Study guide
OSHA 1926 Navigation and Construction Standard Application
BCSP CHST Construction Health and Safety Technician Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: CHST Exam Orientation and Official Source Control
Official Sources and Credential Purpose Eligibility, Application, Fees, and Character Review Exam Format, Scoring, Beta Questions, and Blueprint Pearson VUE Scheduling, Test Day, Results, and Retakes Blueprint-Based Study Plan and Readiness
2 Chapter 2: Hazard and Risk Identification Methods, JHA, and Controls
Hierarchy of Controls and Construction Risk Logic Job Hazard Analysis and Pre-Task Planning Risk Ranking, Severity, Frequency, and Corrective Action Safety Through Design and Construction Means and Methods PPE Selection, Limitations, and Basic Monitoring Instruments Multi-Trade Coordination, Simultaneous Operations, and Interface Risk Field Observation, Documentation, and Control Verification
3 Chapter 3: High-Hazard Construction Operations I - Fall, Electrical, Excavation, Confined Space, Hot Work, Tools, and Concrete
Working at Heights: Ladders, Scaffolds, and Leading Edge Exposures Fall Protection: Arrest, Restraint, and Rescue Planning Excavation and Trenching: Soil, Protection, and Access/Egress Electrical Hazards: Temporary Power, GFCI, and LOTO Awareness Confined Space Recognition, Atmospheric Testing, and Entry Controls Hot Work: Fire Watch, Combustibles, and Permit Controls Hand and Power Tools, Powder-Actuated Tools, and Concrete Work
4 Chapter 4: High-Hazard Construction Operations II - Struck-By, Equipment, Hoisting, Rigging, Cranes, Material Handling, and Storage
Struck-By, Caught-Between, and Line-of-Fire Controls Mechanized Equipment, Mobile Equipment, and Traffic Control Hoisting, Rigging, Sling Inspection, and Load Control Crane Operations, Critical Lifts, Signaling, and Exclusion Zones Material Handling, Storage, Stacking, and Housekeeping Concrete Placement, Formwork, Rebar, and Impalement Controls Simultaneous Operations, Sequencing, and Stop-Work Decisions
5 Chapter 5: Construction Health, Environmental, Chemical, and Ergonomic Exposure Controls
Silica, Asbestos, Lead, Heavy Metals, and Dust Controls Noise, Vibration, Radiation, and Impact Exposure Control Chemical Exposure, GHS, SDS, and HazCom Field Use Heat, Cold, Extreme Climate, and Biological Hazard Controls Ergonomics, Manual Material Handling, and Work Practice Design Exposure Monitoring, PPE Limitations, and Medical Referral Triggers
6 Chapter 6: Emergency Preparedness, Incident Investigation, and Response
Emergency Action Plans, Site Mitigation, and Evacuation Fire Protection, Prevention, Hot Work, and Alarm Response Environmental Contamination, Spill Response, and Notifications Incident Command, Crisis Management, and Emergency Equipment First Aid, Medical Needs, Bloodborne Pathogens, and Universal Precautions Incident Investigation, Near Misses, Root Cause, and Corrective Action Drills, After-Action Reviews, and Return to Operations
7 Chapter 7: Safety Program Development, Implementation, and Sustainment
Site-Specific Safety Plans and Relevant Program Selection Applying Standards, Regulatory Authority, and Role Boundaries Inspections, Audits, Observations, and Corrective Action Tracking Equipment Manuals, Manufacturer Directives, and Field Compliance Risk Management, Data Gathering, Recordkeeping, and Document Control Incident Causation, Post-Incident Reporting, and Follow-Up Trends, Leading Indicators, and Program Sustainment
8 Chapter 8: Leadership, Communication, Training, and Total Worker Health
Safety Leadership, Credibility, and Field Influence Communication Strategy, Crew Briefings, and Conflict Management Training Needs, Task Analysis, and Adult Learning Delivery Toolbox Talks, Competency Verification, and Documentation Consulting Manufacturers, Suppliers, and Subject Matter Experts Confidentiality, Ethics, Document Control, and Current Information Total Worker Health, At-Risk Behavior, and Risk Reduction Activities
9 Chapter 9: Mixed CHST Construction Case Labs
Fall Protection, Scaffold, and Rescue Case Lab Excavation, Confined Space, and Atmospheric Hazard Case Lab Crane, Rigging, Equipment, and Struck-By Case Lab Hot Work, Fire, and HazCom Case Lab Silica, Noise, Heat, and Health Exposure Case Lab Incident Investigation, Program Failure, and Corrective Action Case Lab Superintendent Meeting, Training, and Stop-Work Case Lab
10 Chapter 10: Standards, References, Ethics, and Field Application
OSHA 1926 Navigation and Construction Standard Application Competent Person, Qualified Person, and Authority Boundaries Consensus Standards, Manufacturer Instructions, and Equipment Manuals BCSP Code of Ethics, Confidentiality, and Professional Conduct Exam-Style Reference Use and Best Answer Strategy
11 Chapter 11: Final Review, High-Yield Tables, and CHST Exam-Day Readiness
Blueprint Quick Reference and Domain Triage High-Yield Construction Hazard Control Tables Emergency Program Leadership and Documentation Review Final Week Practice Plan, Error Log, and Pacing Final 48 Hours, Pearson VUE Test Day, and Retake Planning
OSHA 1926 Navigation and Construction Standard Application
Key Takeaways Explain This Topic AI
29 CFR 1926 (Safety and Health Regulations for Construction) is organized into lettered subparts; the Construction Health and Safety Technician (CHST) navigates by subpart and hazard, not by memorizing paragraph numbers.
Know the high-frequency subparts: L scaffolds, M fall protection (1926.501 trigger height 6 feet), P excavations (1926.651/.652), CC cranes, K electrical, and X stairways and ladders.
Construction work is evaluated under 1926, but general industry 1910 requirements interface through HazCom, recordkeeping, respiratory protection, and chemical exposure.
A field answer starts with the applicable standard, then weighs site condition, exposure, employer role, and required competent or qualified person involvement.
When a question turns on exact wording, current OSHA text, a Letter of Interpretation, or an incorporated reference governs the answer rather than memory.
Last updated: June 2026
- OSHA 1926 Navigation and Construction Standard Application
- Know the Map Before the Citation
29 CFR 1926 (Safety and Health Regulations for Construction) is the CHST candidate's home reference. You do not memorize every paragraph, but you must know how it is organized so you can find the controlling rule fast. The regulation is divided into lettered subparts , and the CHST exam blueprint (CHST5) weights its content domains around this structure. The highest-yield subparts to recognize on sight are: Subpart C (general safety and health provisions, including competent person duties), Subpart D (occupational health and environmental controls), Subpart E (personal protective equipment, PPE), Subpart K (electrical), Subpart L (scaffolds), Subpart M (fall protection), Subpart P (excavations), Subpart X (stairways and ladders), and Subpart CC (cranes and derricks).
Anchor the Numbers You Will See Repeatedly
A few exact citations recur often enough that they belong in long-term memory. 1926.501 sets the 6-foot fall protection trigger for most construction surfaces (steel erection uses 15 feet under Subpart R, and scaffolds use 10 feet under Subpart L). 1926.451 governs scaffold capacity at 4 times the maximum intended load . 1926.651 and .652 require a competent person to classify soil and select a protective system for excavations 5 feet or deeper (and to evaluate any excavation regardless of depth where a hazard exists). 1926.1053 requires ladder side rails to extend 3 feet above a landing. Recognizing these anchors lets you eliminate distractors that quote the wrong trigger height.
Construction First, Interfaces Second
Construction work is normally evaluated under 1926, but jobsites constantly touch 29 CFR 1910 general industry rules. Hazard Communication, for example, is pulled into construction by 1926.59 , which adopts the 1910.1200 standard. Injury and illness recordkeeping ( 1904 ), respiratory protection program elements (1910.134, referenced through 1926.103), powered industrial truck operations, energy control during maintenance interfaces, and many chemical-specific standards (lead at 1926.62, asbestos at 1926.1101, silica at 1926.1153) all cross the line. For exam purposes, do not assume one book excludes the other. Ask whether the activity is construction work, whether a 1926 standard directly addresses it, and whether a 1910-rooted program requirement also applies.
Situation Primary navigation question Controlling subpart Practical CHST action
Worker near unprotected edge at 7 ft Which fall protection rule applies? Subpart M, 1926.501 Verify 6-ft trigger, protection method, training, inspection
Solvent used in enclosed area What does the SDS and HazCom require? 1926.59 / 1910.1200 Check label, SDS, ventilation, PPE, exposure controls
Scaffold altered by crew Who may alter or approve this scaffold? Subpart L, 1926.451/.454 Stop use until competent person inspects
Trench at 6 ft in Type C soil What protective system is required? Subpart P, 1926.652 Slope to 1.5:1, shore, or shield; competent person inspects daily
Crane lift near power lines What clearance and plan controls apply? Subpart CC, 1926.1408 Maintain minimum approach distance, lift plan, qualified operator
Apply Standards to Conditions
A standard is applied to a worker, a hazard, an employer duty, and a specific task, never in the abstract. If workers face a trench collapse hazard, a paper checklist is not enough: a competent person must inspect daily and after every rainstorm, classify the soil, select an appropriate protective system, and remove workers when conditions deteriorate. If fall arrest gear is present but the anchor is not rated for 5,000 pounds per person (or designed by a qualified person to a 2:1 safety factor) and workers are untrained, the mere presence of equipment does not solve the hazard.
Documentation should prove controls are managed: inspection forms, training rosters, Job Hazard Analyses (JHAs), permits, lift plans, confined space permits, and excavation logs are useful when current, specific, and tied to the work. They are weak when generic, unsigned, missing conditions, or contradicted by field observation.
Use Current Text for Exact Requirements
The CHST is not a law-library test, but exact thresholds matter in practice. If a scenario turns on a frequency, definition, exception, or incorporated reference (OSHA pulls in consensus standards by reference at 1926.6), the safest professional answer is to consult the current standard, a Letter of Interpretation , the manufacturer instruction, or the site-specific plan before authorizing work. Construction projects also layer state plan rules (about 22 states run OSHA-approved state plans that may be more stringent), owner specifications, contract requirements, and local fire codes on top of the federal floor. When two requirements conflict, choose the more protective one and escalate to the appropriate safety manager, competent person, qualified person, design professional, or authority having jurisdiction (AHJ) rather than picking the easier rule.
Exam Lens
Work OSHA navigation questions in this order:
Identify the work activity and the exposed employee.
Decide whether 29 CFR 1926 directly addresses the activity, and which subpart.
Check whether a 1910-rooted program or chemical rule interfaces.
Look for required inspections, training, competent person decisions, permits, and documentation.
Choose the answer that controls the hazard now and verifies exact wording from the current source.
The safest candidate avoids both extremes: pretending to memorize every CFR number, and ignoring standards until after an incident. Standards are field tools. Use them before the work exposes people to harm.