Study guide

Fire Extinguisher Types & PASS Method

Alberta Basic Security Training ABST

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

About the ABST Exam The SSIA and Alberta Security Licensing Study Plan & Exam Strategy

2 Module 1: Introduction to the Security Industry

1.1 Roles & Responsibilities of a Security Professional 1.2 Protection of Persons, Property & Information 1.3 SSIA Key Provisions & Licensing Requirements 1.4 Professional Conduct, Appearance & Deportment 1.5 Public Complaints & Disciplinary Process 1.6 The Security Industry in Alberta

3 Module 2A: Canadian Legal System Foundations

2A.1 Canadian Legal System Overview 2A.2 Charter of Rights & Freedoms (Legal Rights) 2A.3 Criminal Code Basics for Security 2A.4 Summary, Indictable & Hybrid Offences 2A.5 Search & Seizure Provisions

4 Module 2B: Powers & Authority

Citizen's Power of Arrest (s. 494) Use of Force (ss. 25, 26, 27) Trespass & Property Offences Theft, Loss Prevention & Shoplifting Powers Other Relevant Legislation

5 Module 3A: Patrol & Observation

Observation Skills Foot & Vehicle Patrol Procedures Access Control Surveillance, CCTV & Alarm Monitoring

6 Module 3B: Site Operations

Crowd Control Dealing with Substance Abusers & Drug Paraphernalia Interacting with the Media Traffic Control Procedures & Signals Post Orders, Shift Management & Working with a Partner Use of Force Response & Excited Delirium

7 Module 4: Communication

Verbal & Non-Verbal Communication Active Listening Skills The LEAPS Communication Method Communication Challenges & Bias Awareness Handling Hostile, Violent & Intoxicated Persons Conducting Interviews & Statement Taking

8 Module 5A: Documentation

Notebook Maintenance & Legal Implications 24-Hour Clock & Phonetic Alphabet Report Writing (Shift, Incident & Traffic Collision) Mandatory Reports to the Registrar

9 Module 5B: Evidence & Court

Types of Evidence Crime Scene Preservation Preparing for & Testifying in Court

10 Module 6A: Alarm Systems

Alarm Systems & Components Types of Alarm Sensors Responding to Alarms & Off-Site Response

11 Module 6B: Fire, Bomb & Evacuation

Fire Emergency Management Fire Extinguisher Types & PASS Method Bomb Threat Procedures & Checklist Evacuation Procedures

12 Module 7: Health & Safety

Personal Safety Practices Risk Assessment (Low, Medium, High) Identifying Workplace Hazards Emergency Response Safety Shift Work Effects on Health & Wellbeing Managing Shift Work Challenges

Fire Extinguisher Types & PASS Method

Key Takeaways Explain This Topic AI

Extinguisher types are matched to fire classes: water for A, foam for A/B, CO2 for B/C (and A), dry chemical ABC for multipurpose, wet chemical for K — and using the wrong type is dangerous

Applying water to an electrical (Class C) or flammable-liquid (Class B) fire can spread the fire, electrocute the operator, or cause a flash

PASS stands for Pull, Aim, Squeeze, Sweep — pull the pin, aim at the base of the fire, squeeze the handle, sweep side to side

Only attempt to fight a fire that is small, contained, in its early stage, and when you have a clear, unobstructed escape route

Inspect extinguishers on patrol: check the gauge is in the green, the seal is intact, the label is legible, and the unit is in its marked location

Last updated: August 2026

Matching Extinguishers to Fire Classes

A fire extinguisher is not a universal tool. Each type is engineered for specific fire classes. Using the wrong one can be worse than using none at all.

Extinguisher Type Effective On How It Works Cautions

Water (APW) Class A Cools the fuel below ignition temperature Never on electrical (shock) or flammable-liquid (spreads) fires

Foam (AFFF) Class A and B Forms a blanket that smothers and cools Not for energized electrical

CO2 Class B and C (also rated A) Displaces oxygen and cools; leaves no residue Limited range; ineffective outdoors in wind

Dry Chemical (ABC) Class A, B, and C Interrupts the chemical chain reaction + smothers Multipurpose; most common in commercial sites

Wet Chemical Class K Saponifies cooking oil, seals the surface Commercial kitchens only; not for electrical or ordinary combustibles

Class D Dry Powder Class D only Coats the metal and excludes oxygen Specifically for combustible-metal fires; never use other agents on Class D

The most common extinguisher on a typical commercial site is the ABC dry chemical — a multipurpose unit that handles ordinary combustibles, flammable liquids, and energized electrical fires. You should still verify the label on the unit before using it, because some sites stock Class K units in kitchens and Class D units in labs or workshops where they would not otherwise be expected.

The Danger of the Wrong Type

The single most important rule of extinguisher use: read the label and match the class before you act.

Water on a Class C (electrical) fire — the water conducts electricity. You can be electrocuted, and the current can travel through the stream back to you.

Water on a Class B (flammable liquid) fire — water is heavier than most flammable liquids. It sinks, the liquid floats up and spreads, and the fire expands across the floor.

CO2 on a Class D (combustible metal) fire — some metals react violently with CO2, decomposing it and releasing oxygen that feeds the fire.

ABC dry chemical on a Class D fire — standard dry chemical is not rated for metal fires and can cause a violent reaction.

When in doubt, do not fight the fire. Evacuate and let the fire department handle it.

The PASS Method

The PASS method is the universally taught technique for operating a portable fire extinguisher. The acronym stands for P ull, A im, S queeze, S weep.

Loading diagram...

The Four Steps in Detail

Pull the pin — this breaks the tamper seal and unlocks the operating handle. Some units have a small zip-tie-style seal instead of a pin; pull firmly.

Aim at the base of the fire — the flames are the symptom; the burning fuel is the source. Aiming at the flames wastes agent and does nothing.

Squeeze the handle — this releases the extinguishing agent. Release the handle to stop the flow.

Sweep from side to side — cover the entire fuel surface until the fire is out, then watch the area for re-ignition . Back away while facing the fire; never turn your back on a fire you just put out.

A typical portable extinguisher discharges in 8 to 15 seconds . That is the entire window you have. If the fire is not out when the extinguisher empties, evacuate.

When to Fight and When to Evacuate

Before you even pull the pin, run this checklist:

Is the fire small and contained to its origin (a wastebasket, a single appliance)?

Is the fire in its early stage (just started, not spreading rapidly)?

Do I have the correct extinguisher class for this fuel?

Do I have a clear, unobstructed escape route behind me?

Is the air safe to breathe — no heavy smoke, no toxic fumes between me and the fire?

Has the alarm already been raised and the fire department called?

If you cannot answer yes to all of these , do not fight the fire. Evacuate, close doors behind you to limit oxygen, and let the professionals handle suppression. Property can be replaced; your life cannot.

Inspecting Extinguishers on Patrol

Extinguishers are part of your patrol inspection. On each round, confirm:

The pressure gauge needle sits in the green zone (charged). A needle in the red means the unit is under- or over-pressured and must be serviced.

The tamper seal is intact. A broken seal may mean the unit was used and not refilled.

The label is legible — class rating and operating instructions are readable.

The unit is in its marked location , visible and accessible (not blocked by boxes or equipment).

The nozzle and hose are undamaged and unobstructed.

Log any deficiency and report it to your supervisor immediately. A missing or discharged extinguisher is a life-safety issue, not a paperwork problem.