Study guide
6.2 CEQA Process: Statutory & Categorical Exemptions, Initial Studies, and (Mitigated) Negative Declarations
California Supplemental Examination CSE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: California Architects Practice Act & Professional Practice
1.1 Licensing, Board Authority, and Unlicensed Practice Exceptions 1.2 Mandatory Written Contracts & Required Provisions 1.3 Architect's Stamp, Signature, and Professional Liability
2 Chapter 2: Professional Conduct, Ethics & Business Entities
2.1 Rules of Professional Conduct & Disciplinary Grounds 2.2 Permissible Business Entities, Firm Names, and Filing Requirements 2.3 Copyright, Instruments of Service & Ownership of Architectural Documents
3 Chapter 3: Contractual Roles, Scope & Consultant Agreements
3.1 Standard Owner-Architect Agreements (AIA B101 / B102) & California Practice Realities 3.2 Consultant Selection, Prime-Consultant Agreements & Liability Flow-Down (AIA C401) 3.3 Project Delivery Methods & Impact of Project Funding Sources
4 Chapter 4: Risk Management, Dispute Resolution & Project Planning
4.1 Professional Standard of Care & Managing Contractual Risk and Liability 4.2 Dispute Resolution in California Practice: Mediation, Arbitration, and Litigation 4.3 Project Scheduling, Budgeting Assumptions, and Milestone Approvals
5 Chapter 5: Site Feasibility, Schematic Design & Discretionary Approvals
5.1 Site Feasibility Studies, Existing-Conditions Due Diligence & Project Impacts 5.2 Programming, Schematic Design Development & Stakeholder Engagement 5.3 Local Land-Use Control: General Plans, Zoning, Specific Plans & Local Ordinances 5.4 The Discretionary Approval Process: Use Permits, Variances, Design Review & Hearings 5.5 Entitlement Exhibits, Conditions of Approval & Leading the Approval Team
6 Chapter 6: Environmental Review & CEQA Compliance
6.1 CEQA Regulatory Framework: Lead, Responsible, and Trustee Agencies 6.2 CEQA Process: Statutory & Categorical Exemptions, Initial Studies, and (Mitigated) Negative Declarations 6.3 Environmental Impact Reports (EIR) & Official Filings (NOP, NOC, NOD, NOE)
7 Chapter 7: California Coastal Act & Specialized Regional Regulations
7.1 California Coastal Commission & Coastal Development Permits (CDP) 7.2 Local Coastal Programs (LCP), Coastal Zone Boundaries, and Appeals 7.3 Clean Air Act (CARB/AQMDs) & Clean Water Regulations (Porter-Cologne, RWQCB & SWPPP)
8 Chapter 8: State Agency Jurisdictions: DSA, HCAI & Essential Services
8.1 Division of the State Architect (DSA): Field Act & Public K-12/Community College Oversight 8.2 Department of Health Care Access and Information (HCAI): Alfred E. Alquist Act & Healthcare Facility Classification 8.3 Essential Services Buildings Seismic Safety Act (ESBSSA) & California Historical Building Code (CHBC)
9 Chapter 9: California Building Code (CBC Title 24 Part 2) Core Architecture Provisions
9.1 Occupancy Classifications, Building Heights, and Allowable Floor Areas (CBC Chapters 3 & 5) 9.2 Fire and Smoke Protection Features, Fire Barriers, and Fire-Resistance Ratings (CBC Chapter 7) 9.3 Means of Egress, Occupant Load Calculations, and Exit Separation (CBC Chapter 10) 9.4 California Health and Safety Code: Building Standards Law, State Housing Law & Health Mandates
10 Chapter 10: Accessibility Requirements: Title 24 Chapter 11B & ADA
10.1 California Accessibility Framework: CBC Chapter 11B vs Federal ADA Standards 10.2 Accessible Routes, Entrances, Parking, and Site Arrival Points 10.3 Accessible Restrooms, Signage, Scoping, and Path of Travel Alteration Thresholds
11 Chapter 11: California Site Conditions & Natural Hazards
11.1 Seismic Hazard Mapping: Alquist-Priolo Earthquake Fault Zoning Act & Liquefaction 11.2 Wildland-Urban Interface (WUI) & Fire Hazard Severity Zones (CBC Chapter 7A & CFC Part 9) 11.3 Flood Hazard Zones (FEMA/DWR) & California Wind Exposure Categories
12 Chapter 12: Energy Efficiency: California Energy Code (Title 24 Part 6)
12.1 Energy Code Compliance Approaches: Prescriptive vs Performance & Time Dependent Valuation (TDV) 12.2 Mandatory Energy Measures: Envelope, HVAC, Lighting, Solar PV & Energy Storage Systems
13 Chapter 13: Sustainability (CALGreen) & Systems Integration
13.1 CALGreen (Title 24 Part 11) Mandatory Nonresidential & Residential Green Building Measures 13.2 Life-Cycle Cost Analysis (LCCA) & Value Engineering in California Practice 13.3 Building Systems Integration: MEP Coordination, Materials Evaluation & Acoustic Control
14 Chapter 14: Construction Document Requirements & Regulatory Coordination
14.1 CD Content, Detailing & Inter-Disciplinary Coordination for Agency Approval and Bidding 14.2 Authority Having Jurisdiction (AHJ) Hierarchy, Local Amendments & Local Finding Requirements 14.3 Reconciling Conflicting Codes, Standards, and Regulatory Mandates
15 Chapter 15: Plan Check & Permitting Processes
15.1 Permitting Procedures, Plan Check Review, Agency Comment Inquiries & Approval Pathways 15.2 Phased Permitting, Deferred Approvals, Encroachment Permits & Public Right-of-Way Coordination
16 Chapter 16: California Public Contract Code & Bidding Procedures
16.1 Public Works Bidding, Competitive Bidding Thresholds & Responsive vs Responsible Bidders 16.2 Subletting and Subcontracting Fair Practices Act & Subcontractor Listing Rules (PCC §§ 4100–4114) 16.3 California Prevailing Wage Requirements, DIR Registration & Certified Payroll Records
17 Chapter 17: California Mechanics Lien Law & Payment Remedies
17.1 20-Day Preliminary Notice Requirements & Timing (Civil Code § 8200) 17.2 Mechanics Liens, Recording Deadlines & Impact of Notice of Completion (Civil Code §§ 8400–8494) 17.3 Stop Payment Notices, Payment Bonds & Design Professional Liens (Civil Code §§ 8300–8319, 9350–9566)
18 Chapter 18: Construction Administration: Pre-Construction, Submittals, Changes & Field Observation
18.1 Pre-Construction & Pre-Installation Meetings and the Construction Manager's Impact on Services 18.2 Shop Drawings, Submittals & Architect's Deferred Submittal Review and Stamp 18.3 Construction Changes: Change Orders (CO), CCDs, ASIs & DSA Category A/B CCDs 18.4 Periodic Site Observations, Field Reports & the Means-and-Methods Boundary
19 Chapter 19: Inspection, Close-Out & Post-Construction Services
19.1 Special Inspections, Testing (CBC Chapter 17) & DSA/HCAI Continuous Field Inspection 19.2 Project Close-Out, Payment Applications (G702/G703), Retainage & California Warranty/Defect Limitations (CCP §§ 337.1 & 337.15) 19.3 Post-Construction Services, Record Documents & the Warranty Period 19.4 Construction Industry Standards, Detailing & Referenced Standards
6.2 CEQA Process: Statutory & Categorical Exemptions, Initial Studies, and (Mitigated) Negative Declarations
Key Takeaways Explain This Topic AI
The CEQA environmental review process operates as a three-step progression: Step 1 (Exemption determination), Step 2 (Initial Study leading to ND or MND), and Step 3 (Preparation of an EIR).
Statutory exemptions are established by the Legislature and are absolute, applying regardless of environmental impact, whereas Categorical Exemptions (Classes 1-33) can be disqualified by any of six statutory exceptions under CEQA Guidelines § 15300.2.
Key categorical exemptions in architecture include Class 1 (Existing Facilities), Class 2 (Replacement or Reconstruction), Class 3 (New Construction of Small Structures), and Class 32 (Urban In-Fill Development).
An Initial Study evaluates environmental impacts across 20+ resource areas using the Appendix G Environmental Checklist; if potentially significant impacts can be mitigated to less than significant through agreed design changes, a Mitigated Negative Declaration (MND) is prepared.
Under PRC § 21081.6, approval of an MND or EIR legally mandates adoption of a Mitigation Monitoring and Reporting Program (MMRP), which architects must translate directly into construction drawings and project specifications.
Last updated: September 2026
CEQA Process: Statutory & Categorical Exemptions, Initial Studies, and (Mitigated) Negative Declarations
Quick Answer: CEQA environmental review follows a structured three-step evaluation process : Step 1 determines whether a project is exempt under statutory or categorical classifications. Step 2 conducts an Initial Study (IS) using the Appendix G checklist to determine environmental significance. If no significant impacts exist, the agency adopts a Negative Declaration (ND) ; if potentially significant impacts can be mitigated through project revisions agreed to prior to public release, a Mitigated Negative Declaration (MND) is prepared with an enforceable Mitigation Monitoring and Reporting Program (MMRP) . If unmitigated significant impacts remain, the agency must proceed to Step 3 and prepare an Environmental Impact Report (EIR).
1. The Three-Step CEQA Process Framework
Pursuant to CEQA Guidelines § 15002(k) , public agencies follow a sequential three-step methodology when reviewing any proposed activity: ┌────────────────────────────────────────────────────────────────────────┐
- │ STEP 1: PRELIMINARY REVIEW │
- │ Is the action a "Project"? If yes, is it Exempt? │
- │ • Statutory Exemptions (Legislative, Unconditional) │
- │ • Categorical Exemptions (Classes 1-33, subject to § 15300.2 exceptions)│
- └───────────────────────────────────┬────────────────────────────────────┘
- │ [If NOT Exempt]
- ▼
- ┌────────────────────────────────────────────────────────────────────────┐
- │ STEP 2: THE INITIAL STUDY │
- │ Conduct fact-based assessment using Appendix G Environmental Checklist│
- └───────────────────┬───────────────────────────────┬────────────────────┘
- │ │
- [No Significant Impacts] [Mitigable Impacts]
- │ │
- ▼ ▼
- Negative Declaration (ND) Mitigated Negative Declaration
- Public Review: 20-30 Days • Applicant agrees to revisions
- Adopt mandatory MMRP
- Public Review: 20-30 Days
- │
- ▼ [If Unmitigated Impacts]
- ┌────────────────────────────────────────────────────────────────────────┐
- │ STEP 3: FULL EIR PREPARATION │
- │ Prepare Environmental Impact Report due to Fair Argument of │
- │ potentially significant environmental effects (Guidelines § 15080) │
- └────────────────────────────────────────────────────────────────────────┘
- 2. Statutory vs. Categorical Exemptions
When a public agency determines that a proposed activity is a discretionary project, it immediately checks whether the project qualifies for an exemption from CEQA review.
Statutory Exemptions (PRC § 21080 et seq.; Guidelines Article 18)
Statutory exemptions are enacted directly by the California Legislature through statute. They reflect legislative policy determinations that designated activities are of overriding public urgency or specialized character:
Absolute Protection: Statutory exemptions are unconditional . They apply regardless of potential environmental impact, sensitive location, or public controversy.
Prominent Examples:
Ministerial Projects (§ 15268): Standard building permits and prescriptive plan checks.
Emergency Projects (§ 15269): Immediate emergency repairs to public service facilities damaged by disaster, or emergency actions necessary to prevent life-safety hazards.
Feasibility and Planning Studies (§ 15262): Architectural feasibility analyses or preliminary planning studies for future actions not yet funded or approved.
Statutory Housing Streamlining: Qualified affordable housing developments meeting strict statutory criteria under legislative enactments (e.g., SB 35, SB 684) that provide streamlined administrative review.
Categorical Exemptions (CEQA Guidelines Article 19, Classes 1–33)
Categorical exemptions are broad classes of projects that the Secretary for Resources has determined do not typically cause significant environmental impacts. Unlike statutory exemptions, categorical exemptions are conditional and can be disqualified by specific environmental conditions.
Key Categorical Exemptions Relevant to Architecture
Class 1: Existing Facilities (Guidelines § 15301): Interior or exterior alterations, mechanical retrofits, seismic upgrades, and additions up to 2,500 square feet (or up to 50% of existing floor area or 10,000 square feet in urbanized areas with all public utilities).
Class 2: Replacement or Reconstruction (Guidelines § 15302): Rebuilding existing structures on the same site with substantially the same purpose and capacity.
Class 3: New Construction of Small Structures (Guidelines § 15303): Up to three single-family homes in an urbanized area (or one in a rural area); multi-family structures up to four dwelling units ; commercial buildings up to 2,500 square feet (or up to 10,000 square feet in urbanized areas with utilities, zoned for use, and not involving hazardous substances); and accessory structures (garages, fences).
Class 11: Accessory Structures (Guidelines § 15311): On-premise signs, fences, and small parking lots appurtenant to existing facilities.
Class 31: Historic Resource Rehabilitation (Guidelines § 15331): Rehabilitation conforming strictly to the Secretary of the Interior's Standards for the Treatment of Historic Properties .
Class 32: In-Fill Development Projects (Guidelines § 15332): Infill projects that meet five criteria: (a) consistent with General Plan/zoning; (b) within city limits on no more than 5 acres surrounded by urban uses; (c) no value as habitat for endangered species; (d) no significant traffic, noise, air, or water effects; and (e) adequately served by utilities.
3. The Six Disqualifying Exceptions to Categorical Exemptions (Guidelines § 15300.2)
A categorical exemption cannot be used if a project falls under any of six statutory exceptions in CEQA Guidelines § 15300.2 :
Location in Sensitive Environment (§ 15300.2(a)): Applies to Classes 3, 4, 5, 6, and 11 where the site is in an officially designated environmental resource area (e.g., wetlands, critical habitat).
Cumulative Impact (§ 15300.2(b)): Successive projects of the same type in the same place over time become significant.
Unusual Circumstances (§ 15300.2(c)): The Berkeley Hillside exception: reasonable possibility of a significant effect due to unusual circumstances (e.g., extreme soil instability).
Scenic Highways (§ 15300.2(d)): Damage to scenic resources (trees, rock outcroppings, historic buildings) within an officially designated state scenic highway.
Hazardous Waste Sites (§ 15300.2(e)): Any site included on the state "Cortese List" (Government Code § 65962.5).
Historical Resources (§ 15300.2(f)): Substantial adverse change in the significance of an official historical resource (PRC § 21084.1).
4. Step 2: The Initial Study (IS) & Appendix G Checklist
When a project is not exempt, the Lead Agency conducts an Initial Study (IS) pursuant to Guidelines § 15063 using the checklist in Appendix G to evaluate potential adverse impacts across resource sectors: Aesthetics, Air Quality, Biological Resources, Cultural and Tribal Cultural Resources (AB 52), Geology/Soils, Greenhouse Gas Emissions, Hazards/Hazardous Materials, Hydrology/Water Quality, Noise, Transportation, and Wildfire.
SB 743 Transportation Metric: VMT
Under California Senate Bill 743 , transportation analysis replaced automobile congestion (Level of Service - LOS) with Vehicle Miles Traveled (VMT) . Transit-oriented infill developments are presumed to cause less than significant VMT impacts.
Four Checklist Findings
For each checklist question, the Lead Agency establishes one finding: (1) No Impact ; (2) Less Than Significant Impact ; (3) Less Than Significant with Mitigation Incorporated ; or (4) Potentially Significant Impact (requiring an EIR).
5. Negative Declarations (ND) vs. Mitigated Negative Declarations (MND)
Negative Declaration (ND) (PRC § 21080(c)(1)): Prepared when the Initial Study shows no substantial evidence that the project may cause a significant environmental effect. Public review is 20 days minimum (30 days if State Clearinghouse review applies).
Mitigated Negative Declaration (MND) (PRC § 21080(c)(2)): Prepared when the Initial Study identifies potentially significant effects, but: (1) project plans are revised before public release to eliminate or reduce effects to less than significant, and (2) there is no substantial evidence the revised project has a significant effect.
California Exam Rule: In an MND, the applicant must agree in writing to proposed mitigation measures prior to public release of the draft document. If the applicant refuses, the Lead Agency cannot adopt an MND and must require an EIR.
6. Mitigation Monitoring and Reporting Program (MMRP)
Under PRC § 21081.6 , approving an MND or EIR legally mandates adopting an MMRP . The MMRP guarantees that required mitigations are implemented during design, construction, and operation.
The Architect's Legal Responsibilities
Integration into Documents: The architect must incorporate mitigation measures into drawings and CSI specifications (e.g., sound-attenuating STC wall assemblies, bird-safe glazing, biofiltration planters, dark-sky lighting fixtures).
Jobsite Coordination: Coordinating construction access for specialty monitors (biologists, archaeologists, tribal monitors).
Field Verification: Observing construction compliance (AIA B101 § 3.6) to assist the owner in securing municipal mitigation sign-offs for certificates of occupancy.
7. Comparison Table: Exemption and Environmental Document Pathways
Review Pathway Legal Basis Environmental Impact Level Public Review Period Monitoring Program (MMRP) Required?
- Statutory Exemption PRC § 21080 et seq. Excluded by Legislature regardless of impact None No
- Categorical Exemption Guidelines Art. 19 Presumed negligible; voided by § 15300.2 exceptions None No
- Negative Declaration (ND) Guidelines § 15070(a) Initial Study finds no significant impact 20–30 Days No
Mitigated Neg. Dec. (MND) Guidelines § 15070(b) Potentially significant, but mitigated before public release 20–30 Days YES (PRC § 21081.6)
Environmental Impact Report Guidelines § 15080 Fair argument of unmitigated significant effect 30–45 Days YES (PRC § 21081.6)
8. CSE Exam Traps & Practical Takeaways
Trap 1: Exemption Disqualifiers: A remodel matching Class 1 or Class 3 is immediately disqualified if located on a Cortese List site or impacting a historic resource.
Trap 2: Timing of MND Mitigation Agreement: Design revisions must be agreed to in writing before the MND is circulated for public review.
Trap 3: LOS vs. VMT: Roadway delay and Level of Service (LOS) no longer constitute environmental impacts under CEQA; Vehicle Miles Traveled (VMT) is the sole statutory metric.