Study guide
9.1 ADDIE and the Systematic Approach to Training
BCSP CIT Certified Instructional Trainer Study Guide 2026
Track your progress as you read
Finished sections get a check mark.
1 Credential and Training Standards
1.1 BCSP CIT Credential Scope, Exam Logistics & Recertification 1.2 ANSI/ASSP Z490 Criteria for Accepted EHS Training Practices
2 Adult Learning and Learning Access
2.1 Foundations of Andragogy: Knowles' Adult Learning Assumptions in Safety 2.2 Learner Literacy, ESL Accommodations & Plain Language Compliance 2.3 Opening a Course: Administrative Items and Learning Expectations
3 Communication and Facilitation
3.1 Verbal & Nonverbal Facilitation Techniques in Safety Training 3.2 Active Listening, Socratic Questioning & Teach-Back Verification 3.3 Feedback Frameworks, Corrective Coaching & Psychological Safety
4 Conflict and Instructional Technology
4.1 Managing Challenging Classroom Dynamics, Resistance & Conflict 4.2 Instructional Media, Presentation Tools & Technology Contingencies
5 Performance Needs and Existing Training
5.1 Performance Gaps and Training Necessity 5.2 Evaluating Existing Training and Interventions
6 Organizational, Task and Hazard Analysis
6.1 Organizational and Job Task Analysis 6.2 Hazard Analysis, KSAs and Task Evidence
7 Audience, Baseline and Prerequisites
7.1 Defining the Audience and Its Learning Needs 7.2 Baseline Knowledge and Prior-Learning Credit 7.3 Verifying Prerequisites and Readiness for Training
8 Applicable Training Requirements
8.1 OSHA Training Frameworks, General Duty Clause & Consensus Standards 8.2 Mandated Safety Programs: Lockout/Tagout, Confined Space & Fall Protection 8.3 Chemical & Biological Hazards: HazCom, Bloodborne & Respiratory Protection
9 Systematic and Iterative Design
9.1 ADDIE and the Systematic Approach to Training 9.2 SAM, Agile Development and Prototypes
10 Objectives and Learning Outcomes
10.1 Writing Observable ABCD Objectives 10.2 SMART, Objective Hierarchies and Stakeholder Consensus
11 Learning Domains and Practice
11.1 Cognitive Learning and Revised Bloom Taxonomy 11.2 Psychomotor, Affective and Constructive Alignment 11.3 Experiential Learning Cycles (Kolb), Adult Discovery & Instructional Scaffolding
12 Delivery Choices and Program Economics
12.1 Modality Matrix: Classroom ILT, E-Learning, Microlearning, Hands-On & OJT 12.2 Cost Classification and Worked Budgets 12.3 Resource Feasibility and Cost-Benefit Decisions
13 Developing and Validating Course Components
13.1 Lesson Plan Architecture: Components of Comprehensive Trainer & Participant Guides 13.2 Job Aids and Performance Support 13.3 SME Selection, Credible Sources and Validation
14 Development Planning and External Providers
14.1 Implementing the Instructional Development Plan 14.2 Deciding When and How to Outsource Development
15 Pilots and Recoverable Records
15.1 Representative Pilots and Course Revision 15.2 Record Retention, Privacy and Recovery
16 Implementation Environments and Logistics
16.1 Physical Classroom Design, Seating Arrangements, Ergonomics & Environmental Controls 16.2 Field, Shop & Hands-On Training: Safety Briefings, PPE Verification & Live Demonstration Safety 16.3 Virtual Instructor-Led Training (VILT), Technical Contingency Planning & Remote Engagement 16.4 Scheduling, Logistics and Course Time Management
17 Assessment and Remediation
17.1 Formative and Summative Assessment Tools 17.2 Assessment Criteria, Alignment and Remediation
18 Items, Performance and Standards
18.1 Writing Clear Items and Plausible Distractors 18.2 Item Analysis and Assessment Data 18.3 Performance Checklists and Evaluator Calibration 18.4 Standard Setting and the Angoff Calculation
19 Evaluation Models, Surveys and Learning Data
19.1 Evaluation Models and Feedback Surveys 19.2 Learning Outcomes and Evaluation Data
20 Transfer and Behavior Evidence
20.1 Transfer of Learning and Work Conditions 20.2 Behavior Observations and Change Reporting
21 Results, ROI and Improvement Reports
21.1 Organizational Results and Causal Limits 21.2 ROI, Course Improvement and Training Reports
9.1 ADDIE and the Systematic Approach to Training
Key Takeaways Explain This Topic AI
ADDIE organizes analysis, design, development, implementation and evaluation with feedback.
SAT traces job requirements through objectives, materials and performance evidence.
Neither framework inherently requires evaluation only after delivery.
Last updated: October 2026
Instructional Systems Design Frameworks: ADDIE, SAM & Agile Development
Instructional Systems Design (ISD) provides the structural architecture for developing defensible, effective, and verifiable occupational safety training. In high-hazard industrial environments, training cannot rely on unstructured presentations or ad-hoc demonstrations. When workers encounter toxic atmospheres, high-voltage equipment, or complex rigging systems, instructional deficiencies translate directly into catastrophic workplace injuries, fatalities, and severe regulatory liability. Professional safety educators employ formalized ISD frameworks to translate raw technical regulations, job hazard analyses, and standard operating procedures into targeted, learner-centered educational interventions.
Historically rooted in military and systems engineering methodologies, ISD establishes a closed-loop system where learner needs drive course architecture, instructional strategies govern content delivery, and empirical assessment data fuels continuous curriculum revision. Modern safety professionals primarily navigate between two fundamental design philosophies: the structured, linear discipline of the waterfall ADDIE framework and the dynamic, iterative flexibility of agile models such as Allen's Successive Approximation Model (SAM) .
ADDIE: connected phases with feedback
ADDIE names Analysis, Design, Development, Implementation and Evaluation. These phases organize decisions and deliverables; ADDIE does not inherently require a rigid waterfall, a mandatory sign-off after every phase or evaluation only at the end. Iteration can occur whenever evidence calls for it. +-------------+ +-------------+ +---------------+ +------------------+ +----------------+
- | ANALYSIS | --> | DESIGN | --> | DEVELOPMENT | --> | IMPLEMENTATION | --> | EVALUATION |
- | Gap & JTA | | Blueprint | | Materials | | Delivery & TTT | | Form. & Summ. |
- +-------------+ +-------------+ +---------------+ +------------------+ +----------------+
- ^ |
- +--------------------------------- Continuous Feedback Loop ---------------------------+
- Phase 1: Analysis (Deconstructing the Safety Gap)
The Analysis phase establishes the empirical foundation of the course. Rather than assuming training is the universal remedy for workplace non-compliance, the designer investigates whether performance deficits stem from deficient knowledge/skills, flawed tools, environmental obstacles, or conflicting incentive structures. Core analytical tasks include:
Needs Assessment : Determining whether a bona fide training need exists or if engineering/administrative controls are warranted.
Job-Task Analysis (JTA) : Systematically deconstructing hazardous occupations into duty areas, discrete tasks, critical steps, and safety-critical decision points.
Target Audience Profiling : Evaluating baseline literacy, language diversity, prior trade experience, physical capabilities, and digital competency.
Contextual and Environmental Analysis : Evaluating physical training constraints, regulatory compliance mandates, field equipment availability, and organizational safety culture.
Phase 2: Design (Architecting the Learning Blueprint)
In the Design phase, analytical findings are synthesized into an executable instructional architecture. No actual slide decks or student manuals are authored at this stage; instead, the designer engineers the pedagogical skeleton:
Writing measurable Terminal Learning Objectives (TLOs) and Enabling Learning Objectives (ELOs) .
Developing a criterion-referenced assessment strategy directly tied to behavioral performance standards.
Structuring course sequencing (e.g., simple-to-complex, chronological job-step, or risk-prioritized).
Authoring detailed Course Design Documents (CDDs) , lesson blueprints, and instructional storyboards.
Phase 3: Development (Courseware Authoring and Pilot Testing)
The Development phase generates the tangible physical and digital artifacts of instruction. Drawing directly from the Design blueprint, instructional developers produce:
Facilitator guides with comprehensive instructional scripts, timing cues, and safety briefing protocols.
Trainee workbooks, field job aids, standard operating procedure (SOP) quick-reference cards, and technical handouts.
Audio-visual assets, slide presentations, interactive multimedia, and virtual reality (VR) or equipment simulations.
Formative pilot testing with a representative cohort of front-line workers and subject matter experts (SMEs) to calibrate time allocations, resolve technical discrepancies, and eliminate confusing instructions.
Phase 4: Implementation (Delivery, Logistics, and Train-the-Trainer)
Implementation operationalizes the validated courseware into live operational environments. Success hinges upon operational logistics and instructional consistency:
Conducting formal Train-the-Trainer (TTT) sessions to ensure multi-site adjunct instructors adhere strictly to validated lesson plans and safety standards.
Managing environmental logistics, including classroom ventilation, field demonstration areas, personal protective equipment (PPE) staging, and emergency response readiness.
Publishing digital curricula to Learning Management Systems (LMS) and verifying automated SCORM/xAPI record-keeping compliance.
Delivering the instructional event while maintaining real-time fidelity to safety demonstration guidelines.
Phase 5: Evaluation (Formative, Summative, and Continuous Improvement)
While positioned as the final phase in linear diagrams, modern ISD treats evaluation as a ubiquitous, continuous mechanism that informs every stage. Evaluation encompasses two primary types:
Formative Evaluation : Ongoing diagnostic checks executed during the Analysis, Design, Development, and Implementation phases (e.g., SME content reviews, usability pilot tests, mid-course knowledge checks) to correct deficiencies prior to final rollout.
Summative Evaluation : Post-instructional measurement to determine curriculum effectiveness, behavioral transfer to hazardous jobs, and organizational impact. Instructional trainers universally structure summative evaluations around Donald Kirkpatrick's Four-Level Model (Level 1: Reaction; Level 2: Learning; Level 3: Behavior; Level 4: Results) and Jack Phillips' Level 5 Return on Investment (ROI).
ADDIE Deliverable Architecture in Safety Curricula
Use phase deliverables to trace a performance need through objectives, materials, delivery and evaluation. Exact approval gates depend on the organization and applicable requirements; they are not universal requirements attributed here to an unread standard clause.
- Phase Main decision Example deliverable
- Analysis What performance and learner need exists? Needs and task record
- Design What outcome, practice and evidence are needed? Objective and assessment plan
- Development Do the components work correctly? Validated materials and pilot findings
- Implementation Can the course be delivered as intended? Ready instructors, resources and records
- Evaluation What does the evidence show and what should change? Findings and improvement decisions
- SAT and traceability
The systematic approach to training (SAT) connects job requirements with analysis, design, development, implementation and evaluation. The Department of Energy's training handbook describes these as interrelated phases and explicitly identifies its handbook as guidance rather than a source of new requirements. SAT helps a team retain a trace from the job task through learning objectives and performance evidence. The names of the phases resemble ADDIE; neither acronym substitutes for actually performing the analysis.
A change in a job task can therefore trigger review of the affected objective, materials, practice, assessment and instructor preparation. Maintain the links so that revisions are systematic. DOE SAT handbook .
Key takeaways
ADDIE organizes analysis, design, development, implementation and evaluation with feedback.
SAT traces job requirements through objectives, materials and performance evidence.
Neither framework inherently requires evaluation only after delivery.