manual, stamp an engineering design, interpret medical restrictions beyond their qualifications, or override an AHJ. Ethical, competent practice includes saying, "This decision requires the competent person, qualified person, manufacturer, engineer, or current standard."
When boundaries are unclear, use a conservative decision path:
Stop or isolate the exposure if workers face immediate risk.
Identify the decision required: inspection, design, operation, medical, environmental, or regulatory interpretation.
Match the decision to the required person or authority.
Document the condition, the person contacted, interim controls, and the final decision.
Communicate the outcome to affected workers before work resumes.
Exam Lens
Scenario answers like "retrain the worker," "tell the foreman," or "proceed under observation" are often incomplete when the standard requires a competent person inspection or qualified person design. The best answer recognizes the role named or implied by the hazard. If a trench changes after rain, choose competent person reinspection. If a scaffold needs custom design, choose qualified person or PE review. If equipment instructions are unclear, consult the manufacturer before modification. If a permit or plan controls the work, follow and update the current plan.
The goal is not to memorize every place these words appear but to apply authority correctly. A CHST protects workers by putting decisions in the hands of people who are authorized, capable, and accountable for that specific hazard. Watch for the distractor that pairs the right person with the wrong scope: competent persons inspect and correct, they do not engineer.