Study guide

Traffic Control Procedures & Signals

Alberta Basic Security Training ABST

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

About the ABST Exam The SSIA and Alberta Security Licensing Study Plan & Exam Strategy

2 Module 1: Introduction to the Security Industry

1.1 Roles & Responsibilities of a Security Professional 1.2 Protection of Persons, Property & Information 1.3 SSIA Key Provisions & Licensing Requirements 1.4 Professional Conduct, Appearance & Deportment 1.5 Public Complaints & Disciplinary Process 1.6 The Security Industry in Alberta

3 Module 2A: Canadian Legal System Foundations

2A.1 Canadian Legal System Overview 2A.2 Charter of Rights & Freedoms (Legal Rights) 2A.3 Criminal Code Basics for Security 2A.4 Summary, Indictable & Hybrid Offences 2A.5 Search & Seizure Provisions

4 Module 2B: Powers & Authority

Citizen's Power of Arrest (s. 494) Use of Force (ss. 25, 26, 27) Trespass & Property Offences Theft, Loss Prevention & Shoplifting Powers Other Relevant Legislation

5 Module 3A: Patrol & Observation

Observation Skills Foot & Vehicle Patrol Procedures Access Control Surveillance, CCTV & Alarm Monitoring

6 Module 3B: Site Operations

Crowd Control Dealing with Substance Abusers & Drug Paraphernalia Interacting with the Media Traffic Control Procedures & Signals Post Orders, Shift Management & Working with a Partner Use of Force Response & Excited Delirium

7 Module 4: Communication

Verbal & Non-Verbal Communication Active Listening Skills The LEAPS Communication Method Communication Challenges & Bias Awareness Handling Hostile, Violent & Intoxicated Persons Conducting Interviews & Statement Taking

8 Module 5A: Documentation

Notebook Maintenance & Legal Implications 24-Hour Clock & Phonetic Alphabet Report Writing (Shift, Incident & Traffic Collision) Mandatory Reports to the Registrar

9 Module 5B: Evidence & Court

Types of Evidence Crime Scene Preservation Preparing for & Testifying in Court

10 Module 6A: Alarm Systems

Alarm Systems & Components Types of Alarm Sensors Responding to Alarms & Off-Site Response

11 Module 6B: Fire, Bomb & Evacuation

Fire Emergency Management Fire Extinguisher Types & PASS Method Bomb Threat Procedures & Checklist Evacuation Procedures

12 Module 7: Health & Safety

Personal Safety Practices Risk Assessment (Low, Medium, High) Identifying Workplace Hazards Emergency Response Safety Shift Work Effects on Health & Wellbeing Managing Shift Work Challenges

Traffic Control Procedures & Signals

Key Takeaways Explain This Topic AI

Security guards directing traffic have authority only on private property — they cannot stop or control vehicles on public roads

Standard hand signals (stop, go, slow, turn) and whistle use must be given from a visible, safe stance with an escape route

Portable stop/slow paddles supplement hand signals and are more visible to drivers at distance than hands alone

High-visibility vests are mandatory for traffic duties; never stand in the path of a moving vehicle without a clear escape path

Coordination with public-road traffic is limited to requesting police or authorized traffic-control support — guards do not direct public traffic themselves

Last updated: August 2026

The Scope of a Guard's Traffic Authority

The single most important rule in this section: a security guard has authority to direct traffic only on private property. A guard can manage vehicles in a parking lot, at a site entrance, or on private internal roads. A guard cannot stop, slow, or direct vehicles on a public roadway.

Public-road traffic control is the authority of police officers and authorized traffic-control personnel (flag persons working under a traffic-control plan approved by the road authority). If a site's traffic plan requires stopping public traffic — for example, to let trucks turn out of a site onto a busy street — the site must arrange police or certified traffic control , not just post a guard at the curb.

Hand Signals

Hand signals are the universal language of traffic direction. They must be deliberate, exaggerated, and held long enough for drivers to read at distance.

  • Signal Hand and Body Position Meaning to Driver
  • STOP Right arm extended straight, palm flat toward driver, fingers up; face the driver Stop and hold position

GO / PROCEED Arm sweeping from the stop position toward the direction of travel, palm open Proceed in the indicated direction

  • SLOW Arm extended downward at an angle, palm down, with a patting motion Reduce speed; do not stop
  • TURN (left/right) Point with the index finger in the direction the driver should turn Take the indicated turn

Loading diagram...

Whistle Use

The whistle supplements hand signals — it gets attention, it does not replace the hand signal. Standard whistle codes:

  • One short blast — get the driver's attention ("look at me")
  • One long blast — STOP
  • Two short blasts — GO / proceed
  • Repeated short blasts — emergency stop / hazard

Never whistle near a driver's ear or use the whistle to intimidate. It is a communication tool, not a weapon.

Positioning and Safety

Where you stand is as important as what you signal. A driver who cannot see you cannot obey you.

Be visible — wear a high-visibility (hi-vis) vest at all times; it is mandatory, not optional

Stand where drivers expect to see a controller — typically at the driver's left-front or right-front, never behind a vehicle

Use a safe stance — feet shoulder-width apart, balanced, ready to move

Keep an escape route — never stand in the path of a moving vehicle with no way out; always have a clear space to step to

Never stand between two moving vehicles — if a line of cars is moving, control it from the side, not from inside the column

  • Make eye contact with the driver before signalling them to move; confirm they see you
  • Portable Stop/Slow Paddles

A portable stop/slow paddle is a double-sided sign — STOP on one face, SLOW on the other — mounted on a handle. Paddles are more visible than hand signals at distance and in poor light, and they reduce ambiguity because the message is printed, not gestured.

Use the paddle when:

  • Drivers are more than ~30 metres away and hand signals may be hard to read
  • Conditions are low light, rain, or fog
  • You are managing intermittent two-way flow on a single lane (flip STOP/SLOW to alternate directions)
  • Truck drivers in high cabs need a clear, elevated signal

Hold the paddle high and steady with the correct face toward oncoming traffic. Do not wave it — a moving sign is harder to read than a still one.

Coordinating with Public-Road Traffic

When your site's traffic interacts with a public road, your authority ends at the property line. Common scenarios:

Trucks turning out of a site onto a public road — the truck driver must yield to public traffic; you may signal the truck when it is safe to begin the turn, but you may not stop public traffic to clear the truck's path. If public traffic must be held, arrange police or certified traffic control .

A special event that affects a public road — permits and police/traffic-control coordination are required in advance; guards direct traffic only on the event site , not on the closed public road unless separately authorized as traffic-control personnel under the approved plan.

An emergency creating a hazard on the public road — call police and, if safe, warn approaching drivers; do not attempt to take over direction of the roadway.

Documentation

Log every traffic-control assignment: location, time, weather, volume, any incidents or near-misses, and any interaction with public-road traffic or police. If a driver refuses to obey a signal on private property, record the plate, vehicle description, and direction of travel — do not pursue onto a public road.