Study guide
Exam-Style Reference Use and Best Answer Strategy
BCSP CHST Construction Health and Safety Technician Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: CHST Exam Orientation and Official Source Control
Official Sources and Credential Purpose Eligibility, Application, Fees, and Character Review Exam Format, Scoring, Beta Questions, and Blueprint Pearson VUE Scheduling, Test Day, Results, and Retakes Blueprint-Based Study Plan and Readiness
2 Chapter 2: Hazard and Risk Identification Methods, JHA, and Controls
Hierarchy of Controls and Construction Risk Logic Job Hazard Analysis and Pre-Task Planning Risk Ranking, Severity, Frequency, and Corrective Action Safety Through Design and Construction Means and Methods PPE Selection, Limitations, and Basic Monitoring Instruments Multi-Trade Coordination, Simultaneous Operations, and Interface Risk Field Observation, Documentation, and Control Verification
3 Chapter 3: High-Hazard Construction Operations I - Fall, Electrical, Excavation, Confined Space, Hot Work, Tools, and Concrete
Working at Heights: Ladders, Scaffolds, and Leading Edge Exposures Fall Protection: Arrest, Restraint, and Rescue Planning Excavation and Trenching: Soil, Protection, and Access/Egress Electrical Hazards: Temporary Power, GFCI, and LOTO Awareness Confined Space Recognition, Atmospheric Testing, and Entry Controls Hot Work: Fire Watch, Combustibles, and Permit Controls Hand and Power Tools, Powder-Actuated Tools, and Concrete Work
4 Chapter 4: High-Hazard Construction Operations II - Struck-By, Equipment, Hoisting, Rigging, Cranes, Material Handling, and Storage
Struck-By, Caught-Between, and Line-of-Fire Controls Mechanized Equipment, Mobile Equipment, and Traffic Control Hoisting, Rigging, Sling Inspection, and Load Control Crane Operations, Critical Lifts, Signaling, and Exclusion Zones Material Handling, Storage, Stacking, and Housekeeping Concrete Placement, Formwork, Rebar, and Impalement Controls Simultaneous Operations, Sequencing, and Stop-Work Decisions
5 Chapter 5: Construction Health, Environmental, Chemical, and Ergonomic Exposure Controls
Silica, Asbestos, Lead, Heavy Metals, and Dust Controls Noise, Vibration, Radiation, and Impact Exposure Control Chemical Exposure, GHS, SDS, and HazCom Field Use Heat, Cold, Extreme Climate, and Biological Hazard Controls Ergonomics, Manual Material Handling, and Work Practice Design Exposure Monitoring, PPE Limitations, and Medical Referral Triggers
6 Chapter 6: Emergency Preparedness, Incident Investigation, and Response
Emergency Action Plans, Site Mitigation, and Evacuation Fire Protection, Prevention, Hot Work, and Alarm Response Environmental Contamination, Spill Response, and Notifications Incident Command, Crisis Management, and Emergency Equipment First Aid, Medical Needs, Bloodborne Pathogens, and Universal Precautions Incident Investigation, Near Misses, Root Cause, and Corrective Action Drills, After-Action Reviews, and Return to Operations
7 Chapter 7: Safety Program Development, Implementation, and Sustainment
Site-Specific Safety Plans and Relevant Program Selection Applying Standards, Regulatory Authority, and Role Boundaries Inspections, Audits, Observations, and Corrective Action Tracking Equipment Manuals, Manufacturer Directives, and Field Compliance Risk Management, Data Gathering, Recordkeeping, and Document Control Incident Causation, Post-Incident Reporting, and Follow-Up Trends, Leading Indicators, and Program Sustainment
8 Chapter 8: Leadership, Communication, Training, and Total Worker Health
Safety Leadership, Credibility, and Field Influence Communication Strategy, Crew Briefings, and Conflict Management Training Needs, Task Analysis, and Adult Learning Delivery Toolbox Talks, Competency Verification, and Documentation Consulting Manufacturers, Suppliers, and Subject Matter Experts Confidentiality, Ethics, Document Control, and Current Information Total Worker Health, At-Risk Behavior, and Risk Reduction Activities
9 Chapter 9: Mixed CHST Construction Case Labs
Fall Protection, Scaffold, and Rescue Case Lab Excavation, Confined Space, and Atmospheric Hazard Case Lab Crane, Rigging, Equipment, and Struck-By Case Lab Hot Work, Fire, and HazCom Case Lab Silica, Noise, Heat, and Health Exposure Case Lab Incident Investigation, Program Failure, and Corrective Action Case Lab Superintendent Meeting, Training, and Stop-Work Case Lab
10 Chapter 10: Standards, References, Ethics, and Field Application
OSHA 1926 Navigation and Construction Standard Application Competent Person, Qualified Person, and Authority Boundaries Consensus Standards, Manufacturer Instructions, and Equipment Manuals BCSP Code of Ethics, Confidentiality, and Professional Conduct Exam-Style Reference Use and Best Answer Strategy
11 Chapter 11: Final Review, High-Yield Tables, and CHST Exam-Day Readiness
Blueprint Quick Reference and Domain Triage High-Yield Construction Hazard Control Tables Emergency Program Leadership and Documentation Review Final Week Practice Plan, Error Log, and Pacing Final 48 Hours, Pearson VUE Test Day, and Retake Planning
Exam-Style Reference Use and Best Answer Strategy
Key Takeaways Explain This Topic AI
The CHST exam is 200 multiple-choice questions delivered at a Pearson VUE / PSI test center; many items test which reference or authority should control the next action.
Scaled scoring with a criterion-referenced cut score means you do not need a perfect paper, but you must reliably choose the safest defensible step.
The best answer usually controls immediate exposure first, then verifies details through the correct standard, plan, competent person, qualified person, manufacturer, SDS, or AHJ.
Match the reference to the question: manuals for equipment, SDSs for chemicals, site plans for planned work, standards for legal requirements, and qualified people for technical decisions.
Avoid choices that rely only on memory, habit, production pressure, generic training, or paperwork while a hazard remains uncontrolled.
Last updated: June 2026
- Exam-Style Reference Use and Best Answer Strategy
- What the Exam Is Really Asking
The CHST examination is 200 multiple-choice questions administered by computer at a third-party testing center (Pearson VUE or PSI, depending on the current BCSP vendor). Scoring is scaled and criterion-referenced : BCSP converts your raw correct answers to a scaled score against a passing standard set by a panel of subject-matter experts, so you do not need a perfect paper, only reliable judgment. Plan your time across the full appointment and do not leave items blank, since there is no penalty for guessing.
Most questions are not asking, "Can you recite a citation?" They ask, "Can you choose the safest defensible next step using the right authority?" A scenario may mention a crane pick, a damaged scaffold, a new chemical, a confined space, hot work, a trench after rain, a fall arrest component, an inspection record, or a contractor dispute. The best answer often depends on recognizing which reference or person controls the decision.
The exam expects applied construction judgment. Know the common OSHA construction topics, but also know when the best answer is to consult the manufacturer, competent person, qualified person, site-specific plan, SDS, hot work permit, lift plan, current standard, or AHJ. Choosing to verify is not weakness; it is how safe work is managed.
The Best Answer Sequence
Use a simple, repeatable sequence for scenario questions:
Identify the immediate hazard and the exposed worker.
Decide whether work must stop, be isolated, or continue under existing controls.
Match the decision to the controlling reference or authority.
Choose the answer that applies controls before paperwork convenience.
Verify, document, and communicate the final decision.
If an answer lets exposed work continue while someone looks up information later, be suspicious. If an answer says to train workers but does not correct a physical hazard, it is likely incomplete. If an answer assigns a specialized design decision to an unqualified person, it is probably wrong. If an answer prefers past practice over current instructions, it is usually wrong.
Align the sequence with the hierarchy of controls : prefer elimination, substitution, and engineering controls over administrative controls and PPE. A distractor that jumps straight to "issue more PPE" when an engineering control is available is often the trap answer.
Match the Reference to the Problem
Different problems need different references. A damaged lanyard points to manufacturer instructions, ANSI Z359 inspection criteria, and removal from service. A new epoxy points to the SDS, label, ventilation, PPE, storage, and HazCom training. A critical lift points to the lift plan, Subpart CC, operator and rigger qualifications, ground conditions, power-line clearance, and supervisor authority. A scaffold modification points to the competent person, a qualified person where design is involved, and the manufacturer's limitations.
- Scenario clue Best reference or authority Likely wrong shortcut
- Unknown chemical exposure SDS, label, exposure controls Guess PPE from odor
- Custom anchor point Qualified person, engineer, manufacturer Use any strong-looking steel
- Trench changed after rain Competent person inspection (1926.651) Rely on the morning checklist
- Hot work near combustibles Permit, fire watch, NFPA 51B / site fire rules Continue because sparks are small
- Conflicting requirements Most protective: current standard, plan, AHJ Choose the easiest rule
Paperwork Is Not Control
Exams frequently bait you with documentation choices. Documentation matters, but it is not the same as control. A completed training roster does not make an unguarded edge safe. A signed lift plan does not help if ground conditions changed and the crane is no longer set up as planned. A confined space permit is void the moment atmosphere, ventilation, work, or entry conditions change, which is why permits require continuous or periodic atmospheric monitoring. Choose answers that revalidate controls when conditions change .
Good documentation follows action. The CHST records inspections, training, permits, deviations, corrective actions, and communications during or after control. But when a worker is currently exposed, the first step is to remove, guard, isolate, ventilate, shore, lock out, barricade, or stop, as appropriate.
Current Standard and Local Control
Watch for signal words such as most current, manufacturer, site-specific, authority having jurisdiction, competent person, or qualified person . They flag that the item tests process and humility more than memory. Current standards matter because rules, interpretations, consensus documents, and equipment instructions change. Site-specific plans matter because a general rule may not address a project's access, sequencing, emergency response, or contract requirement.
Final Exam Habits
Read all four options before choosing. Eliminate answers that ignore exposure, falsify records, exceed authority, use outdated information, punish reporting, or rely on luck. Prefer answers that are specific, preventive, and tied to a recognized authority. When two answers sound reasonable, pick the one that both protects workers now and verifies the controlling requirement before work continues. Manage the clock, flag uncertain items for review, and answer every question. A practical CHST answer sounds like field leadership: stop the unsafe condition, involve the right person, use the right reference, document the result, and communicate the control. That strategy works even when the exact citation is not in your memory.