Study guide
6.2 Hazard Analysis, KSAs and Task Evidence
BCSP CIT Certified Instructional Trainer Study Guide 2026
Track your progress as you read
Finished sections get a check mark.
1 Credential and Training Standards
1.1 BCSP CIT Credential Scope, Exam Logistics & Recertification 1.2 ANSI/ASSP Z490 Criteria for Accepted EHS Training Practices
2 Adult Learning and Learning Access
2.1 Foundations of Andragogy: Knowles' Adult Learning Assumptions in Safety 2.2 Learner Literacy, ESL Accommodations & Plain Language Compliance 2.3 Opening a Course: Administrative Items and Learning Expectations
3 Communication and Facilitation
3.1 Verbal & Nonverbal Facilitation Techniques in Safety Training 3.2 Active Listening, Socratic Questioning & Teach-Back Verification 3.3 Feedback Frameworks, Corrective Coaching & Psychological Safety
4 Conflict and Instructional Technology
4.1 Managing Challenging Classroom Dynamics, Resistance & Conflict 4.2 Instructional Media, Presentation Tools & Technology Contingencies
5 Performance Needs and Existing Training
5.1 Performance Gaps and Training Necessity 5.2 Evaluating Existing Training and Interventions
6 Organizational, Task and Hazard Analysis
6.1 Organizational and Job Task Analysis 6.2 Hazard Analysis, KSAs and Task Evidence
7 Audience, Baseline and Prerequisites
7.1 Defining the Audience and Its Learning Needs 7.2 Baseline Knowledge and Prior-Learning Credit 7.3 Verifying Prerequisites and Readiness for Training
8 Applicable Training Requirements
8.1 OSHA Training Frameworks, General Duty Clause & Consensus Standards 8.2 Mandated Safety Programs: Lockout/Tagout, Confined Space & Fall Protection 8.3 Chemical & Biological Hazards: HazCom, Bloodborne & Respiratory Protection
9 Systematic and Iterative Design
9.1 ADDIE and the Systematic Approach to Training 9.2 SAM, Agile Development and Prototypes
10 Objectives and Learning Outcomes
10.1 Writing Observable ABCD Objectives 10.2 SMART, Objective Hierarchies and Stakeholder Consensus
11 Learning Domains and Practice
11.1 Cognitive Learning and Revised Bloom Taxonomy 11.2 Psychomotor, Affective and Constructive Alignment 11.3 Experiential Learning Cycles (Kolb), Adult Discovery & Instructional Scaffolding
12 Delivery Choices and Program Economics
12.1 Modality Matrix: Classroom ILT, E-Learning, Microlearning, Hands-On & OJT 12.2 Cost Classification and Worked Budgets 12.3 Resource Feasibility and Cost-Benefit Decisions
13 Developing and Validating Course Components
13.1 Lesson Plan Architecture: Components of Comprehensive Trainer & Participant Guides 13.2 Job Aids and Performance Support 13.3 SME Selection, Credible Sources and Validation
14 Development Planning and External Providers
14.1 Implementing the Instructional Development Plan 14.2 Deciding When and How to Outsource Development
15 Pilots and Recoverable Records
15.1 Representative Pilots and Course Revision 15.2 Record Retention, Privacy and Recovery
16 Implementation Environments and Logistics
16.1 Physical Classroom Design, Seating Arrangements, Ergonomics & Environmental Controls 16.2 Field, Shop & Hands-On Training: Safety Briefings, PPE Verification & Live Demonstration Safety 16.3 Virtual Instructor-Led Training (VILT), Technical Contingency Planning & Remote Engagement 16.4 Scheduling, Logistics and Course Time Management
17 Assessment and Remediation
17.1 Formative and Summative Assessment Tools 17.2 Assessment Criteria, Alignment and Remediation
18 Items, Performance and Standards
18.1 Writing Clear Items and Plausible Distractors 18.2 Item Analysis and Assessment Data 18.3 Performance Checklists and Evaluator Calibration 18.4 Standard Setting and the Angoff Calculation
19 Evaluation Models, Surveys and Learning Data
19.1 Evaluation Models and Feedback Surveys 19.2 Learning Outcomes and Evaluation Data
20 Transfer and Behavior Evidence
20.1 Transfer of Learning and Work Conditions 20.2 Behavior Observations and Change Reporting
21 Results, ROI and Improvement Reports
21.1 Organizational Results and Causal Limits 21.2 ROI, Course Improvement and Training Reports
6.2 Hazard Analysis, KSAs and Task Evidence
Key Takeaways Explain This Topic AI
Job hazard analysis connects task steps with hazards and approved controls.
Knowledge, skills and abilities are not synonyms for the three learning domains.
Validate observed work against approved requirements before teaching it.
Last updated: October 2026
Integrating Job Hazard Analysis (JHA / JSA)
While a JTA identifies what tasks must be completed, a Job Hazard Analysis (JHA) —also known as a Job Safety Analysis (JSA) —systematically analyzes each task step to identify potential physical, chemical, biological, ergonomic, and environmental hazards, establishing the specific controls necessary to mitigate those risks.
Integrating JHA findings into the training curriculum ensures that safety is not treated as an abstract, separate topic, but is woven directly into every step of procedural instruction. The trainer uses the JHA to formulate specific, observable safety learning outcomes based on the Hierarchy of Controls (Elimination, Substitution, Engineering Controls, Administrative Controls, and Personal Protective Equipment).
JHA-to-training example: a nonhazardous inspection simulator
This illustrative task uses tagged, inert equipment specimens. The technical reviewer supplies the inspection criteria; the table demonstrates analysis structure rather than live operating instructions.
Task step Potential problem Training response Required evidence
Select the specimen and reference Wrong model or obsolete criteria Practice checking identification and revision Learner selects the matching reference
Inspect specified features A feature is skipped Demonstrate an organized inspection sequence Learner checks every required feature
Decide status Damage is misinterpreted Compare approved examples and decision rules Learner identifies the correct disposition
Report the result Ambiguous or missing record Practice a complete report Another person can identify the item and action
The KSA Taxonomy in Safety Instruction
Knowledge is information and understanding needed for the task. Skills are learned proficiencies demonstrated through performance. Abilities are capacities that support performance, including cognitive or physical capacities. They are not synonyms for cognitive, psychomotor and affective learning domains. An inspection task may require knowledge of criteria, skill in systematic inspection and the ability to distinguish relevant features; attitudes toward reporting are a separate instructional consideration.
Protocols for Working with Subject Matter Experts (SMEs) and Observing Tasks
Safety trainers rarely possess deep, day-to-day operational mastery across every technical trade in an enterprise. Consequently, conducting an authentic JTA/JHA requires partnering with frontline Subject Matter Experts (SMEs) .
Important
When conducting task observations and SME interviews, instructional designers must distinguish between Work-as-Imagined (the official, sanitized standard operating procedure documented in corporate manuals) and Work-as-Done (the actual, real-world behaviors and informal adaptations frontline workers use to overcome operational friction).
Key protocols for effective data gathering:
Engage Frontline Operators, Not Just Supervisors: While supervisors understand company policy, tenured operators understand the daily realities of equipment wear, tool availability, and operational workarounds.
Conduct Cognitive Walkthroughs: Have the worker perform the task while "thinking aloud," explaining what visual, auditory, and tactile cues they use to judge whether a machine is running safely or when a process parameter is drifting out of specification.
Overcome the Expert Blind Spot: Highly experienced SMEs have automated their safety checks into unconscious habit. They often forget to mention critical sub-steps because "everyone just knows that." The trainer must prompt the SME with probing questions: "What did you look at right before you flipped that valve?"
Triangulate Data Across Shifts and Experience Levels: Observe novice, intermediate, and veteran workers across day and night shifts. Comparing their behaviors reveals which procedural steps are truly essential and where training must provide specific scaffolding.
Turning task evidence into teachable requirements
Trace each proposed learning requirement back to a task. Ask the subject matter expert what a successful worker notices, decides and does at that point. A task list saying "inspect equipment" is too broad to reveal the learner's needs. Observation may show that the worker first checks the model, selects a reference, examines defined features, interprets findings and communicates the disposition. Those actions produce more useful objectives than copying a job description verbatim.
Distinguish prerequisites from content to be taught. Reading a supplied table may be an entry skill, while interpreting the equipment-specific criteria may be the course's purpose. If the entry skill is absent, plan preparatory support rather than confusing it with failure of the target task. Also distinguish a person's ability to perform a task from willingness and opportunity to do it.
For an inspection simulator, validate the observations with more than one appropriate source: the approved reference, an experienced performer and the technical owner. Differences can expose an undocumented shortcut or an ambiguous instruction. Do not turn a common shortcut into the training standard merely because experienced workers use it.
The resulting task record should identify the action, conditions, required knowledge or skill, hazards and controls, evidence criterion and source. It can then support design, development and assessment. If a task changes, this trace lets the team locate affected lessons and checks. An untraceable slide deck is much harder to maintain.
Key takeaways
Job hazard analysis connects task steps with hazards and approved controls.
Knowledge, skills and abilities are not synonyms for the three learning domains.
Validate observed work against approved requirements before teaching it.